武钢四烧工程多目标优化方法烧结试验

采用二次回归正交设计进行烧结试验，获得了七个目标的数学模型，并验证了其可靠性，用多目标计算机选优法对四烧车间的工艺参数进行了选优。     

基于小波基优化和动态比特分配的数字音频压缩编码方案

提出了一种新颖的基于自适应小波基优化选择和心理声学模型相结合的数字音频信号的透明质量编码方法，保证固定失真水平上使每帧信号的变换系数的动态分配的比特数最少，并且利用动态码本的方法来消除音频信号的统计冗余，进一步压缩比特率，对于抽样率为４４．１ｋＨｚ每样值用１６比特线性码表示的光盘单声道音乐信号可以压缩到６４ｋＢＰＳ左右。     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

由1,4-萘醌催化合成1,4-二烷氧基萘-2,3-二甲腈

研究了以 1 ,4-萘醌为原料 ,通过溴代、氰化和 O-烷基化三步合成 1 ,4-二烷氧基萘 -2 ,3 -二甲腈。在溴代反应中以溴化试剂代替液溴 ;在氰化和 O-烷基化反应中以溴化十二烷基三甲基铵 (DTMAB)和聚乙二醇(PEG)作为相转移催化剂 ,并采用正交设计法考察了相转移催化剂、固体碱、反应温度等因素对反应的影响 ,其中氰化产物收率达 88.7%。     

激光相变硬化性能与工艺参数关系的数学模型

用回归正文分析的方法．建立了中碳结构钢、碳素工具钢和合金结构钢的激光相变硬化性能与工艺参数间关系的数学模型。分析了回归力程的显著性并预测了各硬化指标的精度。     

一种适用于高数据速率和高速移动环境的新型信道估计方法——双正交通道信道估计方法

本文给出了一种适用于高数据速率和高速移动环境下的新型有效的信道估计方法-双正交通道信道估计方法(CETOC,Channel Estimation by using Two Orthogonal Channels),这种信道估计方法通过采用两个独立通道的联合估计,可以有效的克服快衰落的影响,从而使得在快衰落信道下应用多维状态调制成为可能.     

Brittle detachment of a stiffener bonded to an elastic plate

The diffusion of contact stresses between an elastic bar, bonded to an elastic half-plane and loaded longitudinally, requires the integration of a singular integral equation. The solution of this equation is not available in closed form, but only by a series expansion of the contact tangential force mutually transmitted between the stiffener and the plate. Since forty years it has been realized that the expansion of the solution in terms of Chebyshev polynomials is its most convenient method of representation. The procedure can also be extended to treat the brittle detachments of the tips of the stiffener when, according to Griffith's criterion of fracture, a balance can be virtually established between the increase of strain energy due to a propagation of cracks and the surface energy created.     

Time-Space Label Switching Protocol (TSL-SP)—A New Paradigm of Network Resource Assignment

In this paper we propose a new protocol called time-space label switching protocol (TSL-SP) in optical burst switching (OBS), and define the terms time-space label (TSL) and time-space routing (TSR). An important concept of response time is introduced in the time label mechanism. The TSL-SP is a new technology that can quickly and efficiently forward data with a label on the optical networks. A two-dimension label switched path (TD-LSP) can be set up, that is maintained and deleted by the TSL-SP. For clearly illuminating the operation principles of the TSL-SP, we propose a new approach of orthogonal time-space coordinates in which the vertical coordinate is the space label and the horizontal coordinate is the time label. The proposed TD-LSP can dramatically reduce the routing failure probability and greatly improve the link network efficiency compared with other signaling protocols. Moreover, we define the time-space label control plane that can achieve the higher efficiency. When the TSL-SP is applied to networks, switching performance can be improved by two orders compared to the switching performance with the conventional OBS signaling protocols. The fundamental goal of TSL-SP is to band the signaling and routing functions together closely. Also, the TSL-SP can reduce the complexity of the network, support automatic service offering, and provide traffic engineering.     

OFDM系统信道盲估计的一种新算法

利用循环前缀（CP）引入的信息冗余，在利用接受信号的二阶统计特性实现正交频分复用（OFDM）系统信道盲估计的子空间算法基础上，采用矩阵变换的方法，改善信息序列的非周期相关函数，推导出信道估计的新算法。