纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

溶胶-凝胶法制备纳米氧化锡及其性能表征

以SnCl4·5H2O为原料,采用溶胶-凝胶法制备了纳米SnO2粒子,研究了焙烧温度、碱的种类及反应物浓度对纳米SnO2粒子大小和分散状态的影响。采用XRD、TEM、ED等技术对SnO2纳米粒子的性能进行了表征。实验结果表明:用氨水和尿素作为沉淀剂,控制反应结束时pH值为7,在600℃焙烧,制备得到粒子尺寸约为15nm、分散性良好的纳米SnO2粒子。     

Anion Sensing Porphyrin Functionalized Nanoparticles

Disulfide and dithiocarbamate functionalized porphyrins have been synthesized and used as protecting ligands for gold nanoparticle formation either via ligand substitution reactions or by direct synthesis. These nanoparticles have been shown to recognize anions via changes in the absorbance spectrum of the surface adsorbed porphyrin moieties. Association constants, derived from quantitative titrations, indicate a remarkable surface enhancement effect where the surface bound porphyrins bind anions much more strongly than the free receptor in solution.     

Effect of composition on gelation kinetics of unfilled and nanoapatite-filled poly(lactide-ethylene oxide-fumarate) hydrogels

Oscillatory shear rheometry at small strains was used to investigate the effects of composition (concentration of macromer, crosslinker, initiator/accelerator, and filler) on the gel point and ultimate storage modulus of poly(l-lactide-co-ethylene oxide-co-fumarate) (PLEOF) hydrogels. PLEOF in situ polymerizing hydrogels can be used as biodegradable scaffolds for cell encapsulation and tissue regeneration. The time evolution of the viscoelastic properties of the polymerizing mixture during the sol-gel transition was monitored using mechanical rheometry. According to the results, while the ultimate storage modulus linearly increased with the concentration of methylene bisacrylamide (BISAM) crosslinker, the values of the storage and loss moduli at the gel point were insensitive to the concentration of BISAM. Similar behavior was observed for PLEOF hydrogels reinforced with hydroxyapatite nanoparticles.     

Platinum promoted zirconia-sulfate catalysts: one-pot preparation,physical properties and catalytic activity

A new innovative methodology for the single-stage preparation of ZrO₂-SO₄ and Pt/ZrO₂-SO₄ catalysts is reported, based on the sol-gel technique. Catalysts are characterized by analysis, XRPD, BET and IR methods and are tested in the isomerization of butane.     

Oxidation of methane over platinum in a solid proton-conducting electrolyte cell

Studies of the complete oxidation of methane on a Pt electrode-catalyst in the cell with a solid proton-conducting electrolyte (CH₄ + O₂, Pt ¦ SrCe_0.92Dy_0.08O₃ ¦ Pt, H₂O + N₂) were carried out. The non-Faradaic effect of electrochemical hydrogen pumping on the rate of methane oxidation has been demonstrated. The induced change in the reaction rate at anodic polarization of a Pt electrode-catalyst was over two orders of magnitude higher than the rate of hydrogen pumping from the reaction zone through the electrolyte.     

The applicability of the ITS-90 method to platinum resistance thermometers of different purity

The static characteristics of platinum resistance thermometers with different platinum purities were measured. It is shown that in the 0–420°C range the ITS-90 method gives an error of less than 0.01°C, while in the 0–230°C range the error is less than 0.006°C. __________ Translated from Izmeritel’naya Tekhnika, No. 12, pp. 33–36, December, 2006.     

Changes in seebeck coefficient of Pt and Pt 10% Rh after use to 1700°C in High-purity polycrystalline alumina

A technique is presented that enables the effects of temperature on the Seebeck coefficient to be assessed for individual wires. The technique, involving a high-resolution thermoelectric scanning rig and a nonuniform conditioning furnace of known temperature profile, was applied to 0.5-mm-diameter wires of Pt and Pt 10% Rh. Changes were observed in Seebeck coefficient when these wires were used in high-purity twin-bore insulation for up to 200 h at temperatures over the range 500 to 1700°C. Contamination from the insulation was found to be transmitted by a vaporization process, having an activation energy of 3 eV. This caused changes of up to 0.14 V · °C^–1 in Pt and 0.01 V · °C^–1 in Pt 10% Rh. Rhodium transfer to the pure Pt wire changed its Seebeck coefficient by up to 5 V · °C^–1. The consequences of both processes for thermocouple pyrometry are presented.     

Effect of Aminated Chitosan-Coated Fe3O4 Nanoparticles with Applicational Potential in Nanomedicine on DPPG,DSPC, and POPC Langmuir Monolayers as Cell Membrane Models

An adsorption process of magnetite nanoparticles functionalized with aminated chitosan (Fe₃O₄-AChit) showing application potential in nanomedicine into cell membrane models was studied. The cell membrane models were formed using a Langmuir technique from three selected phospholipids with different polar head-groups as well as length and carbon saturation of alkyl chains. The research presented in this work reveals the existence of membrane model composition-dependent regulation of phospholipid-nanoparticle interactions. The influence of the positively charged Fe₃O₄-AChit nanoparticles on a Langmuir film stability, phase state, and textures is much greater in the case of these formed by negatively charged 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) than those created by zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC). The adsorption kinetics recorded during penetration experiments show that this effect is caused by the strongest adsorption of the investigated nanoparticles into the DPPG monolayer driven very likely by the electrostatic attraction. The differences in the adsorption strength of the Fe₃O₄-AChit nanoparticles into the Langmuir films formed by the phosphatidylcholines were also observed. The nanoparticles adsorbed more easily into more loosely packed POPC monolayer.