面向网络化定制的产品族复合建模技术

在分析了网络化定制关键技术的基础上，针对性地对信息映射方法和产品族建进行了研究。提出了多层结构信息映射模型，以及综合类元件和参数化特征建模的双层复合产品族模型。结合本方法和以往网络化制造领域中所取得的成果，实现了较完整的基于Web的个性化定制过程。     

提高磷酸二铵产品质量方法浅析

针对磷酸二铵(DAP)产品养分波动大、含水量偏高、易结块、颜色变化大等缺点,在生产过程中采取了相应的解决措施,如配矿、联产、设备改造、工艺指标调整等,使DAP装置不仅保持了原有的优点,而且产品质量问题也得到了有效解决。养分基本保持在64.0%~64.6%,水分下降到2.1%~2.2%,结块现象较少,颜色也比较统一。     

2002年中国汽车工业动态

本简要描述了中国汽车工业的发展过程及发展前景、产品结构变化、产销量以及中国汽车生产企业状况等。     

以淀粉为原料的化工制品

综述了以淀粉为原料而得到的多种化学品的性质和应用。淀粉来自可更新资源，具有良好的可获得性，而且价格低廉，因此某些以淀粉为原料所得到的化学品与来自其他资源的化学品(例如石油化学品等)相比，具有较多的优越性。重点介绍的这类化学品有：表面活性剂、超强吸水剂、可生物降解塑料、絮凝剂和粘结剂等。     

仿人智能橡胶制品的精密硫化控制

分析了橡胶制品硫化成型的对象特性，选择了硫化成型过程控制策略，研究了控制算法及其工程应用。研究结果表明，选择仿人智能控制作为硫化成型过程的控制策略时，可实现速度快、精度高的控制，且具有极强的鲁棒性。     

打火机专用SAN树脂工业化开发生产

介绍了15kt/a本体苯乙烯－丙烯腈（SAN)装置试生产打火机专用SAN树脂的生产情况，确定了主要工艺配方及参数：进料组成为乙苯浓度为6％－11％、丙烯腈浓度为30％－42％，聚合温度130－145℃、压力0．40－0．46MPa，搅拌转速60－90r/min，脱挥温度215－250℃、压力小于等于4kPa；并对影响打火机志用SAN树脂性能的主要工艺条件及因素进行了讨论。结果表明，聚合温度、结合丙烯腈含量、熔体流动指数、转化率是影响打火机专用SAN树脂生产工艺及产品性能的主要因素。     

旁氏,夏天里的女人故事

美白产品始终是夏季护肤品市场竞争的焦点，旁氏推出“日夜美白不停顿”的新概念以应对传统美白产品的挑战，并利用策略发展和广告创意的源动力——“消费者洞察力”概念推出了一套精准的传播策略和创意出色的广告，对消费者产生了很强的吸引力。     

Output controllability and optimal output control of state-dependent switched Boolean control networks

In the present paper, we investigate the output-controllability and optimal output control problems of a state-dependent switched Boolean control network. By using the semi-tensor product, the algebraic form of the system is obtained. Then, output-controllability problems of the system are discussed and some necessary and sufficient conditions are given. Next, the Mayer-type optimal output control issue is considered and an algorithm is provided to find out the control sequence. At last, an example is given to show the effectiveness of the main results.     

A framework for variable content document generation with multiple actors

ContextAdvances in customization have highlighted the need for tools supporting variable content document management and generation in many domains. Current tools allow the generation of highly customized documents that are variable in both content and layout. However, most frameworks are technology-oriented, and their use requires advanced skills in implementation-related tools, which means their use by end users (i.e. document designers) is severely limited.ObjectiveStarting from past and current trends for customized document authoring, our goal is to provide a document generation alternative in which variants are specified at a high level of abstraction and content reuse can be maximized in high variability scenarios.MethodBased on our experience in Document Engineering, we identified areas in the variable content document management and generation field open to further improvement. We first classified the primary sources of variability in document composition processes and then developed a methodology, which we called DPL – based on Software Product Lines principles – to support document generation in high variability scenarios.ResultsIn order to validate the applicability of our methodology we implemented a tool – DPLfw – to carry out DPL processes. After using this in different scenarios, we compared our proposal with other state-of-the-art tools for variable content document management and generation.ConclusionThe DPLfw showed a good capacity for the automatic generation of variable content documents equal to or in some cases surpassing other currently available approaches. To the best of our knowledge, DPLfw is the only framework that combines variable content and document workflow facilities, easing the generation of variable content documents in which multiple actors play different roles.     

从假性紫罗兰酮合成β-紫罗兰酮中主要副产物(I)的分离鉴定

假性紫罗兰酮在浓硫酸及 - 2 0°C低温条件下反应 ,主要生成 β-紫罗兰酮 ,少量的 α-及 γ-紫罗兰酮 ,同时生成副产物 ( I)及 ( II)。用 IR、1H NMR及 MS光谱分析方法 ,对副产物 ( I)进行了结构鉴定 ,结构为 3,4,4a,5 ,8,8a-六氢 - 2 ,5 ,5 ,8a-四甲基 - 2 H - 1 -苯并吡喃