高灵敏度热释电摄象管红外电视系统

针对热释电摄象管(PEV)在传统的对称斩波模式下存在的各种问题,设计了一种新的非对称斩波模式PEV红外电视系统.通过提高PEV摄象机的温度响应率R_i和采用高去噪声信号处理系统,大大改善了PEV红外成象系统的性能.     

凝析气井井筒动态预测方法

利用垂直管流公式,结合流体相平衡热力学闪蒸计算,运用状态方程模拟,给出凝析气井井筒动态预测新方法.根据该方法.结合油藏数值模拟计算的结果,可准确地预测不同生产时期凝析气井的井筒动态.     

轴端沟槽底部激光强化工艺参数优化研究

分析了选用不同激光能量密度对HT300进行表面强化处理时，材料表面呈现的四种状况；未相变硬化、相变硬化、表面微熔与表面熔凝的金相组织。根据工艺要求，选取相变硬化方法对轴端沟槽底表面进行处理。分析了工件激光处理方法并通过试验研究，寻找轴端沟槽底部激光强化工艺参数；激光功率（P）、光斑直径（D）及扫描速度（V）的优化组合。硬度测试及耐磨性能试验表明：激光相变处理和激光熔凝处理后轴端沟槽底部表面较表面感应淬火硬度分别提高7%和34%，绝对磨损体积分别下降了13%和25%。实践证实，对轴端沟槽底部激光相变硬化处理方法较其他表面处理方法工艺简单，加工工件符合技术要求，试验结果对零件表面处理提供了可靠依据。     

一种新的基于极大似然估计的系统辨识方法

进化计算是一种基于自然选择和自然变异机制的并行随机优化算法。由于递推极大似然估计法难以实现性能指标函数的全局寻优，所以本文提出了将改进的进化计算用于系统参数辨识的方法。计算机仿真结果表明，该算法能够实现似然函数的全局寻优。     

Formation of GaAsP interface layers monitored by reflectance anisotropy spectroscopy

Reflectance anisotropy spectroscopy (RAS) has been used to study As-by-P exchange during metalorganic vapor phase epitaxy. The study focuses on the processes occurring during switching from GaAs to GaInP, especially the effect of purging PH₃ over a GaAs surface. GaAsP/GaAs superlattices of different periodicity were grown and the P-content was determined by high-resolution x-ray diffraction and correlated to the RAS spectra. From the temperature dependence of the P-content, an activation energy of 0.56 eV was estimated for the incorporation mechanism. In addition to the insights into the processes at mixed group-V heterointerfaces, our study demonstrates the reproducibility of RAS transients that thus can be used for process monitoring.     

单元系T—p相图的数学结构

作者以化学元素的稳定单质为基准,推演出了任意物质M_i(相态Ω)的热力学生成活度{相态Ω)的函数形式:?D_Ω数值的大小体现着相态Ω的热力学相对稳定性.根据集合论原理沿D(稳定性)座标取极大值的方法把物理性质互不连续的各个异相态连结在一起,建立了单元系在T-p面上的优势分布方程(PSDE):■作者以H_2O为实例,计算了T-p相图,与实验相图基本一致.     

Estimation of Thermodynamic Properties from Binary Phase Diagram

The general relationship between binary phase diagrams and the thermodynamic properties was system-atically derived without any assumption.A procedure was presented to estimate the thermodynamic proper-ties from the binary phase diagrams.     

Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

窄带中频数字接收机高速信号处理技术

窄带中频数字接收机在雷达对抗侦察中得到了广泛应用，其高速信号处理技术是目前研究的重点。本文详细介绍了数字雷达告警接收机高速信号处理技术的发展现状和关键技术，最后通过对该技术的全面分析指出了值得深入研究的领域。