Multicomponent Bioluminescence Imaging with Naphthylamino Luciferins

Bioluminescent tools have been used for decades to image processes in complex tissues and preclinical models. However, few distinct probes are available to probe multicellular interactions. We and others are addressing this limitation by engineering new luciferases that can selectively process synthetic luciferin analogues. In this work, we explored naphthylamino luciferins as orthogonal bioluminescent probes. Three analogues were prepared using an optimized synthetic route. The luciferins were found to be robust emitters with native luciferase in vitro and in cellulo. We further screened the analogues against libraries of luciferase mutants to identify unique enzyme-substrate pairs. The new probes can be used in conjunction with existing bioluminescent tools for multi-component imaging.     

基于数值模拟的等效拉延筋设计与优化

拉延筋在汽车覆盖件拉深成形中起着十分重要的作用。利用拉延筋可以在较大范围内调节和控制板料的变形程度和变形分布,抑制破裂、起皱、面畸变等多种冲压质量问题的产生。在很多情况下,拉延筋的设置合理与否将决定覆盖件拉深的成败。文章借助eta/DYNAFORM软件,模拟某轿车B柱加强板在无/有拉延筋的模具上进行拉深的全过程,通过模拟结果分析比较,确定拉延筋的合理布局及数量,最后结合正交实验法,优化拉延筋的结构参数。     

用正交实验设计研究Zr—Nb合金的耐蚀性

利用正交设计实验的方法安排了一组Ｚｒ－Ｎｂ二元合金，考查了两个水平的Ｎｂ含量，淬火温度，时效温度，时间以及合金组织状态对耐蚀性能的影响，５００℃蒸汽腐蚀结果表明，Ｎｂ含量控制在固溶极限范围内Ｚｒ－Ｎｂ二元含金具有较佳的耐蚀性，而当Ｎｂ含量较高时，采用双相区淬火，较高温度长时间时效处理是获得较好耐蚀性的工艺方向。     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

SMB色谱分离过程计算机仿真

针对模拟移动床(SMB)综合速率模型，采用有限元法和正交配点法分别对柱向和颗粒径向模型进行离散化，利用MatLab ODE求解器对SMB过程进行数值求解。通过仿真，验证了该方法的可行性。     

醇-水法制备纳米NiO粉末的正交实验研究

纳米NiO粉末具有良好的催化性能、热敏性能及在各种材料中的加工性能,因而被广泛地应用在催化剂、磁性材料、电子元件材料等方面,是一种很有前途的新型功能材料。选用Ni(NO3)2.6H2O为原料,以NH4HCO3为沉淀剂,在醇-水介质中制得了纳米NiO粉末。通过扫描电子显微镜(SEM)对NiO粉末进行了表征。实验过程中,按正交表L8(27)安排了正交实验,通过方差分析确定了醇-水制备纳米NiO粉末的最佳煅烧时间、煅烧温度和醇-水比,并确定了各因素对制备过程的影响程度。     

利用粉煤灰生产SiC陶瓷原料

利用粉煤灰部分或全部代替石英砂,配以适量的锯末,在高温炉中特定的烧成制度下,采用SiO2-C还原法将粉煤灰中的二氧化硅与锯末中的碳结合制取高性能的SiC陶瓷原料。利用正交实验对合成工艺中的合成温度、保温时间、碳过量数进行了设计和探索性实验,并对合成产物中的碳化硅的含量进行了测试。研究表明,在经催化剂(FeCl26H2O)浸泡12小时,加入2%矿化剂,在1380℃的合成温度下,保温时间2小时,碳过量10%的情况下,生成的SiC陶瓷原料中SiC的含量在53.6%以上。     

纳米Al2O3,ZnO,CeO2,ZrO2对低温无铅熔块性能的影响

采用正交实验法,研究了在无铅基础熔块中,添加纳米Al2O3,ZnO,CeO2,ZrO2对其抗弯强度、维氏硬度及化学稳定性等性能的影响。结果表明:外加纳米氧化铝等可使无铅熔块抗弯强度提高30%,化学稳定性提高60%～80%,硬度提高10%左右。     

正交试验法在PAN原丝纺丝工艺中的应用

利用正交设计方法确定了PAN湿法纺丝过程中影响原丝性能最主要的因素。结果表明 :以计量泵转速、凝固浴温度、负拉伸以及蒸汽拉伸倍数作为考察对象 ,影响原丝性能的最显著因素是蒸汽拉伸倍数 ,其次是负拉伸。以负拉伸、第二拉伸、第三拉伸以及蒸汽拉伸的倍数作为考察对象 ,影响原丝性能最显著的是蒸汽拉伸倍数 ,负拉伸几乎没有影响。利用正交实验结果 ,适当调节蒸汽拉伸倍数 ,制得强度为 6.5～ 7.0cN/dtex ,线密度为 1.1～ 1.3dtex的原丝     

S-苄基-L-半胱氨酸的合成

由溴化苄和L-半胱氨酸直接合成S-苄基-L-半胱氨酸,通过正交试验及统计分析,检验了各影响因子的显著性,确定了最佳工艺条件为：反应时间2.5h,反应温度45℃,原料配比n（溴化苄）：n（L-半胱氨酸）=1：1.在此条件下反应,摩尔产率可达到95%.