基于石墨烯可饱和吸收体的被动锁模、被动调Q掺镱光纤激光器

报道了石墨烯材料作为可饱和吸收体的被动锁模、被动调Q掺镱全光纤激光器。采用环形腔结构,在抽运功率为1.2W时,有稳定的重复频率为1.04MHz的自锁模脉冲发生,平均输出功率为46mW;当抽运功率增加到2.3W时,平均输出功率为170mW,相应的单脉冲能量高达163nJ,脉冲宽度约为680ps。采用线形腔结构,实现了石墨烯被动调Q激光脉冲输出,其重复频率在140～257kHz可调,最窄激光脉冲宽度为70ns,最大平均功率为12mW,相应最大单脉冲能量为46nJ。     

铌酸锂用于灯泵Cr-Tm:YAG激光器的调Q与调谐

为了简化激光器结构,减少腔内损耗,首次提出利用LiNbO3电光晶体较高的色散特性,实现2μm波段可调谐激光器的调Q与调谐。将LiNbO3晶体加工成单块特殊形状的棱镜,作为主动调Q器件,用于2μm波段灯泵Cr-Tm：YAG激光器,以产生巨脉冲,该棱镜还同时具有调谐的功能。将该棱镜插入室温灯泵的Cr-Tm：YAG激光器中,实现了1．95～2.08μm范围的调Q、调谐运转,重复频率为1-5Hz。实验结果表明,所提出的方法可行。     

灯泵浦Cr~(3 ):LiCaAlF晶体可调谐Q开关激光器

报道了闪光灯泵浦掺铬氟化铝钙锂（ＣｒＬｉＣＡＦ）可调谐、Ｑ开关激光器的实验结果。调谐范围为７３０～８５０ｎｍ，峰值波长为７８０ｎｍ。激光最大输出能量为１．６２Ｊ，斜率效率为０．８％，阈值为５０．４Ｊ。ＫＤ＊Ｐ晶体电光调Ｑ，单脉冲半宽度为４８ｎｓ，峰值功率为１．３×１０６Ｗ。     

5kHz电光调Q LD端面泵浦Nd∶YVO4 绿光激光器

文章介绍了连续二极管激光器（LD）端面泵浦Nd：YVO4晶体,在200-5000Hz电光调Q的情况下的激光输出特性。当二极管输入电流在25A（约10w）,电光Q开关重复率为1kHz时,532nm激光的平均输出功率为28mW,脉宽为20ns。并对实验结果进行了分析和讨论。     

LD抽运Nd:YVO4、Nd:GdVO4和Nd:YAG激光特性比较

报道了在相同实验条件下，分别用Nd：YVO4、Nd：GdVO4和Nd：YAG三种晶体作激光介质，实现了连续波和Cr^4 ：YAG被动调Q1．06μm激光输出，分析对比了三种增益介质的泵浦阈值、转换效率及脉冲宽度、重复频率和峰值功率等一系列激光特性，为在不同运转方式下选取合适的增益介质，提供了一定的实验依据。     

被动锁模光纤激光器的多模式输出

被动锁模光纤激光器腔体结构简单,可以实现全光纤集成,是产生超短脉冲的有效方法,而非线性偏振旋转又是其中最重要、最简单的被动锁模方法。为了研究基于非线性偏振旋转被动锁模光纤激光器存在的多种不同工作模式,采用实验方法,得到了包括正常孤子态,多脉冲束缚态,噪声像脉冲态等输出模式。结果表明,基于非线性偏振旋转被动锁模光纤激光器存在多种不同的工作模式。     

LiF：F_2~－色心晶体调Q和色心激光

本文报导ＬｉＦ：Ｆ２－色心晶体调ＱＮｄ：ＹＡＧ激光器中Ｆ２心激光振荡的条件、光谱成分和激光脉冲形状等参数特点。     

C+L波段掺铒光纤被动锁模激光器

提出并证明了一种宽光谱被动锁模掺铒光纤激光器,为光学频率梳和光纤飞秒脉冲的产生奠定了基础。该激光器基于非线性偏振旋转的锁模机理,同时在大的正常色散区合理地将C波段和L波段掺铒光纤结合,确保激光器具有C+L波段的增益谱覆盖。当泵浦功率为350mW时,脉冲稳定的以基频4.32MHz运转,3dB带宽为60nm,20dB覆盖了1522~1630nm,实现了增益带宽内光谱的完全覆盖。这种利用增益拼接加宽光谱的方法可以有效避免光谱成分的非线性相位噪声,并且有利于进一步压窄脉冲。     

Q-switched thulium-doped fiber laser operating at 1940 nm region using a pencil-core as saturable absorber

Q-switched thulium-doped fiber laser (TDFL) is demonstrated using pencil-core flakes as a saturable absorber (SA) for the first time. The SA was fabricated by exfoliating pencil-core flakes on adhesive tape surface, then repeatedly folded over the tape until the flakes homogenously deposited on the tape. A small piece of the tape is sandwiched between two ferrules and incorporated in TDFL cavity to realize a stable Q-switching pulse train. By increasing the 1552-nm pump power from 389 to 431 mW, the repetition rate of the TDFL increases from 14.95 to 34.60 kHz while the pulse width decreases from 6.70 to 4.69 μs. The maximum pulse energy of 46.05 nJ is generated with repetition rate and pulse width of 21.25 kHz and 6.27 μs, respectively. To the best our knowledge, this is a first demonstration SA from mundane object as alternative to commercial bulk graphite for Q-switched fiber laser.     

Diode-end-pumped passively Q-switched Nd:YAG crystal laser with V:YAG saturable absorber at 1319 and 1338 nm

A diode-end-pumped passively Q-switched Nd:YAG laser with a V:YAG saturable absorber emitting at 1319 and 1338?nm was demonstrated for the first time. A maximum output power of 286?mW was obtained with minimum pulse duration of 13.2?ns and the highest repetition rate was 15?kHz under an incident pump power of 7.7?W. The calculated highest peak power and pulse energy were 2.1?kW and 29?μJ, respectively.