Alekseevskii-Tate revisited:An extension to the modified hydrodynamic theory of long rod penetration

The modified hydrodynamic theory of long rod penetration into semi-infinite targets was established independently by Alek-seevskii and Tate over forty years ago and since then many investigators contributed much to the development of the high speed penetration mechanics.However,in all the models proposed so far,the target resistance Rt is not well defined and usually determined by adjusting it until the predicted depth of penetration comes to an agreement with experimental data.In this paper,assumptions are...     

基于解析解的四阶PDE曲面裁剪方法

该文提出了一种可以广泛应用于四阶PDE曲面的裁剪方法。利用PDE的参数域内的曲线在曲面上投影,得到所求裁剪曲面的边界曲线,然后通过边界曲线的导矢与曲面在边界曲线处的法向量得到边界曲线处的跨界导矢,最后以求得的裁剪曲面的边界曲线以及裁剪曲面在边界曲线处的跨界导矢为PDE曲面的边界条件,用四阶的PDE曲面方程求得PDE裁剪曲面。     

20CrMnTi螺旋锥齿轮中出现圆鼓泡问题的分析

在对机车转向架螺旋锥齿轮的粗、精加工中发现其表面鼓起许多小泡，将其剖开酸洗后呈现为小裂纹状，该现象在实际生产中较为罕见，对此进行分析，探讨，查找原因，确定这是钢材内气泡未能焊合的结果，为此制定了改进措施。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

基于逻辑回归模型的木片和树皮的图像识别

为了提高木片生物能的利用率,需要除去木片中的树皮杂质。识别木片和树皮的图像对于实现二者分离具有重要作用。提出一种基于逻辑回归模型来对木片和树皮进行图像识别的算法。算法流程包括计算各种可以描述木片和树皮纹理的参数,利用SAS统计分析出最佳参数,将最佳参数计算所得的样本数据用于SAS LOGISTIC过程得到预测方程,再将预测方程用于逻辑回归模型来实现木片和树皮的图像识别。通过实验可知,最佳参数为灰度方差,该图像识别算法的正确率能达到97.4%。     

Robust Kalman filtering for uncertain discrete-time systems with probabilistic parameters bounded within a polytope

We consider the problem of finite horizon discrete-time Kalman filtering for systems with parametric uncertainties. Specifically, we consider unknown but deterministic uncertainties where the uncertain parameters are assumed to lie in a convex polyhedron with uniform probability density. The condition and a procedure for the construction of a suboptimal filter that minimizes an expected error covariance over-bound are derived.     

Error compensation in machine tools: a neural network approach

For a non-idealized machine tool, each point in the workspace is associated with a tool point positioning error vector. If this error map can be determined, then it is possible to substantially improve the positioning performance of the machine by introducing suitable compensation into the control loop. This paper explores the possibility of using an artifical neural network (ANN) to compute this mapping. The training set for the ANN is obtained by mounting a physical artifact whose dimensions are precisely known in the machine's workspace. The machine, equipped with a touch trigger probe, measures the positions of features on the artifact. The difference between the machine reading and the known dimension is the machine error at that point in the workspace. Using standard modeling techniques, the kinematic error model for a CNC turning center was developed. This model was parameterized by measurement of the parametric error functions using a laser interferometer, electronic levels and a precision square. The kinematic model was then used to simulate the artifact-measuring process and develop the ANN training set. The effect of changing artifact geometry was explored and a machining operation was simulated using the ANN output to provide compensation. The results show that the ANN is capable of learning the error map of a real machine, and that ANN-based compensation can significantly reduce part-dimensional errors.     

A quantized set-membership estimation-based heading control method of unmanned surface vessels under unknown-but-bounded wave-induced disturbances

This paper is concerned with the heading tracking control problem for a network-based unmanned surface vessel (USV) under wave-induced disturbances. Considering the characteristics of the wave-induced disturbances, the unknown-but-bounded (UBB) noise model is adopted. Meanwhile, signal quantization is taken into account due to the limited capacity of the communication channel. Based on these considerations, a novel set-membership based control scheme is proposed, which consists of a set-membership filter (SMF) and a set-membership controller (SMC). In the proposed control scheme, the SMF is designed for providing an ellipsoidal estimation set for the USV at each sampling step, and then the SMC uses the estimation set for producing control input for the USV in order to track the reference. Sufficient conditions are derived for the considered USV system to be asymptotically stable and satisfy the modified set-membership performance constraint. Simulation results verifies the effectiveness of the proposed control scheme.     

从测角后交最佳点位规律看规范规定之不足

本文分析了文献[1]所总结的测角后交两类公式在取得最佳点位时的规律,指出当前规范对此问题规定之不足.