Improved Matrix-Filler Adhesion

Enhanced matrix-filler adhesion is realized after filler treatment with a surface treatment process. The hydrosol/coupling agent treatment was applied to a wide range of inorganic and organic fillers, and adhesion to a variety of matrix resins was improved. Scanning Electron Microscopy (SEM) was used to determine the locus of failure in the filled systems. The locus of failure shows the relative degree of adhesion between the filler and the polymer matrix. Significant improvement in adhesion in humid environments is also observed.     

Capture of Airborne Particulate Using Surface Applied Emulsions: Potential for Postdetonation Dirty Bomb Cleanup

Recent research has proposed the use of asphalt and tall-oil-pitch emulsions for stabilizing radioactive contamination deposited on surfaces in urban areas. The objective of this project was to investigate whether surface applied emulsions could capture airborne radioactive particulate. Laboratory experiments included wind-blown particulate capture studies using an acrylic column and particulate retainment experiments using a wind box capable of producing wind speeds of 96?km/h. A probe methodology was developed to relate particulate retainment to a tack force on the emulsion surface. Experiments were also performed to determine the potential for such emulsions to absorb particulate matter into their emulsion matrix. Tall-oil-pitch emulsions outperformed asphalt emulsions in terms of particulate retention, tack force, and the ability to absorb magnesium silicate. Both tall-oil-pitch and asphalt emulsions were capable of extracting 22–24?g?m?2 of powder from particulate-laden airflow. Tall-oil-pitch emulsions were capable of retaining as much as 5–10% of magnesium silicate powder applied (i.e., retainment densities of 10–20?g?m?2) even after seven?days of curing and after applying 96.5?km/h (60?mph) wind. Tall-oil-pitch emulsions were able to absorb surface-applied magnesium silicate (approximately 0.1–0.2?g of magnesium silicate per 1.0?g of emulsion within three?days) into their emulsion matrix, preventing the magnesium silicate from being exposed to the external environment. Initial results with these five different emulsion formulations suggested particulate capture was feasible. Future emulsion formulations (i.e., longer curing times with greater acid concentrations) should be tested to optimize this postdetonation response strategy.     

Two-Dimensional Physical and Numerical Modeling of a Pile-Supported Earth Platform over Soft Soil

This paper focuses on the mechanisms occurring in a granular earth platform over soft ground improved by rigid piles. Two-dimensional physical model experiments were performed using the Schneebeli’s analogical soil to investigate the load transfer mechanisms by arching and the settlement reduction and homogenization. Experimental outputs are compared to results obtained on a numerical model using a plane strain continuum approach. The impact of the constitutive model complexity to simulate the platform material behavior was first assessed, but no large difference was recorded. As far as the proposed model, which takes the main features of the observed behavior satisfactorily into account, the numerical procedure could be validated and the parametric studies extended numerically. Both approaches of this study underlined the main geometrical and geotechnical parameters which should inevitably be taken into account in a simplified design method, namely the capping ratio, the platform height, and the platform material shear strength.     

Effect of Rare Earth Element Cerium on Mechanical Properties and Morphology of TiN Coating Prepared by Arc Ion Plating

TiN coatings were deposited on polished substrates of W18Cr4V high speed steel by means of vacuum arc ion plating. The effect of cerium on adhesion between TiN coating and substrate was studied. The microstructures and composition of TiN coatings were also investigated by means of scanning electron microscope (SEM), Auger electron spectroscopy (AES), and X-ray diffraction (XRD) technique. It was found that cerium is an effective modifying agent and the addition of suitable amount of cerium to TiN coatings can produce relatively excellent properties such as micro-hardness, wear resistance, oxidation resistance and porosity. The experimental results show that the added cerium in TiN coatings makesa contribution to form the preferred direction along with a (111 ) or (222) close packed face, which may be one of the reasons that improves some properties mentioned above.     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

一种低耐压器件实现的压电陶瓷驱动电源

介绍采用普通低耐压器件三端可调集成稳压块实现的３００Ｖ输出的压电陶瓷驱动电源的设计思想，电路原理，设计计算及安装调试等内容，该设计的特点是电路简单，可靠性好，经济实用。     

Structural properties of inorganic materials: tungsten bronze SBN ceramics

Rare-earth doped strontium barium niobates were synthesized using usual ceramic technique. The dopants are La, Ce, Gd, Sm and Nd. The materials were characterized by XRD and density measurements. The grain sizes were determined from SEM analysis. Lattice parameters changed uniformly with rare-earth dopants in unfilled structures. Density measurements and SEM analysis confirmed only minute changes in the densities of the ceramics.     

Equipment for Testing Sheet Structural Materials under Biaxial Tension. Part 2. Testing by Biaxial Loading in the Plane of the Sheet

We analyze specific features of the design of equipment used for mechanical testing of sheet structural materials under the conditions of biaxial static, cyclic, or dynamic loading. We propose original solutions of the problems related to the fatigue testing of crosslike specimens performed without using complex hydraulic systems and their dynamic testing carried out by using very simple testing machines for uniaxial tension–compression.