Performances of carbon nanotube field effect transistors with altered channel length

The influence of channel length on the performances of carbon nanotube field effect transistors(CNT-FETs) has been studied.Buffered oxide etching was used to remove approximately a 60 nm layer from the original 100 nm silicon dioxide layer,to thin the dielectric layer of the back gate.Channel length of the CNT-FETs was changed along with the etching process.The dependence of drain-source current on gate voltage was measured to analyze the performance of the CNT-FETs,including the transconductance,carrier mo...     

麦秸秆加筋盐渍土的尺寸效应与制样问题处置

制备均匀且整体性较好的试样是保证室内实验结果可靠的前提条件。提出了两端压实的静力制样法,围绕制样中出现的几个问题,制定了适宜的应对措施。同时完成了不同直径的盐渍土和麦秸秆加筋土试样的抗压强度实验,分析了试样抗压强度的尺寸效应,以及试样直径与加筋条件间的比例关系。结果显示:采用两端压实的静力制样方法制备加筋土试样是可行的;两种试样均存在明显的尺寸效应;由于麦秸秆的加筋作用,使得麦秸秆加筋土不同尺寸试样的抗压强度尺寸效应大于盐渍土的,且其抗压强度的尺寸效应随试样尺寸的增大而越来越明显;适宜加筋长度为0.316倍试样直径,适宜加筋率0.25%。研究结果可为制备合格的加筋土试样提供参考,也有益于在未来的研究中选择更合理的麦秸秆加筋条件。     

解读欧盟REACH法规

随着中国出口贸易的快速发展,各种非关税贸易磨擦接踵而至,面对新的挑战,防范和应对国外技术、贸易壁垒已引起我国有关部门的高度关注。产业界如何从技术上适应国际局势的变化已成为可持续发展的战略任务。介绍了欧盟REACH的主要内容和目标,分析了该系统可能对我国电池产业的影响,指出制定我国行业技术性贸易措施的必要性。     

Identification of plant model of linear induction motors for a traction system intended for use in a high‐performance controller

A linear induction motor (LIM) is suitable for use in trains. The motor can be used in both wheel‐suspended and contact‐less types such as the Linear Metro and HSST trains in Japan. The LIM has end winding as well as asymmetrical winding. The end effect is a major problem in the LIM, and it makes the analysis, design, and control of motors difficult. This paper describes a method that combines numerical analysis and the equivalent circuit for the LIM in order to design a high‐performance controller for the LIM that includes the end effect. A sample basic field‐oriented control scheme that is based on the plant model is applied to the LIM in order to check the control performance. The theory of rotary induction motors is used for verification. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 179(2): 44–54, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21171     

烟气污染物协同治理中的负协同效应串联作用现象

随着烟气污染物协同治理技术在燃煤电站的普遍应用,协同治理过程中各单元设备间的不良影响及其造成的设备治理能力下降或污染物增量排放现象日益显现,对此类负协同效应展开分析,并通过性能试验、检测化验、运行诊断等方法对某350 MW机组进行研究,结果表明：存在负协同效应串联作用现象,即上游设备的负协同效应不断蚕食本体或下游设备的污染物治理能力,最终导致设备治理能力不足。最后,提出控制及消纳负协同效应的建议。     

p型InGaN/GaN超晶格N面GaN基LED的光电特性

随着氮(N)面GaN材料生长技术的发展,基于N面GaN衬底的高亮度发光二极管(LED)的研究具有重要的科学意义.研究了具有高发光功率的N面GaN基蓝光LED的新型结构设计,通过在N面LED的电子阻挡层和多量子阱有源层之间插入p型InGaN/GaN超晶格来提高有源层中的载流子注入效率.为了对比N面GaN基LED优异的器件性能,同时设计了具有相同结构的Ga面LED.通过对两种LED结构的电致发光特性、有源层中能带图、电场和载流子浓度分布进行比较可以发现,N面LED在输出功率和载流子注入效率上比Ga面LED有明显的提升,从而表明N面GaN基LED具有潜在的应用前景.     

改进的萤火虫群优化算法及其非线性盲源分离

摘要：根据萤火虫算法的特点,针对萤火虫算法较早进入局部收敛的不足进行改进,引入了“挡板效应”的方法,扩大种群多样性,并提出了BGSO算法。在分析了非线性盲源分离模型的基础上,利用系统两次遍历萤火虫群,比较评价函数,获得最优解的方式。其有效性被仿真结果所证实。     

Triboelectric and Piezoelectric Effects in a Combined Tribo‐Piezoelectric Nanogenerator Based on an Interfacial ZnO Nanostructure

In this contribution, combined triboelectric and piezoelectric generators (TPEG) with a sandwich structure of aluminum‐polydimethylsiloxane/polyvinylidene fluoride composite‐carbon (Al‐PPCF‐Carbon) are fabricated for the purpose of mechanical energy harvesting. Improved by the surface modification of PPCF with zinc oxide (ZnO) nanorods through a hydrothermal method, the TPEG generates an open‐circuit voltage (V_oc) of ≈40 V, a short‐circuit current (I_sc) of 0.28 μA with maximum power density of ≈70 mWm^?2_, and maximum conversion efficiency of 34.56%. Subsequently, in order to understand the transduction mechanism of the triboelectric and piezoelectric effects, analyses focusing on the potential composition ratio in the final output and the impact of ZnO interfacial nanostructure are carried out. The observed potential ratio between triboelectric and piezoelectric effects is 12.75:1 and the highest potential improvement by ZnO nanorods of 21.8 V is achieved by the TPEG fabricated with spacer. Finally, the relationships between the voltage, power density, conversion efficiency, and the external load resistances are also discussed. Overall, the fabricated TPEG is proved to be a simple and effective nanogenerator in mechanical energy conversion with enhanced output potential and conversion efficiency.