石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

Evaluation of contrast metrics for liquid‐crystal displays under different viewing conditions

Abstract— A psychophysical experiment was carried out to assess the perceptual contrast on a large‐sized liquid‐crystal display (LCD) under nine phases of viewing conditions. Based on the results, six contrast models employing different color attributes or the index of just‐noticeable difference (JND) were developed. Their performances were also tested by the visual data of the nine phases, which indicated that the model C_Q employing CIECAM02 brightness gives the best performance in predicting visual data under different viewing conditions among those models. A preprocessing step was also proposed to utilize the contrast model C_Q conveniently in the practical contrast evaluation of LCDs.     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.     

Fabrication of High Performance PET/TLCP Fibers through the Synergistic Interfacial Enhancement and Compatibilization of Functional 1D and 2D Carbon Nanomaterials

The maleic anhydride functionalized graphene oxide (GO-MA) is fabricated by an efficient and solvent-free Diels–Alder reaction. Polyethylene terephthalate (PET)/thermotropic liquid crystal polyester (TLCP), PET/TLCP/GO-MA, PET/TLCP/aminated multi-walled carbon nanotubes (MWCNTs-NH₂), and PET/TLCP/GO-MA/MWCNTs-NH₂ composite fibers are systematically melt-spun. The structure and compatibilizing effects of GO-MA and MWCNTs-NH₂ on the mechanical, thermal, and crystallization properties of the composite fibers are indicated. The non-isothermal crystallization kinetics and X-ray diffraction (XRD) data show that TLCP and nanofillers can change the crystalline morphology of PET. The mechanical properties of the fibers rise with increasing TLCP content. The tensile strength 929 MPa and modulus 17.5 GPa of the fibers with 7 wt% TLCP and 0.25 wt% nanofillers (0.1 wt% GO-MA and 0.15 wt% MWCNTs-NH₂) are significantly higher than those with 7 wt% TLCP (tensile strength 622 MPa and modulus 16.1 GPa) and even higher than those with 15% TLCP (tensile strength 836 MPa, and modulus 18.0 GPa). When the GO-MA and MWCNTs-NH₂ co-exist, the anti-dripping phenomenon is improved. Therefore, the TLCP, GO, and MWCNTs synergistically strengthens the mechanical properties. This is promising for the industrial fabrication of high-strength fibers.     

Structural Basis for The Recognition of Deaminated Nucleobases by An Archaeal DNA Polymerase

With increasing temperature, nucleobases in DNA become increasingly damaged by hydrolysis of exocyclic amines. The most prominent damage includes the conversion of cytosine to uracil and adenine to hypoxanthine. These damages are mutagenic and put the integrity of the genome at risk if not repaired appropriately. Several archaea live at elevated temperatures and thus, are exposed to a higher risk of deamination. Earlier studies have shown that DNA polymerases of archaea have the property of sensing deaminated nucleobases in the DNA template and thereby stalling the DNA synthesis during DNA replication providing another layer of DNA damage recognition and repair. However, the structural basis of uracil and hypoxanthine sensing by archaeal B-family DNA polymerases is sparse. Here we report on three new crystal structures of the archaeal B-family DNA polymerase from Thermococcus kodakarensis (KOD) DNA polymerase in complex with primer and template strands that have extended single stranded DNA template 5’-overhangs. These overhangs contain either the canonical nucleobases as well as uracil or hypoxanthine, respectively, and provide unprecedented structural insights into their recognition by archaeal B-family DNA polymerases.