EPON:下一代接入网的最佳选择

EPON技术具有大带宽、高性价比、结构简单和一定服务质量保证等特点,被业界普遍看好,成为 下一代接入网的最佳候选技术.本文主要介绍了EPON的工作原理、分层结构、接入控制和组帧方式,最后给出 了实现EPON的关键技术和难点以及EPON的发展近况.     

基于模型正演的叠前深度偏移

川西龙门山前缘构造非常复杂，逆掩推覆构造带构造形变强烈，构造幅度大，地层倾角陡，断块发育，波场复杂，速度横向变化大，常规叠后时间偏移处理成像效果较差。文章将地震资料模型正演技术应用到叠前深度偏移，探讨了一种有助于川西龙门山前缘逆掩推覆构造地震资料精确成像技术。先利用已有地震资料解释成果，根据地质任务建立二维地质模型，在此基础上进行射线追踪、模拟出单炮地震记录和自激自收剖面，从而对观测系统的最大炮检距、道间距等参数进行论证的一些实用方法，这些方法对地震资料采集具有很好的指导作用；然后根据这些结果，再比较准确地进行叠前深度偏移的初始速度模型建立，从而达到了复杂地表下复杂构造精确成像的目的。     

The computer: liberator or jailor of the creative spirit

A discussion of the historical and aesthetic questions raised by the Fine Arts community regarding the uses of the computer by artists, its limitations and its potential. Creating a texture and context for this discussion necessitated the weaving into this discussion the role of technology, science, mathematics, the humanities, and aesthetics in the visual arts.     

Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

机载扫描成象系统的技术发展

叙述了机载扫描成象系统的发展,基本结构,特点及其应用.     

一种弹载条带式SAR成像方法

弹载条带式SAR信号特点表现为小的距离弯曲量,当分辨率要求不是特别高时,若最大距离弯曲量小于一个距离分辨单元时可忽略不计,而只考虑距离走动量的校正。针对这一特点提出了一种在频域对距离迁移的线性项即距离走动校正的成像方法,并提出了距离误差校正和图像几何校正相结合的方法,使得成像效率更高。仿真成像结果验证了该方法的可行性。     

Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation

Representative and quantitative microstructural information of cement-based materials can be obtained in the backscattered electron and X-ray modes of the scanning electron microscope (SEM). One prerequisite, of several, is to use flat specimens. Microstructures that are minimally affected by the grinding and polishing necessary to produce the flat surface can be obtained. It is essential to fill the pores of the specimen with epoxy resin prior to grinding and polishing. After hardening, the epoxy stabilizes the microstructure and enables it to withstand the stresses of grinding and polishing without alteration. In the present paper, we describe a preparation technique that we consider to have produced excellent polished specimens. The importance of epoxy impregnation is demonstrated.     

Optical scattering in beef steak to predict tenderness using hyperspectral imaging in the VIS-NIR region

The objective of this research is to develop a non-destructive method for predicting cooked beef tenderness using optical scattering of light on fresh beef muscle tissue. A hyperspectral imaging system (λ = 496–1,036 nm) that consists of a CCD camera and an imaging spectrograph, was used to acquire beef steak images. The hyperspectral image consisted of 120 bands with spectral intervals of 4.54 nm. Sixty-one fresh beef steaks, including 44 strip loin and 17 tenderloin cuts, were collected. After imaging, the steaks were cooked and Warner-Bratzler shear (WBS) force values were collected as tenderness references. The optical scattering profiles were derived from the hyperspectral images and fitted to the modified Lorentzian function. Parameters, such as the peak height, full scattering width at half maximum (FWHM), and the slope around the FWHM were determined at each wavelength. Stepwise regression was used to identify 7 key wavelengths and parameters. The parameters were then used to predict the WBS scores. The model was able to predict WBS scores with an R = 0.67. Optical scattering implemented with hyperspectral imaging shows limited success for predicting current status of tenderness in beef steak.