Homoserine Lactones,Methyl Oligohydroxybutyrates,and Other Extracellular Metabolites of Macroalgae‐Associated Bacteria of the Roseobacter Clade: Identification and Functions

Twenty‐four strains of marine Roseobacter clade bacteria were isolated from macroalgae and investigated for the production of quorum‐sensing autoinducers, N‐acylhomoserine lactones (AHLs). GC/MS analysis of the extracellular metabolites allowed us to evaluate the release of other small molecules as well. Nineteen strains produced AHLs, ranging from 3‐OH‐C10:0‐HSL (homoserine lactone) to (2E,11Z)‐C18:2‐HSL, but no specific phylogenetic or ecological pattern of individual AHL occurrence was observed when cluster analysis was performed. Other identified compounds included indole, tropone, methyl esters of oligomers of 3‐hydroxybutyric acid, and various amides, such as N‐9‐hexadecenoylalanine methyl ester (9‐C16:1‐NAME), a structural analogue of AHLs. Several compounds were tested for their antibacterial and antialgal activity on marine isolates likely to occur in the habitat of the macroalgae. Both AHLs and 9‐C16:1‐NAME showed high antialgal activity against Skeletonema costatum, whereas their antibacterial activity was low.     

流花油田老化油高频/高压脉冲交流电场破乳脱水研究

在测定老化油乳化液粘度-温度曲线、含水率反相点曲线的基础上,采用静态静电聚结破乳实验装置研究了油水反相特性对电场破乳脱水效果的影响,使用自主搭建的动态破乳脱水特性快速评价装置研究了高频/高压脉冲交流电场下电场强度和频率对老化油乳化液破乳脱水效果的影响. 结果表明,流花油田老化油反相点含水率约为40%,油水反相过程中乳化液粘度增加,电场破乳脱水难度增大;老化油乳化液含水率为30%时,最优电场强度1.25 kV/cm、电场频率2.5 kHz下破乳后的离心脱水率为97.8%,远高于工频电场下的离心脱水率(4.2%),高频/高压电场破乳比工频/高压电场破乳优势明显.     

自适应混合粒子群约束优化算法及其在软测量模型参数估计中的应用

对于软测量模型参数估计问题, 针对传统梯度法求解非线性最小二乘模型时依赖初值、需要追加趋势分析进行验证和无法直接求解复杂问题的缺陷, 提出将参数估计化为约束优化问题, 使用混合优化算法求解的新思路。为此提出一种自适应混合粒子群约束优化算法(AHPSO-C)。在AHPSO-C算法中, 为平衡全局搜索(混沌粒子群)和局部搜索(内点法), 引入自适应内点法最大函数评价次数更新策略。对12个经典测试函数的仿真结果表明, AHPSO-C是求解约束优化问题的一种有效算法。将算法用于淤浆法高密度聚乙烯(HDPE)串级反应过程中熔融指数软测量模型参数估计, 验证了方法的可行性与优越性。     

Water‐soluble ionic polythiophenes for biological and analytical applications

Ionic polythiophenes are important conjugated polymers because of their excellent optical properties and water solubility. They are classified as cationic, anionic and zwitterionic conjugated polyelectrolytes. This review article describes concisely their biological and analytical applications. The specific detection of different negatively charged biomolecules such as DNA and adenosine triphosphate, anions like halides and toxic pseudo‐halide (CN ^?) and environmental pollutants, e.g. surfactants, is discussed. The conformational changes of cationic polythiophenes (CPTs ) induced by various analytes due to formation of ionic conjugates and the cooperative responses of all segments cause dominant signal amplification even in the presence of a small perturbation. In addition, reactive oxygen scavenging, antimicrobial photosensitizing and cell imaging applications of CPTs are documented. Use of anionic polythiophenes for sensing of protamine and cations like Cu²⁺ and Ca²⁺ is also discussed. Finally, sensing of DNA , peptides and surfactants by zwitterionic polythiophenes is included. The concluding part discusses future prospects. © 2016 Society of Chemical Industry     

Curing enhancement and network effects in multi‐walled carbon nanotube‐filled vulcanized natural rubber: evidence for solvent sensing

Electrically and thermally conductive polymer composites offer great possibilities in various electronic fields because of their low weight and ease of processing. This paper addresses the curing behaviour and network properties of conducting multi‐walled carbon nanotube (MWCNT)‐reinforced natural rubber (NR) nanocomposites, emphasizing the sensing and diffusion performances. NR/MWCNT composites were prepared following a special master batch technique which allows the appropriate distribution of nanotubes within the elastomer. The sensing responses of the composites towards solvents were observed as variations in electrical resistance. Thermal resistance and glass transition behaviour were examined and correlated with the swelling measurements as evidence for solvent sensing. An optimum level of 3 phr of MWCNTs is understood to lead to the best properties for the NR/MWCNT composites. Finally, the structural morphology and interfacial interactions were found to have correlations with cure reactions, glass transition temperatures and sensing responses of all compositions. © 2017 Society of Chemical Industry     

Highly stable hydrophobic SiNCO nanoparticle‐modified silicon nitride membrane for zero‐discharge water desalination

Membrane distillation water desalination can attain a significantly higher water recovery than reverse osmosis, while the lack of stable hydrophobic membranes limits its commercial applications. This article presents the preparation of a new hydrophobic membrane by modifying a porous Si₃N₄ substrate with vesicular SiNCO nano‐particles. The membrane had a water contact angle of 142°, due to the presence of –Si–CH₃ terminal groups and the high surface roughness. The contact angle remained nearly the same after exposures of the membrane to boiling water, aqueous solutions with pH ranging from 2 to 12, and benzene. The membrane exhibited satisfactory water desalination performance on highly concentrated NaCl solutions and simulated seawater. With the highly stable membrane, it is promising to develop a zero‐discharge water desalination process for simultaneous production of fresh water for daily uses and brine for industrial uses. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1272–1277, 2017     

Facile Formation of Medium-Chain-Length Poly-3-Hydroxyalkanoates (mcl-PHA)-Incorporated Nanoparticle Using Combination of Non-Ionic Surfactants

The assembly of nanoparticles incorporating bacterial medium-chain-length poly-3-hydroxyalkanoates (mcl-PHA) via phase inversion emulsification (PIE) was investigated. Sequential addition of water into an agitated mixture of carrier oil (jojoba oil), nonionic surfactants (Cremophor EL and Span 80) and melted mcl-PHA triggered phase inversion of water-in-oil (W/O) to oil-in-water (O/W) emulsion. The emulsion inversion point (EIP) at 30% w/w of water content was determined by abrupt changes in viscosity and conductivity of the suspension. Concurrently, infrared transmittance of the O–H group of water, the C–O–C group of surfactants and the C–H group of alkane chain were practically identical while Small Angle X-ray Scattering indicated the presence of a bi-continuous/lamellar structure. The morphology of the emulsion changed, with increasing water content, from W/O to bi-continuous/lamellar structure and finally to O/W. mcl-PHA appears to form a bridging polymeric network, covering the nanoparticle with a protective layer for enhanced protection of the encapsulated compound. A hypothetical mechanism for the mcl-PHA-based nanoparticle assembly is also proposed.     

Identification of New N‐Acylhomoserine Lactone Signalling Compounds of Dinoroseobacter shibae DFL‐12T by Overexpression of luxI Genes

Bacteria of the Roseobacter clade are widespread in the ocean and occur in many different habitats. In the genome of Dinoroseobacter shibae DFL‐12, luxI homologous genes that encode synthases responsible for the formation of N‐acylhomoserine lactones (AHLs) have been described. These compounds are known autoinducers that regulate several biological traits—namely, flagella formation and cell differentiation—in D. shibae through quorum sensing. The AHLs produced by D. shibae mainly consisted of N‐octadecadienoylhomoserine lactone (C18:2‐AHL) and N‐octadecenoylhomoserine lactone (C18:1‐HSL). In the wild type these AHLs are synthesized only in low abundance. The luxI genes were therefore expressed in Escherichia coli; this resulted in the formation of AHLs mostly different from those found in the D. shibae wild type. A luxI₁‐deficient mutant of D. shibae was then reprovided with an overexpressed luxI₁ gene. This strain produced large amounts of C18:2‐AHL and C18:1‐AHL, allowing full characterization of these compounds by mass spectrometric techniques and derivatization. Synthesis of the proposed structures confirmed that the major compound is (2E,11Z)‐N‐octadeca‐2,11‐dienoylhomoserine lactone ( 6 , C18:2‐HSL), accompanied by (Z)‐N‐octadec‐11‐enoylhomoserine lactone ( 5 , C18:1‐HSL). AHL 6 has not been reported before from other organisms and contains an unusual 2E double bond.