Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

有机颜料在塑料着色中几个指标初探

本文提出了有机颜料在塑料着色中的几个主要指标，分别探讨了这些指标的表征和测试方法，在试验的基础上，对比了国产塑料（杭州百合化工有限公司）与进口颜料的性能与水平。     

现代汽车非金属部件的修补涂装

介绍了汽车塑料件的识别、预处理和修补涂装。     

Mechanical properties of composites from sawdust and recycled plastics

Mechanical properties of wood plastic composites (WPCs) manufactured from sawdust and virgin and/or recycled plastics, namely high density polyethylene (HDPE) and polypropylene (PP), were studied. Sawdust was prepared from beech industrial sawdust by screening to the desired particle size and was mixed with different virgin or recycled plastics at 50% by weight fiber loading. The mixed materials were then compression molded into panels. Flexural and tensile properties and impact strength of the manufactured WPCs were determined according to the relevant standard specifications. Although composites containing PP (virgin and recycled) exhibited higher stiffness and strength than those made from HDPE (virgin and recycled), they had lower unnotched impact strengths. Mechanical properties of specimens containing recycled plastics (HDPE and PP) were statistically similar and comparable to those of composites made from virgin plastics. This was considered as a possibility to expand the use of recycled plastics in the manufacture of WPCs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3641–3645, 2006     

H.264/SVC mode decision based on mode correlation and desired mode list

Design of video encoders involves implementation of fast mode decision (FMD) algorithm to reduce computation complexity while maintaining the performance of the coding. Although H.264/scalable video coding (SVC) achieves high scalability and coding efficiency, it also has high complexity in implementing its exhaustive computation. In this paper, a novel algorithm is proposed to reduce the redundant candidate modes by making use of the correlation among layers. A desired mode list is created based on the probability to be the best mode for each block in base layer and a candidate mode selection in the enhancement layer by the correlations of modes among reference frame and current frame. Our algorithm is implemented in joint scalable video model (JSVM) 9.19.15 reference software and the performance is evaluated based on the average encoding time, peak signal to noise ration (PSNR) and bit rate. The experimental results show 41.89% improvement in encoding time with minimal loss of 0.02 dB in PSNR and 0.05% increase in bit rate.     

Evaluation of Polyester Resin as a New Compatibilizer for SBR/PVC Blends

A polyester (PE) based on the glycolyzed products of PET was prepared and added in different concentrations to a series of SBR/PVC blends. The addition of the polyester showed that all properties of SBR/PVC blends were improved by incorporation of PE. Highest mechanical strength values were obtained at a polyester concentration of 7.5 phr. Thermal analysis as well as dynamic mechanical properties of SBR/PVC blends after the addition of 7.5 and 10 phr polyester indicated one single glass transition temperature. The dielectric losses (?") were analyzed in the frequency domains in the two terms of Fröhlich related to the Maxwell Wagner effect and the orientation of the aggregates caused by the movement of the main chain. The permittivity (?') values were found to increase by increasing the polyester content. This increase was followed by a decrease in the ?" up to a 7.5 phr polyester content after which no pronounced change was noticed.     

精密注塑件的生产稳定性探讨

针对精密注塑件的生产,介绍了设计,成型精密注塑件的基本要求,探讨了原材料,注塑机,电压,环境温湿度及模具积垢等因素对生产精密注塑件稳定性的影响,研究了评估工艺参数敏感性的试验方法和获得稳定工艺的手段;说明了统计过程控制（SPC）的基本原理,以及如何利用控制图和工序能力指数CP,CPK来评估,预测工序能力,确保工序确定性。     

基于MPUI模型的JPEG2000图像最大隐写容量

隐写容量是信息隐藏的4项性能指标之一,目前,相关科研工作者对其他3项指标,即鲁棒性、透明性和计算复杂性进行过大量的研究,但隐写容量方面的研究却很少.该研究有力地完善了信息隐藏的理论体系,根据JPEG2000压缩标准以及人眼对小波系数改变的敏感程度,借助小波系数的失真代价函数,区分出小波系数的承载秘密信息能力：失真代价函数值越小,该小波系数承载能力就越强;反之,该小波系数承载能力就越弱.当失真代价函数值大于1时,该系数不具有承载信息的能力,即为湿系数.通过最大隐写容量估算实验以及位满嵌入、过位嵌入和湿嵌入等评估实验,验证了所提方法的有效性.     

塑料的生命周期评价（LCA）

塑料的回收利用是近些年来再生资源研究的一个非常重要的方向。废旧塑料,尤其是消费后的废旧塑料是回收利用的重点。本文从回收方法和途径阐述了有关废旧塑料各类最新的塑料循环周期模型,进而说明积极的研究废旧塑料循环利用的新方法、新工艺具有十分重要的意义。     

浅论塑料门窗行业存在的问题及解决办法

主要介绍塑钢门窗在中国的发展历史及在发展过程中存在的主要问题，分析了产生问题的原因，并从宏观角度提出了解决办法。