射频激励扩散型冷却阵列波导CO2激光器技术

本文介绍了目前国内外研究者们提出的各种射频激励相干阵列波导ＣＯ２激光器技术，讨论了射频激励相干阵列波导ＣＯ２激光器技术的一个研究方向。     

超短脉冲光电导开关的全波分析

本文采用时域有限差分法直接求解包含传导电流的三维麦克斯韦方程组,对超短脉冲光电导开关进行全波分析,分析中考虑了静电场影响,采用了比较精确的光电导数学模型。本文还讨论了开关输出信号的模式组成和激光脉冲能量、脉宽对开关性能的影响,并给出了光电导开关响应在不同时刻的三维图形。     

Analysis of polarization plane rotation characteristic in 2D photonic crystal waveguide with chiral medium by condensed node spatial network

Using the photonic band gap in photonic crystals, the fundamental waveguide structures for the light wavelength range have been developed. Based on the fine structure of these many functional devices have been proposed by analytical or numerical simulation methods and the experiments of trial manufacture. In this paper, the treatment of chiral dielectric in the Condensed Node Spatial Network for the vector potential is explained, and we show the polarization plane rotation property in air‐hole and pillar type photonic crystal waveguide structures with the chiral medium substrate. Then, we show the fundamental advantage of the air‐hole type photonic crystal waveguide structure in application to a mode converter. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(1): 7–14, 2005; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20098     

Efficient design of SIW filters with knowledge‐embedded space mapping technique

This article presents an optimization technique for the design of substrate‐integrated waveguide (SIW) filters using knowledge‐embedded space mapping. An effective coarse model is proposed to represent the SIW filter. The proposed coarse model can be analyzed in the available commercial software ADS. The embedded knowledge includes not only formulas but also extracted design curves, which help to build the mapping between the coarse and fine models. The effectiveness of the proposed method is demonstrated through a design example of a six‐pole SIW filter. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

光波导加速度传感器中3dB耦合器设计

光波导加速度传感器是一种实用型加速度传感器,目前广泛应用制备光学加速度计的迈克尔逊、马赫—曾德等干涉仪的核心部件都包含3 dB耦合器。3 dB耦合器的设计对光波导加速度传感器的检测精度尤为重要。介绍了所设计的光波导加速度传感器的工作原理,设计了3 dB耦合器波导的结构和参数,并用光学模拟软件OptiBPM对3 dB耦合器进行模拟。结果表明:所设计的3dB耦合器具有良好性能,符合设计要求。     

求解缓变波导中反问题的一种步进方法

对于声学和电磁学中的大尺度反问题,基于直接方法(例如有限元或者无网格方法)的数值计算往往会导致一个巨大的线性系统,因而在计算速度和存储上并不现实.基于求解Helmholtz方程正问题的Dirichlet-to-Neuman(DtN)算子步进方法,提出了一种用于求解波在大尺度缓变波导中传播的反问题的反向基本解算子步进方法(IFOMM).     

波导-带状线耦合传输的分析

文章分析了波导-带状线通过小孔耦合的传输特性,通过保角变换求出带状线中的场分布,利用小孔衍射理论得到波导-带状线间的耦合度的表达式,并且理论计算值与测量值吻合较好.通过数值分析,结果表明:耦合小孔半径和厚度对耦合度的影响比较大,传输线的工作频带比较宽.     

Study on the characteristics of erbium-doped waveguide ring laser

A theoretical model of the erbium-doped waveguide ring laser is established according to the theory of erbium-doped waveguide amplifier and the transmission matrix of waveguide directional coupler. The influence of bend radius, coupling coefficient and doped erbium ion concentration on the characteristics of waveguide ring laser is investigated. It is shown that due to the co-action of waveguide bend loss and other relevant loss there is an optimal bend radius which can provide simultaneously low threshold pumping power and high laser light output power. As one part of the resonator’s loss, the laser light coupling coefficient of directional coupler has an impact on the laser property. The analysis indicates that the laser achieves the high output power when the coupling coefficient is about 0.2. The threshold pumping power is the minimum when the doped erbium ion concentration is 0.85×10²⁶ m⁻³. Increasing the concentration of doped erbium ions will enhance the output power of laser light as long as the concentration doesn’t introduce remarkable up-conversion effect. The results give a good theoretical basis for the design and fabrication of erbium-doped waveguide ring laser devices. Supported by the National Natural Science Foundation of China (Grant No. 60807015), the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 200801411037), the Young Teacher Cultivation Foundation of Dalian University of Technology (Grant No. 893210) and Doctor Start-up Foundation of Dalian University of Technology (Grant No. 893322)     

Design of a compact dual‐band folded‐waveguide bandpass filter using multilayer waveguide resonators

A novel compact dual‐band bandpass filter based on multilayer folded‐waveguide (FWG) structure is presented in this article.In this design, slots are used to realize direct coupling between adjacent resonators and apertures are adopted to implement cross coupling between non‐adjacent resonators.A new technique of external quality factor of FWG resonator and coupling coefficients between different resonators are studied using full‐wave simulator. In order to demonstrate the proposed technique, a four‐pole dual‐band bandpass filter is designed, fabricated and measured using vector network analyzer. Measurement results which are well agreed with simulation results are presented. Moreover, four‐pole substrate integrated folded waveguide SIFW dual‐band bandpass filter, using two layers of slotted folded waveguide resonators, is demonstrated. The proposed filter has a compact size and it is excellent candidate for the application of wireless communication systems. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:780–788, 2015.     

Novel ultra‐compact two‐dimensional waveguide‐based metasurface for electromagnetic coupling reduction of microstrip antenna array

A novel ultracompact two‐dimensional (2D) waveguide‐based metasurface is proposed herein and applied for the first time to reduce mutual coupling in antenna array for multiple‐input multiple‐output applications. The unit cell of the proposed 2D waveguide‐based metasurface is ultracompact (8.6 mm × 4.8 mm, equal to λ₀/14.2 × λ₀/25.5) mainly due to the symmetrical spiral lines etched on the ground. The metasurface exhibits a bandgap with two transmission zeros attributing to the negative permeability in the vicinity of magnetic resonance and the negative permittivity in the vicinity of electric resonance. Taking advantage of these two features, a microstrip antenna array is then designed, fabricated, and measured by embedding an 8 × 1 array of the well‐engineered 2D waveguide‐based metasurface elements between two closely spaced (9.2 mm, equal to λ₀/13.3) H‐plane coupled rectangular patches. There is good agreement between the simulated and measured results, indicating that the metasurface effectively reduces antenna mutual coupling by more than 11.18 dB and improves forward gain. The proposed compact structure has one of the highest reported decoupling efficiencies among similar periodic structures with comparable dimensions. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:789–794, 2015.