Use of FRP for RC Frames in Seismic Zones: Part II. Performance of Steel-Free GFRP-Reinforced Beam-Column Joints

The use of FRP as reinforcement in concrete structures has been growing rapidly due to its advantages over conventional steel reinforcement (e.g., corrosion resistance, light weight, magnetic neutrality). A potential application of FRP reinforcement is in structural concrete frames. However, current seismic design standards and detailing criteria for beam-column joints were established for steel reinforcement and may be unsuitable for FRP reinforcement due to its different mechanical properties. During recent earthquakes, many structural collapses were initiated or caused by beam-column joint failures. Since there are no detailed specifications for the application of FRP reinforcement in seismic zones, research is needed to gain a better understanding of the behaviour of FRP-reinforced concrete under seismic loading. In this study, two full-scale beam-column joint specimens reinforced with steel and GFRP, respectively, were tested in order to investigate their performance in the event of an earthquake. The control steel-reinforced specimen is detailed according to the Canadian Code (CSA A23.3-94) recommendations. The GFRP-reinforced specimen is detailed in a similar scheme but using a GFRP grid. The behaviour of the two specimens under reversed cyclic loading, their load-storey drift envelope relationship and energy dissipation ability were compared. The GFRP-reinforced specimen showed a predominantly elastic behaviour up to failure. While its energy dissipation was low, its performance was acceptable in terms of total storey drift demand.     

外源NO和ABA对杨树气孔运动和SOD及POD活性的影响

研究了外源NO和脱落酸(ABA)对杨树气孔运动和SOD、POD活性的影响。结果表明：NO和ABA均可诱导杨树叶片气孔关闭，且NO有加强ABA诱导气孔关闭的作用。NO清除剂(C—PTIO)能显抑制NO和ABA对气孔关闭的诱导效应。不同浓度硝普钠(SNP)和ABA处理杨树离体叶片，SOD活性变化不明显，POD活性受到显抑制。粗酶液的体外实验结果表明，不同浓度SNP对POD活性的抑制呈明显的浓度及时间效应；而ABA对POD活性则几乎没有影响。说明在ABA调控气孔运动的过程中需要NO的参与，由此推测ABA对杨树叶片气孔运动的调节与NO对POD的抑制有关。     

光谱分析的微机测试

介绍了一种用光电倍增管将光信号转换为电信号,再将此信号放大经模数转换后输入到微机、打印机等设备的一套光谱分析的微机处理方法,此种方法与传统的干板照像法进行比较,在进行光谱分析时省时、省力、误差小,实现了光谱分析的微机化。     

工频信号相位和幅值测量的新方法

本文提出了一种利用8031单片微机系统测量工频信号的相位和幅值的新方法,此法只需对两个信号进行三次采样后,再经简单的运算,就能得到两个信号的相位差、幅值以及其它许多重要的电量。     

交通信号智能控制仿真系统

根据交通信号智能控制过程中的各种复杂情况,研制了一个微观仿真的实用系统。微观仿真系统可实现交通路网编辑模块、交通参与者模型、交通信号控制模型、方案评价模型等,还能够实现多种方案的动态实时仿真,提高信号控制方案选择的有效性。     

Simulation of X-ray pulsar signals with multiphysical properties

In view of the few and discontinuous X-ray pulsar data, based on the physical properties of the X-ray pulsar real data from the Rossi X-ray Timing Explorer (RXTE) spacecraft, this paper adopts the fast iterative method and the 10 μs time transformation model, simulates the X-ray pulsar signals which have the periodic property, spectral property, and the background noise property as well as a variety of delay effects. We design and implement simulation software which can simulate the X-ray pulsar signals with multi-physical properties. The results of comparing the real data and simulation data in the same situation show that the simulation noises and the actual noises have the same distribution, that the period stability of the simulated X-ray pulsar data agrees with the real data, with the error of only 0.43％, in different energy levels, that the simulated data's integrated profile and the real data's standard profile are highly correlated with the Pearson correlation coefficient of 0.99, and that under the 10μs time transformation model, the time conversion accuracy of the simulation data can reach 10^-7s, the error between the simulation and the real data being just only 10^-7s, which meets the time transformation accuracy. Therefore, the proposed method can realize the high-fidelity simulations and generate the continuous pulsar signal with many physical properties.     

基于PRONY模型的谐波检测

信号的去噪问题一直是信号检测的一大难题,而要检测的信号往往却存在不同的随机噪声。在分析周期信号的基础上,提出了一种基于PRONY模型的周期信号分析法。经过对周期短(窄)脉冲信号的实验,这种直接构造的PRONY算法在周期信号中能达到有效、准确的分析结果。     

高能同步辐射光源逐束团束流位置测量电子学研制

基于高能同步辐射光源（HEPS）储存环,研制了一套逐束团束流位置测量（BPM）电子学系统,电子学的硬件部分由模拟信号采集板卡和数字信号处理板卡组成,软件部分由底层固件和顶层应用软件组成。系统的采样频率为500 MHz,带宽为1 GHz,对来自储存环BPM探头的4路模拟信号进行数字化,得到束团幅度数据,利用ZYNQ芯片计算出每个束团在真空管道中的位置。逐束团BPM电子学在实验室的测试结果为：输入信号峰峰值小于1.8 V时ADC通道非线性度小于1%,无杂散动态范围约60 dB,灵敏度系数取8.26 mm时位置分辨率优于10 μm,测试结果满足HEPS逐束团BPM的需求。     

一种大动态检测输入前端设计

一种基于小信号处理、无源网输入、数字化处理、智能化操作的方法,以求获得较好的灵敏度和极大的测量动态范围的测量前端电路设计。     

DSP人机接口电路设计

对TMS320F2812型数字信号处理器的硬件资源和相应的外部设备进行了详细的介绍,分析了19264液晶显示器的接口电路、控制系统,以及按键的结构.在此基础之上,利用TMS320F2812型数字信号处理器的GPIO口对按键电路和液晶接口电路进行了设计,通过调试和仿真后发现本方案可行.