电子商务模式的多维分类体系研究

电子商务模式的开展是实现电子商务应用的重要问题之一.为充分探讨电子商务模式的体系建立,在总结已有成果基础上,本文基于电子商务模式的分类讨论十大类基本的电子商务模式,分析构建多维电子商务模式分类体系.     

脉冲放电高能转化制备纳米粉体

综合介绍了脉冲电流通过细金属丝放电(pulsed wire discharge,PWD)制备纳米粉体的方法.讨论了影响纳米粉体,特别是晶粒尺寸的因素,以防止形成亚微米颗粒.因为达到电压峰值的丝的沉积能相当于丝的汽化能,因此,能夠计算出沉积能.随着所施加的能量增加,气体压力降低,介质气体的热扩散率增大,晶粒尺寸变小.在惰性气氛中,采用PWD工艺,由金属蒸气急冷可制备金属粉体.如果介质气体变为氧气或者氨气,就能制备氧化物、氮化物纳米粒子.要制备双金属合金、双氧化物或氮化物纳米粒子就必需采用双金属丝和不同的介质气体.采用PWD工艺,在有机气体或烟气中,能制备电磁屏蔽和导电浆料和其它用途的钝化纳米粒子.采用丝输送器而实现大量生产纳米粉体的PWD工艺一个实例证明了PWD工艺生产纳米粉体的可行性.     

添加剂对镀锡引线可焊性的影响

分析了镀暗锡和光亮镀锡引线的可焊性，讨论了添加剂对镀锡引线可焊性的影响，适量的添加剂能提高引线的平整性和可焊性，获得了具有良好可焊性所需的最佳添加剂的加入量。     

电力绝缘用六氟化硫替代物的过去、现在和未来

本文综述了电力绝缘用SF6替代物的开发方法、发展现状和未来趋势。其开发方法包括替代物的设计与确认（物性、安全性评价、环境影响的评价等）、合成、产业化等内容。目前，开发出的SF6替代物包括SF6混合气体、饱和卤代烃、氢氟烯烃、全氟酮和全氟腈，其中七氟异丁腈的绝缘性能优异，是SF6最佳的替代物。同时文中综述了现有七氟异丁腈的合成路线，其中以碳酰氟和六氟丙烯为起始原料催化反应合成七氟异丁腈的路线，具有高效、绿色、环保的优点。以过去发展历程和现在发现现状为基础，展望了SF6替代物的未来发展趋势，提出今后的研究重点在于全面开发七氟异丁腈的应用配套设备，下一代SF6替代物及其绿色、高效的产业化路线。     

可编程控制器和变频器在倒棱机中的应用

介绍可编程控制器、直流调速系统、变频器、电子凸轮开关在倒棱机中的应用。为使设备运行最佳化，对可编程控制器的程序、辊道的变频调速等进行技术改造，使设备性能大为改善，系统的稳定性显著提高。     

Glass Furnace Boost Technology-Series/Parallel Switch

In the paper, the characters and fields were introduced for utilizing the Series/Parallel Switch (SPS). The circuit principle of the SPS technology was analyzed in detailed, explained and illuminated. We understood clearly the difference between SPS and single-phase transformator by the figure and table. Finally, it summarized that the main characters of SPS.     

Experiments of a prototype wind-driven reverse osmosis desalination system with feedback control

A prototype wind-powered reverse osmosis desalination system was constructed and tested on Coconut Island off the northern coast of Oahu, Hawaii, for brackish water desalination. The system has four major subsystems: a multi-vaned windmill/pump, a flow/pressure stabilizer, a reverse osmosis module, and a control mechanism. The feedback control mechanism, developed by this study, allowed this prototype system to be operated satisfactorily under mild ambient wind of 5 m/s or less. No auxiliary power source was needed. The system operational data showed that at an average wind speed of 5 m/s, brackish feedwater at a total dissolved solids concentration of 3000 mg/1 and at a flow rate of 13 1/min could be processed by this system. The average rejection rate of this prototype system was 97% and the average recovery ratio was 20%. The energy efficiency of the system was measured at 3 5%, which is comparable to the typical energy efficiency of well-operated multi-vaned windmills. Generally, the system's energy efficiency decreases as wind speed increases.     

Flow characteristics of hyperboloid stirrers

The flows in a fully-baffled vessel with a diameter T = 144 mm driven by hyperboloid stirrers of diameters D = 773 and 27/3 have been visualised and characterised by local measurements of velocity and turbulence and by power number. The results were obtained for a range of rotational speeds from 6 to 40 rev/s. The visualisation showed that the larger stirrer gave rise to a radial jet and that the smaller stirrer formed a jet inclined towards the base of the vessel so that there was a tendency for the system of two vortices, one above and one below the jet, to give way to a single vortex as the clearance between the stirrer and the base of the vessel was reduced. The velocity measurements revealed bulk-flow values an order of magnitude less than that of the maximum radial velocity in the jet, that the maximum radial velocity was 24% of the circumferential velocity of the tip of the stirrer, and that the radial velocities were proportional to the rotational speed. The flows generated by the hyperboloid stirrer were less vigorous than those of Rushton impellers of similar radius and were associated with power numbers 28 times less. The power number did not vary with rotational speed or with clearance within the measured range. The contrast with propeller and disc stirrers is less pronounced, but the hyperbolic profile is likely to find application and the present results provide a basis for choice.     

电力设备状态检修现状及其对策

电力设备是电网的主要构成部分,设备检修和运行管理是电网安全运行的基础。针对合肥供电公司电力设备的检修现状,本文提出了对策,总结提出了一整套电力设备管理状态检修的流程,提高了电网安全运行的可靠性。     

火电厂运行生产准备人员培训思路探讨

火电厂生产准备期间的技术要求和各阶段的工作目标是环环相扣的,因此,生产准备人员的培训工作应紧密追踪工程进度,做到"以责任制落实来保证培训工作的到位,以考核机制来强化培训工作的完成"。