新型单片机控制熔化极脉冲氩弧焊机

采用一种新型弧压反馈闭环控制方式，在每一个周期内都可以保证电弧电压的平均值相同，可以实现稳定可靠的弧长调节。控制系统完全由软件控制器实现，人机界面友好。根据一个脉冲过渡一个熔滴的原则选取脉冲参数，在大量工艺试验的基础上．对脉冲参数的匹配关系进行了优化。试验表明，该机一个脉冲过渡一个熔滴的稳定区间较宽，电弧自身调节能力强，焊缝成形美观，几乎没有飞溅。研制的单片机控制的IGBT逆变式熔化极脉冲氩弧焊机工作可靠，已经投入批量生产。     

基于SOC的PAGER控制芯片设计

文章讨论了PAGER控制器芯片（ZQD021）的系统设计，该控制器内部集成了FLASH，SRAM，POCSAG协议解码器和嵌入式MCU CORE。重点分析了芯片的可测性设计（DFT），内嵌FLASH设计，低功耗设计，其设计方法和思路对消费类和嵌入式控制芯片的设计有一定的借鉴意义。     

单片机系统的硬件抗干扰技术

本文讨论了单片机系统中干扰的特性和主要窜入渠道。提出应根据干扰的机理，有针对性地采取相应措施，才能得到良好的效果。文中从供电系统、过程通道、电路配置等方面讨论了硬件抗干扰的可能方法和工艺措施，并给出了相应的实用电路。     

基于Proteus的汽车空调控制系统的设计与仿真

介绍了利用Atmegal6单片机、Proteus仿真软件开发的汽车空调自动控制系统。利用Atmegal6单片机构建了一个智能型汽车空调控制系统,并对系统的液晶模块、热电阻温度采集、液晶模块显示、继电器控制、键盘输入、风向步进电机控制器进行了设计,用Proteus软件对系统进行仿真。结果表明该系统具有电路结构简单、分立元件少、系统界面友好、操作简单等优点,能满足一般要求的汽车空调的自动控制。     

LD3320的嵌入式语音识别系统的应用

语音交互系统是比较人性化的人机操作界面,它需要语音识别系统的支持。LD3320就是这样一款语音识别芯片。介绍了该芯片的工作原理及应用,给出了LD3320与微处理器的硬件接口电路及软件程序。随着高档MCU的不断出现,以MCU为核心的嵌入式语音交互系统会有非常好的应用前景。     

基于单片机的皮带秤变频调速控制仪的设计与实现

介绍了皮带秤调速控制仪系统实现的原理和方法,提出了在皮带秤调速控制仪的动态跟踪问题,采用模糊-数字PID复合控制算法,既可计量也可以实时跟踪控制产量。实践表明,该控制方法理想地解决了实时跟踪问题,取得了较好的控制效果。     

UV-laser assisted Fabrication of integrated-optical Waveguides

By UV-laser-irradiation a controllable change of the refractive index of some polymers can be attained in the irradiated zone. The detailed UV-photon-induced process mechanisms have been investigated on the basis of PMMA employed as an UV-modifiable model polymer. By mask lithographic methods the UV-laser-assisted technology for the modification of the polymer optical properties enables the local increase of the refractive index and thus the fabrication of integrated-optical waveguiding elements in the surface of a planar polymer chip. These elements are relevant for the manufacturing of complex integrated-optical components. The optical and functional properties of the integrated-optical waveguides have been characterized.     

微机控制多功能晶闸管逆变弧焊电源研究

本文介绍了微机控制多功能晶闸管逆变弧焊电源的主要功能硬件及软件程序设计,微机主芯片采用了单片机 MCS—51,焊机能输出四种静特性,实现一机多用。     

Differential Action of Connexin Hemichannel and Pannexin Channel Therapeutics for Potential Treatment of Retinal Diseases

Dysregulation of retinal function in the early stages of light-induced retinal degeneration involves pannexins and connexins. These two types of proteins may contribute to channels that release ATP, leading to activation of the inflammasome pathway, spread of inflammation and retinal dysfunction. However, the effect of pannexin channel block alone or block of both pannexin channels and connexin hemichannels in parallel on retinal activity in vivo is unknown. In this study, the pannexin channel blocker probenecid and the connexin hemichannel blocker tonabersat were used in the light-damaged rat retina. Retinal function was evaluated using electroretinography (ERG), retinal structure was analyzed using optical coherence tomography (OCT) imaging and the tissue response to light-induced injury was assessed immunohistochemically with antibodies against glial fibrillary acidic protein (GFAP), Ionized calcium binding adaptor molecule 1 (Iba-1) and Connexin43 (Cx43). Probenecid did not further enhance the therapeutic effect of connexin hemichannel block in this model, but on its own improved activity of certain inner retina neurons. The therapeutic benefit of blocking connexin hemichannels was further evaluated by comparing these data against results from our previously published studies that also used the light-damaged rat retina model. The analysis showed that treatment with tonabersat alone was better than probenecid alone at restoring retinal function in the light-damaged retina model. The results assist in the interpretation of the differential action of connexin hemichannel and pannexin channel therapeutics for potential treatment of retinal diseases.     

WiNoC中基于Edge first算法的流量平衡设计

在无线片上网络中,无线节点拥塞以及不同子网和全局网络内的流量平衡情况对整个片上网络的通信效率有着重要的影响,为此提出了基于Edge first算法的全局流量平衡机制（GTB）。首先优化了划分有线无线数据包的机制,减少了无线节点处的拥塞;其次根据无线路由器（WR）的拥塞情况,提出Edge first路由算法平衡子网内的流量;最后在全局网络中提出了全局子网拥塞感知（GSCA）判断机制,使得长距离数据包优先从低拥塞子网通过,平衡了全局网络的流量。实验表明,该方案在可接受的硬件开销、功耗开销下,保证较低的网络延迟和较高的网络吞吐率,并且大幅的提升了网络的流量平衡性能。