连续运转的受抑全内反射棱镜调Q机理及其应用

讨论了连续运转的受抑全内反射棱镜调Q技术的机理，指出了把它用作连续Nd:YAG激光器Q开关的优点以及必要的技术指标。     

LD泵浦Nd:YVO_4/Cr:YAG激光器的被动调Q锁模

报道了实验中发现的可饱和吸收被动调Q晶体Cr:YAG的调Q锁模现象,在插入不同透过率的Cr:YAG片以及注入不同的泵浦电流时,得到了不同的调Q锁模输出波形,并对这一现象作了初步的讨论,总结出一些规律。     

被动锁模掺镱光纤激光器中耗散孤子特性

对被动锁模光纤激光器系统谐振腔中每个器件进行建模;通过数值仿真实验研究了具有严格线性啁啾的耗散孤子在谐振腔内的演化过程;分析了腔内色散与掺镱光纤的饱和能量对耗散孤子脉宽与峰值功率特性参数的影响.仿真实验结果表明,耗散孤子的脉宽随着色散的增加而变宽,峰值功率随着色散的增加而减小.增益饱和能量对耗散孤子脉宽的影响是非单调的,在仿真实验条件下,当掺镱光纤的增益饱和能量的值为70 pJ时,脉宽达到最小值,而耗散孤子的峰值功率随着增益饱和能量的增加而增加,且变化趋势几乎是线性的.     

被动补偿脉冲发电机无槽电枢绕组瞬态电感的计算

利用分离变量法,在计及无槽电枢绕组空间几何尺寸和简化补偿筒中涡流分布的情况下,通过对气隙磁场分析,导出了被动补偿脉冲发电机无槽电枢绕组瞬态电感的解析表达式,应用此公式,对２５ＭＷ样机进行了实例计算,分析了影响电感的主要因素。     

Enhanced Q-switching performance of magnetite nanoparticle via compositional engineering with Ti3C2 MXene in the near infrared region

In this work,we reported a new strategy to improve the nonlinear saturable absorption performance of magnetite (Fe3O4) nanoparticles (FONPs) via the compositional engineering with the Ti3C2 MXene in the near-infrared (NIR) region.Based on the DFT simulation,the band structures and work function were significantly modified by the Ti3C2 MXene doping.By using the open-aperture Z-scan technology,the nonlinear optical features of the FONPs@Ti3C2 nanocomposite were significantly improved,show-ing the great potential as the saturable absorber in the pulsed laser.With the nanocomposite as the saturable absorber,the passively Q-switched Nd∶GdVO4 lasers emitted much shorter pulse durations when compared with the pristine FONP saturable absorber.These findings indicated that FONPs@Ti3C2 heterostructure was a promising saturable absorber for the short pulse generation in the NIR region.     

千赫兹电光调Q LD端面泵浦Nd:YVO紫外激光器

研究了LD端面泵浦Nd:YVO晶体的腔内三次谐波转换的全固化脉冲紫外激光器,当LD抽运功率为20 W时,355 nm平均输出功率为80 mW,脉宽为13ns,并对实验结果进行了分析和讨论.     

主动驱动/被动箝位型压电精密步进驱动器研究

提出一种基于直线动子主动驱动和定子被动箝位的新型的压电精密步进驱动器。该驱动器以仿生运动的原理，以压电陶瓷叠堆为动力源，采用双薄壁柔性铰链微变形结构，提高了该驱动器箝位的稳定性和步进旋转的稳定性。通过理论分析和实验研究，深入的揭示了该驱动器的运动特性。     

量子阱二极管泵浦的Nd:YVO4/Cr:YAG高重复率被动调Q激光器

量子阱二极管端面泵浦的Nd:YVO₄激光器中,采用Cr:YAG作为可饱和吸收体,获得了1.06μm的高重复率被动调Q脉冲激光输出.在吸收泵浦功率528.3mW时,输出脉冲能量0.19μJ,宽度32ns,脉冲重复率达158.7kHz.     

1.0μm掺钕介质全固化调Q脉冲激光技术

以量子阱激光二极管(LD)为泵浦源、三价钕离子(Nd³⁺)晶体为增益介质、发射波长在1.0μm附近的全固体脉冲激光器团结构紧凑、性能可靠,而能够在许多方面得到广泛的应用.本文介绍了近年来这种全固化调Q激光技术的发展与运用,主要有主动(电光、声光)调Q激光器、被动调Q激光器等.实验表明,将Cr⁴⁺:YAG为代表的掺四价铬离子晶体作为被动调Q元件,能够实现这一波段内高重复率和高峰值功率的脉冲运转,为全固化低成本、中小功率/能量输出的脉冲激光器指出了一条具有实际意义的道路.     

Pure antimony film as saturable absorber for Q-switched erbium-doped fiber laser

This paper reports on the use of Antimony (Sb) polymer film to generate stable Q-switching pulses in Erbium-doped fiber laser (EDFL) cavity. The SA is fabricated by coating a thin layer of Sb on a polyvinyl alcohol (PVA) film through physical vapour deposition (PVD) process. A 1 × 1 mm area of the film SA is cut and integrated into between two fiber ferrules inside the laser cavity for intra-cavity loss modulation. Self-starting and stable Q-switched pulses are obtained within a pump power range from 60 to 142 mW. Within this range, the repetition rate increases from 70.82 to 98.04 kHz, while pulse width decreases from 7.42 to 5.36 μs. The fundamental frequency signal-to-noise ratio of the pulse signal is 74 dB, which indicates the excellent stability of the pulses. The maximum output power and pulse energy are 8.45 mW and 86.19 nJ, respectively. Our demonstration shows that Sb film SA capable of generating stable pulses train operating at 1.55-micron region.