区域可持续发展决策支持模拟系统研究

本文先给出区域可持续发展指标体系；讨论了区域可持续发展决策支持模拟系统及其组成部分，给出区域可持续发展决策支持模拟系统的总体构架，数据库、模型库管理系统及其设计。最后以广州市为例，给出可持续发展决策支持模拟系统的使用效果。     

Controllability of One Spin and Two Interacting Spins

Mathematics of Control, Signals, and Systems - ?We consider the problem of steering control for the systems of one spin ½ particle and two interacting spin ½ particles in an...     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

Review on testers for measuring flow properties of bulk solids

 The author was asked by the International Fine Particle Research Institue (IFPRI) to write a critical review on shear testers for IFPRI-members. The review was delivered to IFPRI in summer 1999. Following the contract with IFPRI it was not allowed to publish the review elsewhere for at least two years. Granular Matter invited the author to submit the review in the original form; during the refereeing process (besides other changes) it turned out that some remarks should be added here for clarification: - Since 1999, the author is not aware of a really new device for testing bulk solid properties, which could lead to a change of the general comments and conclusions provided in the review. It was argued, that the review is referring too much to the work of Jenike, while the works of Johanson and Peschl were not adequately cited. Both are excellent engineers with a lot of experience, but their basic ideas are not available in published form, and if, they are not set in relation to alternative approaches so that an objective comparison in detail would be a future research issue rather than a topic in this report. A discussion on the influence of electrostatic charges was missing. There hardly is an influence, since the particles are in continuous contact. Only with non-conducting plastic particles electrostatic charges could cause problems. But no relevant experiments and results are known. In closed systems, the effect of electric charges is thus mainly neglected, but it is clear that electrostatic forces are eminent in flows with a free surface – an issue not addressed in this review. Received: 1 November 2002     

对一起氮压机燃爆事故的原因分析

SVK8 3S型氮气压缩机是由沈阳鼓风机厂制造、为义马煤气配套的低压氮气压缩机 ,共两套 ,于 2 0 0 0年 1 2月开始调试。为节约工程基建资金 ,取消原设计两台中压氮气压缩机 ,由杭氧产两台3TYS89+2TYS60型氧气透平压缩机临时压送氮气 ,向外供中压氮 ,来取代中压氮气压缩机 ,流程示意图如图 1所示。图 1　氧、氮压机工艺流程配置图1　事故情况2 0 0 0年 1 2月 2 7日中午 1 1∶3 5 ,接总调度室通知 ,要求中午 1 2∶0 0向长输管线供中压氮气。当时 ,一台氮压机试车完毕正在运行 ,一台氧压机试车完毕压氧正在运行 ,将由氧压机临时压送氮气外供…     

金刚烷最新研究

金刚烷是近 30年来发展起来的一种新型精细化工原料。简要介绍了金刚烷的分子结构、性质及其主要用途 ,重点对近年来国内外报道过的金刚烷合成方法进行了评述 ,在此基础上指出了金刚烷化工的未来发展趋势。     

一种基于知识地图集的知识管理系统模型框架

在分析知识管理、知识管理系统(KMS)的含义和知识地图集技术的特点的基础上，提出了一种基于知识地图集的KMS模型框架，并且分析了该模型框架中知识地图集的组成及功能，讨论了KMS中知识地图集和知识存储之间的关系。依据该模型框架，组织易于构建知识管理系统，实现知识资源的共享与充分运用。最后，通过一个实例分析进一步说明了该模型框架的应用。     

高分子量丙烯酰胺-DAC共聚物的研制

采用复合引发体系 ,以丙烯酰胺 (AM)和阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)为共聚体 ,进行水溶液绝热聚合 ,研制了一种DAC单体含量为 4 0 %～ 5 0 %、相对分子质量大于 1× 10 7的阳离子型聚丙烯酰胺。     

制造业跟踪系统解决方案剖析

NetLinx技术的发展，使得跟踪系统发生了划时代的飞跃，在制造业上的应用更加广泛。本文以一间显像管厂为例，详细介绍了跟踪系统在制造业上的应用。     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry