布喇格光纤光栅反射特性及制作的理论研究

在对光纤光栅折射率分布进行合理假设的基础上,运用耦合模理论计算了光纤光栅的反射特性,对其反射特性与相关参数的关系进行了分析,并且还推导出了用相位掩模法制造光纤光栅的理论根据,得到了一些有益于光纤光栅制造的结论和有用公式。     

补偿式光纤F—P干涉仪的信号处理系统

本文提出并研制成补偿式光纤F-P干涉仪信号处理系统,提出了用来测量微小位移信号的三种方法及电路,即透射峰时间间隔测量法、光脉冲基波幅度测量法(精密整流法)、鉴相法。测试结果表明:时间间隔测量法,它的最大灵敏度达到0.26纳米/微秒;精密整流法,最大灵敏度为2.38纳米/伏特。     

智能同步广播激励器及其标频

使用智能同步广播激励器,并采用CCTV传输的1MHz标频信号,就有可能实现自适应相位跟踪同步广播。这将大大节省中波段的频率资源。     

Synthesis of Iron-Based Laves Phase Containing Praseodymium Magnetostrictive Materials

The synthesis and magnetostriction of PrxTb1-x.Fe2, PrxTb1-x Fe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys were investigated in this study. The addition of boron or cobalt atom in PrxTb1-xFe2 could effectively prevent the formation of non-cubic phases, and Pr concentration limit was successfully increased from 0.2 to 0.4. X-ray step scanning for the PrxTb1-xFe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys showed that PrFe2 possessed a large spontaneous magnetostriction λ1111.     

含RE铝阳极中析出相的电化学行为研究

用电子探针和能谱分析技术，观察了Al-5Zn-0．05In-0．1Sn-1Mg-0．3RE阳极中主要析出相的成分，并熔炼了析出相合金．电位测量和腐蚀后铝阳极表面的电子探针面扫描分析表明：富Sn相为阳极相，富Fe相、富RE相为阴极相；Fe相是铝阳极自腐蚀微电池中的主要阴极相，温度对析出相的电化学行为有影响．     

Crystallographic orientation dependence of the growth rate for GaAs low pressure organometallic vapor phase epitaxy

The complete crystallographic orientation dependence of the growth rate for GaAs low pressure organometallic vapor phase epitaxy (LPOMVPE) is determined using a previously described semi-empirical model. A set of LPOMVPE growth rate polar diagrams is presented for reactor temperatures near 550°C as well as near 700°C. Also, the variation of the growth rate polar diagrams as a function of process variables is given. The experimental data utilized in the semiempirical model was attained using a typical horizontal reactor LPOMVPE system and typical LPOMVPE process parameters.     

一种新的抖动调制方法

本文在脉冲延迟发生的基础上提供了一种用调相方法实现抖动调制的方案。该采用数字电路，与传统的调频方法比较具有易实现，精度高等优点，并为进一步开发出抖动测试集资打下了基础。     

提高16Mn连铸坯控轧合格率

１６Ｍｎ连涛坯进行控轧时，按铸坯碳当量的上限和下限，分别采用两种不同的控轧制度。在邯钢中板分厂试轧的结果，轧材合格率均达到９６％以上，投产后轧材合格率达到９８％以上。     

Phase-change thermal energy storage using spherical capsules: performance of a test plant

The aim of this paper is the study of an industrial process of energy storage usable for air conditioning or refrigeration, investigating a test plant which is a tank with a reduced size, filled with randomly dispersed commercial nodules, placed in a refrigeration loop. The nodules are spherical capsules in which phase change materials (PCM) are encapsulated. This test plant permits the study at length of the behaviour of the tank with, in particular, the charge mode taking into account the undercooling and the discharge mode. A simulation program that considers aspects of both the surrounding heat transfer fluid and the phase-change material packed inside the nodules is developed here in the cases of the charge and the discharge processes. The simulation results are then compared with experimental observations.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.