测距仪中新型的脉冲激光光源

针对现有测距仪中脉冲激光器存在寄生多脉冲的问题，提出并实现新型的采用同步泵浦声光调Q方法的测距仪用激光器、消除了寄生脉冲并提高了激光器的峰值功率。     

微型生化分析仪样品室温度控制系统研究

结合微型生化分析仪样品室的要求,设计了一种基于单片机的微型生化分析仪样品室温度控制系统.它以AT89S51为核心,采用单总线高精度数字温度传感器DS18B20对样品室温度采样,同时利用汇编语言编写温度设定与控制程序,采用半导体制冷的方式,实现了温度在25℃、30℃、32℃和37℃四个温度值的稳定,控制精度达±0.5℃.     

WCDMA系统中SPT数字滤波器的一种设计方法

相对于传统的数字滤波器实现方法,符号的2次幂和(SPT)滤波器用移位寄存器替代乘法器,因而资源消耗少、速度快,更加适于专用集成电路(ASIC)设计.介绍了一种适用于宽带码分多址(WCDMA)前向信道中给定基带成形滤波器单位脉冲响应后设计SPT滤波器的方法.相对于传统的理想SPT系数优化方法,此方法更适于给定单位脉冲响应后SPT滤波器的设计,计算复杂度低;仿真结果显示,相对于更加简单的四舍五入方法,此算法在性能上又有可观的增益.     

高能多脉冲超正压射孔技术

高能多脉冲超正压射孔技术是一项利用高能燃料的燃烧在目的层产生压力的超正压射孔或增产新技术。主要介绍了该技术的基本原理和装置的结构设计，并给出了该技术在国内一些油田的应用实例。实例说明，该技术是一项非常好的完井或增产新技术。     

New developments in CdTe and CdZnTe detectors for X and γ-ray applications

There has been considerable recent progress in II-VI semiconductor material and in methods for improving performance of the associated radiation detectors. New high resistivity CdZnTe material, new contact technologies, new detector structures, new electronic correction methods have opened the field of nuclear and x-ray imaging for industrial and medical applications. The purpose of this paper is to review new developments in several of these fields. In addition, we will present some recent results at LETI concerning first the CdTe 2-D imaging system (20 × 30 mm² with 400 × 600 pixels) for dental radiology and second the CdZnTe fast pulse correction method applied to a 5 × 5 × 5 mm³ CdZnTe detector (energy resolution = 5% for detection efficiency of 85% at 122 keV) for medical imaging.     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

往复式压缩机管道的防振设计

分析了往复式压缩机管道产生振动的原因及影响因素,提出解决管道振动的方法及对策。     

Testing of multi-output circuits by means of signature analyzer

Let a circuit havem outputs,m>1. There are two ways to test this circuit by means of a signature analyzer: use a single input analyzer for each output or use anm-input analyzer to test all outputs simultaneously. The main goal of this letter is to demonstrate that for fault output sequences with small multiplicity of errors and long length the second approach is more effective.     

Analytical Calculation of Large-Scale Deflection of Pulse-Loaded Elliptic Plates

Large deflections of pulse-loaded elliptic and round plates made of hardenable elastoplastic materials are investigated analytically using an energy-based approach. Formulas that are convenient for engineering design have been derived.