Continuous hydrogen evolution from cyclohexanes over platinum catalysts supported on activated carbon fibers

The continuous production of hydrogen from cyclohexanes is achieved effectively using Pt/ACF (ACF = activated carbon fiber) catalysts in a fixed-bed flow reactor. The Pt catalysts are more effective than a Pd/ACF catalyst for the reaction. Besides cyclohexane, methylcyclohexane, 1,4-dimethylcyclohexane, and p-menthane can also be employed as hydrogen source in the reaction system.     

钢筋混凝土非正常裂缝的产生原因及应对措施

根据钢筋混凝土结构中非正常裂缝的种类，分析了各种裂缝的产生原因，并有针对性地提出了应对措施，以保证建筑物和构件安全和稳定地工作。     

Characterization of Thai limestone for desulphurization in a fluidized bed combustor

The objective of this study is to determine the chemical kinetics of desulphurization of Thai limestone in an atmospheric fluidized bed combustor (AFBC). The experiments, which employed the batch technique using the limestone samples from six major sources in Thailand, were performed in a laboratory‐scale AFBC. The results obtained were analysed and correlated in the form of apparent reaction rate and deactivation rate constants as a function of operating conditions of the furnace and their properties, respectively. The formulae derived from these correlations were kept as general as possible in order that they could be used as input parameters for the selected mathematical model of desulphurization in an AFBC that is suitable for practical use. The predicted results were in good agreement with the experimental data reported in the literature. Copyright © 2003 John Wiley & Sons, Ltd.     

On the Locus of Speed-Accuracy Trade-Off in Reaction Time: Inferences From the Lateralized Readiness Potential.

Lateralized readiness potentials (LRPs) were used to determine the stage(s) of reaction time (RT) responsible for speed-accuracy trade-offs (SATs). Speeded decisions based on several types of information were examined in 3 experiments, involving, respectively, a line discrimination task, lexical decisions, and an Erikson flanker task. Three levels of SAT were obtained in each experiment by adjusting response deadlines with an adaptive tracking algorithm. Speed stress affected the duration of RT stages both before and after the start of the LRP in all experiments. The latter effect cannot be explained by guessing strategies, by variations in response force, or as an indirect consequence of the pre-LRP effect. Contrary to most models, it suggests that SAT can occur at a late postdecisional stage. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Plasticity of feature-based selection in triple-conjunction search.

Two experiments examined the disruption of feature-based selection in triple-conjunction search at multiple target transfers. In Experiment 1, after 10 training sessions, a new target possessing previous distractor features was introduced. This produced disruption in RT and fixation number, but no disruption in feature-based selection. Specifically, there was a tendency to fixate objects sharing the target's contrast polarity and shape and this did not change even upon transfer to the new target. In Experiment 2, 30 training sessions were provided with three target transfers. At the first transfer, the results replicated Experiment 1. Subsequent transfers did not produce disruption on any measure. These findings are discussed in terms of strength theory, Guided Search, rule-based approaches to perceptual learning, and the area activation model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

用热分析法研究硝化棉的熔化过程

用ＭＤＳＣ，显微镜温台熔点测定仪和固体原位反应池／快速扫描傅立叶变换红外光谱联用装置考察了硝化棉的熔化过程。ＭＤＳＣ曲线表明吸热过程是可逆的，它系由ＮＣ和部分分解凝聚相产物的混合物的固液相变所引起。由ＮＣ的ＭＤＳＣ曲线得到的熔点，熔化含，熔化熵，分解含和分解反应热温熵分别为４７６．８４Ｋ，２０５．６Ｊ．ｇ＾－１，０．４３１２Ｊ．ｇ＾－１．Ｋ＾－１，－２４７５．０Ｊ．ｇ＾－１，－５．２４２Ｊ．ｇ＾－     

Cr/SiO_2界面还原反应研究

利用俄歇电子能谱研究了Cr／SiO2薄膜在热处理过程中的界面扩散反应机理、界面反应动力学过程及界面反应产物。研究结果表明，Cr／SiO2体系的界面还原反应主要是Cr与SiO2的反应，其还原反应产物是CrSix和Cr2O3物种。界面还原反应的速度与反应时间的平方根成正比，其界面还原反应过程受Cr向SiO2层的扩散过程所控制，界面还原反应的表观活化能为72．5kJ／mol（约0．75eV）。     

Computational study of transport processes in a single-screw extruder for non-newtonian chemically reactive materials

A numerical study of the transport phenomena arising in a single-screw extruder channel is carried out. A non-Newtonian fluid is considered, using a power law model for the variable viscosity. Chemical reaction kinetics are also included. Finite difference computations are carried out to solve the governing set of partial differential equations for the velocity, temperature and species concentration fields, over a wide range of governing parameters for the case of a tapered screw channel. The numerical treatment for this combined heat and mass transfer problem is outlined. A marching procedure in the down-channel direction is adopted and the validity of the scheme for practical problems discussed. For large viscous dissipation, the material heats up considerably due to the prevailing shear field, affecting the viscosity significantly, and results in large changes in the pressure development at the end of the channel. The rate of reaction controls the mass diffusion rate which in turn affects viscosity and the flow significantly. The dimensionless throughput,q _v , is one of the most important parameters in the numerical solution. The dimensionless pressure variation is very sensitive toq _v , and orders of magnitude changes are possible for small variations inq _v . Schemes for dealing with other important effects such as back flow, heat transfer by conduction in the barrel, and the effect of the die are also outlined. A list of symbols is given at the end of the paper This is publication No. F-10544-4-91 of the New Jersey Agricultural Experiment Station supported by State Funds and the Center for Advanced Food Technology (CAFT). The Center for Advanced Food Technology is a New Jersey Commission on Science and Technology Center. This work was also supported in part by the US Army Research Office.     

CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

TPC方法研究催化剂热分解动力学

设计了ＴＰＣ方法研究催化剂前驱体的热分解；对ＴＰＣ方法求取催化剂的热分解动力学方程进行了理论推导；采用ＴＰＣ方法试验求得了Ｎｉ－Ｚｎ／Ｃ催化剂的热分解动力学参数。试验表明，ＴＰＣ方法能直观、灵敏、方便地反映催化剂活性组份前驱体的本征热分解。