普钙产品转化率的数值计算方法

对影响普钙产品转化率的各种因素进行了分析,利用MATLAB 软件包得到了转化率的计算公式,提出了确定未分解磷矿的比例和由倍半氧化物引起的有效磷退化幅度的方法,为生产系统的预测和调整提供了一种途径。     

转化乳剂的离子电导和光电导研究

本文研究了ＡｇＢｒＣｌ转化乳剂的离子电导和光电导。随着乳剂中溴含量的增高，其离子电导也随之升高，而光电子寿命则降低。ＡｇＢｒＣｌ乳剂的离子电导主要取决于其组成；ＡｇＢｒＣｌ转化乳剂的光电子寿命主要受隙间银子浓度的影响，隙间银离子浓度越大，光电子寿命越短。     

Free radicals in coal and coal conversions. 8. Experimental determination of conversion in hydroliquefaction

The results of conversion determinations on the products from Powhatan No.5 coal liquefied in an autoclave and in a high-pressure, high-temperature e.s.r. cavity are reported. Oil, asphaltene and preasphaltene yields, and overall conversion have been determined for Powhatan No.5 coal samples liquefied in tetralin, SRC-11 heavy distillate, and naphthalene at temperatures from 400 to 480 ° C in both reactor systems. The concept of reaction severity is introduced and used to formalize the relation between the effect of temperature and reaction time on oil yield and conversion. Oil is the predominant product in liquefaction in tetralin or naphthalene, asphaltene is the major product of liquefaction in SRC-II heavy distillate. Retrogressive reaction (THF-insoluble product formation) becomes severe when SRC-II heavy distillate is the liquefaction solvent and residence time of >10 min are used at temperatures >450 °C. Preasphaltenes appear to be the only intermediate species in Powhatan No.5 liquefaction.     

Preparation,characterization, and some physical properties of polypropylene/poly(methyl acrylate)‐grafted glass wool composites

Polypropylene/poly(methyl acrylate)‐grafted glass wool (PMA‐g‐GW) mixes were prepared. The polymerization process was carried out using potassium persulfate (PPS) and PPS/acetone sodium bisulfite (ASBS) as a redox‐pair initiation system at 60 and 70°C. The effect of using PPS or PPS/ASBS on the grafting percent and conversion percent reveals that the conversion percent values on using PPS as an initiator are higher than those of PPS/ASBS, while in the case of grafting, the inverse is true, that is, using PPS as an initiator gives grafting percent values lower than those that can be obtained using PPS/ASBS. The dielectric properties, thermal diffusivity, specific heat capacity, and thermal conductivity of PP loaded with modified glass wool as a function of different types and concentrations of initiators—used in the grafting polymerization process, namely, PPS and the redox initiating system—were also studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 723–732, 2003     

Mechanosynthesis of complex oxides and preparation of mixed conducting nanocomposites for catalytic membrane reactors

Nanopowders of LaGaO₃- and LaMnO₃-based complex perovskites (P) and ceria-based fluorites (F) were prepared by mechanosynthesis. Compatible nanocomposites F + P and P + P with mixed ion and electron conducting (MIEC) properties were prepared and sintered at moderate temperatures up to dense ceramics. The obtained materials were studied by means of XRD, SEM, TEM, electrical conductivity measurements, temperature programmed (TP) reduction/oxidation and preliminary estimations of permeability were obtained. A new strategy based on the advantages of the mechanochemical ceramic approach is proposed to design multilayer ceramic membranes for CMR. Casting technology and one-step sintering were used for the production of thin film membranes with MIEC properties on porous substrates. The coarse fraction of as-milled powders from agglomerates with density 70% was used for the porous substrate, and fine fractions of aggregates with sizes <1 μm were used in preparation of composites for thin dense films. Ceria-based composites prepared by the Pechini route and/or mechanochemical method are proposed as materials for protecting thin films.     

软起动器和变频器的时分多机复用技术及其应用

本文提出了时分多机复用的概念，并对其技术和应用加以具体说明，展现了该技术良好的应用前景。     

考虑桩顶水平反力的水平受荷单桩弹塑性解析解

基于线性地基反力法和土体的弹塑性本构关系,对桩顶水平反力系数不为零时的水平受荷桩进行了研究,给出了桩顶土屈服临界荷载（水平力、弯矩）的耦合关系式。研究结果表明,当荷载大于临界荷载时,桩顶土发生塑性屈服,其塑性屈服深度随荷载的增加而增加,但其塑性区扩展速率随桩顶荷载的增加而逐渐减小。给出了弹性区与塑性区桩内力耦合的矩阵方程及其迭代求解格式;利用曲面拟合软件给出了塑性区换算深的计算公式。通过工程算例验证,证明该方法可靠快捷,便于手算,值得推广。      

微控制器中按键处理技巧及应用

针对微控制器中按键处理问题。列举不同场合对按键处理的设计优化。重点讨论了非编码键盘的抖动及干扰消除优化。结合ADC按键,设计一种新型软件滤波方法一阀值平滑滤波,详细介绍了其软硬件的实现过程。通过验证,此方法既能有效扩展键盘又能实现消抖,有效提高微控制器资源的利用。     

多相DC-DC电路中PWM控制技术的研究

本文对多相DC-DC电路中的PWM控制技术进行了研究,对电压型PWM控制和电流型PWM控制进行了简单比较,提出了基于快速主动均流技术的电流型控制方法,并将这种方法应用于工程设计。实验证明,采用快速主动均流技术消除了器件性能不一致带来的影响。     

电-热-氢综合能源系统鲁棒区间优化调度

该文采用鲁棒区间法挖掘电-热综合能源系统协调运行的潜力,以缓解风电功率的不确定性对电力系统的运行稳定性的影响,并构建风力发电与氢储能系统相结合的风-氢混合系统,考虑氢储能系统的热平衡需求,以充分发挥氢储能系统的储能效率,平抑风电的波动性。首先,介绍了考虑氢储能系统接入的电-热综合能源系统结构,并构建其数学模型;然后,以区间形式考虑风电的不确定性,构建含风电的鲁棒区间优化调度模型,使系统在所有风电出力允许区间内,均满足允许约束条件;再次,建立一种含风-氢混合系统的电-热综合能源系统鲁棒区间优化调度模型,采用对偶理论将原模型转化为单层模型进行求解,最坏情况下的风电不平衡功率由可调机组根据时变参与因子进行调整;最后,以PJM-5节点电力系统与6节点热力系统和辽宁省北部太和综合能源系统为例对所提模型进行分析,验证了模型的有效性。