横向各向同性介质中的初至波旅行时计算

本文直接采用Thomsen导出的横向各向同性介质中的相速度、群角与相角、群速度与相速度的精确函数关系,提出了一种新的具有任意各向异性强度的横向各向同性介质中的初至波旅行时计算方法,它不同于Faria等人给出的采用群速度近似公式(Byun)的仅适应弱各向异性的初至波旅行时计算方法。该新算法在计算具有任意各向异性强度的横向各向同性介质中的初至波旅行时时,并不显著地增大计算时间。分析对比由新算法得到的初至波旅行时的等值线图和由交错网格有限差分波场模拟得到的波场快照表明,无论是对弱各向异性还是对强弱各向异性,新算法都具有较高的精度;随着各向异性强度的增大,新算法的计算结果与采用近似公式计算结果的差值也随之增大。     

TFM调制及其改进技术的研究

通过对TFM调制技术的研究,修正了其中预调制滤波器冲击响应波形g(f)在时间轴上的位置及其频谱G(w)的表达式.然后将TFM基带信号进行近似,即对TFM的相位路径进行进一步的控制,得到一个改进的TFM调制技术.改进后的TFM调制技术和原TFM调制技术相比,频带压缩能力提高了一倍,误码性能不变,但会出现3 dB的寄生调幅,需要提高发射机的发射功率.     

信道粒度可变的分块自适应OFDM传输系统

满足不同服务质量(QoS)业务是Beyond 3G系统必须考虑的一个问题。本文提出一种可变信道粒度的分块自适应OFDM系统。系统能够根据不同用户多样化的速率需求，自适应地改变分块的大小，并且在每个分块上进行自适应调制，在满足用户速率要求的基础上降低了对子载波分配信息(SAI)和自适应调制信息(AMI)的需求。仿真结果表明，本文提出的系统在系统容量和频谱效率上比固定分块自适应OFDM系统有更好的性能。     

Full Complex Amplitude Digital Holograms： Design, Fabrication and Optical Characterization

Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element‘s optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.     

On strategies for enforcing interfacial constraints and evaluating jump conditions with the extended finite element method

We consider a problem stemming from recent models of phase transitions in stimulus‐responsive hydrogels, wherein a sharp interface separates swelled and collapsed phases. Extended finite element methods that approximate the local solution with an enriched basis such that the mesh need not explicitly ‘fit’ the interface geometry are emphasized. Attention is focused on the weak enforcement of the normal configurational force balance and various options for evaluating the jump in the normal component of the solute flux at the interface. We show that as the reciprocal interfacial mobility vanishes, it plays the role of a penalty parameter enforcing a pure Dirichlet constraint, eventually triggering oscillations in the interfacial velocity. We also examine alternative formulations employing a Lagrange multiplier to enforce this constraint. It is shown that the most convenient choice of basis for the Lagrange multiplier results in oscillations in the multiplier field and a decrease in accuracy and rate of convergence in local error norms, suggesting a lack of stability in the discrete formulation. Under such conditions, neither the direct evaluation of the gradient of the approximation at the phase interface nor the interpretation of the Lagrange multiplier field provide a robust means to obtain the jump in the normal component of solute flux. Fortunately, the adaptation and use of local, domain‐integral methodologies considerably improves the flux evaluations. Several example problems are presented to compare and contrast the various techniques and methods. Copyright © 2004 John Wiley & Sons, Ltd.     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

A three‐dimensional model describing stress‐temperature induced solid phase transformations: solution algorithm and boundary value problems

An always increasing knowledge on material properties as well as a progressively more sophisticated production technology make shape memory alloys (SMA) extremely interesting for the industrial world. At the same time, SMA devices are typically characterized by complex multi‐axial stress states as well as non‐homogeneous and non‐isothermal conditions both in space and time. This aspect suggests the finite element method as a useful tool to help and improve application design and realization. With this aim, we focus on a three‐dimensional macroscopic thermo‐mechanical model able to reproduce the most significant SMA features (Int. J. Numer. Methods Eng. 2002; 55 : 1255–1264), proposing a simple modification of such a model. However, the suggested modification allows the development of a time‐discrete solution algorithm, which is more effective and robust than the one previously discussed in the literature. We verify the computational tool ability to simulate realistic mechanical boundary value problems with prescribed temperature dependence, studying three SMA applications: a spring actuator, a self‐expanding stent, a coupling device for vacuum tightness. The effectiveness of the model to solve thermo‐mechanical coupled problems will be discussed in a forthcoming work. Copyright © 2004 John Wiley & Sons, Ltd.     

Al-Zn-Ce非晶合金的相选择与组织结构演化

本文研究了具有典型分解特征的Al-Zn-Ce非晶合金的形成和晶化过程，探讨了各种相的生成顺序。XRD和DSC测试结果表明强烈的化合物短程序有利于Al-Zn-Ce非晶合金的形成。在Al-Zn-Ce非晶合金的晶化过程中存在复杂的相选择行为，多种相的竞争形核和有限生长使其具有复杂的结构特点。同时，结果也表明冷速对该体系非晶的形成有很大影响。     

钻井液固相化学清洁剂ZSC-201的合成及性能

介绍了钻井液用固相化学清洁剂ZSC－201的室内合成及性能评价，结果表明，固相化学清洁剂ZSC－201具有较强的抑制性，可有效抑制粘土水化分散，保证钻井液清洁，在钻井液体系中与阴、阳离子型钻井液处理剂配伍性好，同时具有较好的抑制增效作用，在有效的加量内对钻井液滤矢量和流变性等影响小，固相化学清洁剂ZSC－201已在中原油田近30口井中应用，具有良好的推广应用前景。     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。