基于TDLAS-WMS的近红外痕量CH_4气体传感器

为了对煤矿CH4气体进行实时监测,基于混合可调谐二极管激光吸收光谱(TDLAS)与波长调制光谱(WMS)的检测技术,采用中心波长为1.65μm的分布反馈(DFB)激光器,设计并研制出痕量CH4气体传感器。利用自主设计的DFB激光器温度控制器,通过调节激光器工作温度,进而使其发光光谱扫描CH4气体的吸收跃迁谱线。同时利用WMS检测技术将待测信号频率移至高频区,减小1/f噪声。利用该痕量CH4气体传感器,在被测气体体积分数为(0~106)×10-6的范围内,对二次谐波信号进行了提取。测试结果显示:在(0~106)×10-6范围内相对测量误差小于7%,检测下限为11×10-6。同时,研究人员可以通过更换其他波长的激光器,实现对其他气体的检测。     

用虚拟仪器技术验证牛顿第二定律

牛顿第二定律是经典力学的基本定律之一,为了形象、直观、准确地验证牛顿第二定律,本文利用数字实验系统生动地展示F=ma的关系。通过本实验可以使学生获得更直观的教学感受。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

基于磁通门传感器的铁磁探测系统设计

在核磁共振检查前需要进行无磁化确认,针对核磁共振检查所处的环境背景磁场复杂、干扰较多,系统出现误报警高、探测失效等问题,设计了基于磁通门传感器的铁磁探测系统。系统使用二次谐波法测量磁场信号,设计模拟电路进行信号相敏检测。通过积分反馈提高闭环系统的线性度和抗干扰性,探头工作在稳定的状态。采用卡尔曼滤波对背景磁场和磁异信号进行处理,提高信号信噪比,同时设计能量检测器对磁异信号进行检测。试验测试结果表明,系统在核磁共振室外复杂磁场环境可以减少设备工作时的误报警,有效探测出铁磁性物质。     

二次供水水质变化原因探讨

对福州市二次供水用户用水点进行了采样和水质分析，结果表明供水水质变化的主要原因是二次供水引起的水质污染，提出了防止水质二次污染的建议与措施。     

一种基于压缩域的实时跟踪改进算法

在基于压缩域的实时跟踪算法中,判别函数对目标外观考虑不足易造成跟踪精度较低。为此,提出一种改进的基于压缩域的实时跟踪算法。利用稀疏测量矩阵提取候选目标的低维多尺度特征,并根据在线更新的特征概率分布,采用朴素贝叶斯分类器判别目标与背景,实现粗跟踪。通过视频帧间候选目标内部区域所具有的相似性,在粗跟踪的基础上实施基于动态目标外观模型的二次跟踪,在线寻找目标的最佳跟踪位置。对多种跟踪视频库的测试结果表明,该算法在不过量增加计算负荷的情况下能有效提高跟踪精度。     

基于连续缓存和二级缓存的DFTL改进算法

DFTL(demand-based FTL)是一种根据负载访问特点动态加载映射项到缓存中的知名FTL(flash translation layer)算法,但是它没有考虑到请求的空间局部性,而且缓存中的一个映射项剔除就可能会导致翻译页的更新,缓存中映射项的频繁剔除又会导致额外的擦除操作.在DFTL的基础上,提出了SDFTL(sequential/second cache DFTL)算法.SDFTL新设置连续缓存和二级缓存,连续缓存通过预取映射信息,利用请求的空间局部性,提高了FTL对连续负载的处理性能;二级缓存通过暂存从一级缓存中剔除的、发生更新的映射项,并采取批量更新策略回写到闪存,减少了闪存的翻译页写回次数和擦除次数.利用实际负载做的实验结果显示,SDFTL相比DFTL缓存命中率平均提高41.57%,擦除次数平均减少23.08%,响应时间平均减少17.74%.     

硫化镉微晶掺杂玻璃及薄膜的制备与光学性能的研究

用溶胶－凝胶法制备了硫化镉微晶掺杂玻璃和薄膜材料，使用了三种不同的方法引入所需的Ｓ＾２－离子，通过Ｘ射线和透射电镜等实验手段，分析了微晶结构显微相，标定出晶体确为ＣｄＳ，并测得微晶的尺寸。从室温吸收光谱上观察到吸收截止边随着ＣｄＯ掺杂凝胶在１５０℃时通Ｈ２Ｓ气体时间的延长（１－８ｈ）而移向长波方向，从而确定其为量子尺寸效应的实验依据。在Ｎｄ：ＹＡＧ强激光光场的作用下，薄膜样品中观察到二次谐波信号，     

软弱破碎围岩隧道二衬施作的合理时机判别研究

为了合理判别软弱破碎围岩隧道的二衬施作时机,结合工程实践,通过洞室拱顶沉降和边墙变形收敛的现场监控量测,提出了利用围岩-初支系统变形实测数据判别软弱破碎围岩隧道二衬施作合理时机的考虑支护是否保守的五级速率比值法并研发了相应的软件,并通过工程实例进行了成功验证。研究表明：1研制的软件操作具有界面简洁、友好,以及操作简单易用的特点,具有测点围岩-初支系统位移和收敛的现场监测数据的录入、储存、修改和管理等功能,能方便地进行软弱破碎围岩隧道的二衬合理时机判别;2通过工程实例验证分析表明,提出的方法是可行的,与现行的二衬时机选择的方法本质上是相同的,但更加具有可操作性,研究成果可以为同类型隧道的二衬时机选择提供可资借鉴的方法。     

Small-angle neutron scattering from branched epoxide resins

Small-angle neutron scattering experiments in the range of q² from 0.01 to 25 nm⁻² have been carried out on branched epoxide resins based on bisphenol-A at the Institute Laue—Langevin (I.L.L) in Grenoble (q=(4π/λ) sin(θ/2)). Measurements were made with six samples in the range of M_W from 1500 to 19 000 and four concentrations between 1.3 and 10% (w/w) in deuterated diglyme. The results are as follows: (i) The mean square radius of gyration follows a relationship S²_z=4.69×10⁻⁴M^1.20_W (nm²). (ii) In all cases fairly large second virial coefficients A₂ are obtained which, however, decrease strongly with molecular weight. Above M_W=2500, the virial coefficient follows the relationship A₂=1.6M^−0.85_W (mol cm³g⁻²). (ii) The reciprocal particle scattering factor as a function of q² exhibits only a slight upturn and otherwise shows the behaviour of a randomly branched polycondensate. The slight upturn is discussed as being caused by the finite volume of the monomeric unit. Possible reasons for the high exponent in the S²_z versus M_W dependence are briefly discussed.