唐山建龙900mm冷轧机组的工艺与设备

较系统地介绍了我国第1条国产化的中宽带钢冷连轧生产线，即唐山建龙钢铁控股有限公司900mm冷连轧生产线的工艺流程、主要设备组成及技术特点。重点介绍了900mm 4机架六辊轧机的技术参数、性能特点及自动控制系统。该生产线投产以来，取得了较好效果。     

Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide (TiO2) as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry (CVAAS). Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg2 on the dithizone-modified nanoparticles was investigated in detail. It was found that excellent adsorption ratio for Hg2 could be obtained in the pH range of 7-8 with an oscillation time of 15 min, and a 5 mL of 3.5 mol·L-1 HCl solution could quantitatively elute Hg2 from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit (3σ) for Hg2 was calculated to be 5 ng·L-1. The proposed method was applied to the determination of Hg2 in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD (n = 5) of 2.9%-3.5%.     

多晶硅太阳电池用SiN薄膜的研究进展

SiN薄膜因为具有良好的减反射性质和钝化作用，已经越来越广泛地应用于多晶硅太阳电池的制造工艺中，介绍了SiN薄膜在硅太阳电池中的性质，制备方法等研究现状，同时提出了存在的问题并展望了今后的发展趋势。     

用于微波/射频集成电路的一种新型低损耗介质——多孔硅及氧化多孔硅厚膜

提出在单片微波集成电路(MMIC)中用多孔硅/氧化多孔硅厚膜作微波无源器件的低损耗介质膜.研究了厚度为70μm的多孔硅/氧化多孔硅厚膜在低阻硅衬底上的形成,这层厚膜增加了衬底的电阻率,减少了微波的有效介质损耗.通过测量在低阻硅衬底上形成的氧化多孔硅厚膜上的共平面波导的微波特性,证明了在低阻硅衬底上用厚膜氧化多孔硅可以提高共平面传输线(CPW)的微波特性.     

激光结晶a-Si:H SOI离子注入和快速退火

本文对激光结晶a-Si∶H SOI结构砷注入和快速退火行为作了研究.a-Si∶H激光结晶有Lp-LCR,OD,FCR-2,FCR-1四个结晶区.用剖面电镜观察了结晶区的结构.扩展电阻测量表明Lp-LCR区中有两种扩散机制,即杂质在晶粒体内扩散和沿缺陷扩散.OD区中有三种扩散形式,除有上述两种以外,还有沿缺陷的扩散.首次比较了沿晶界和缺陷的扩散速度.     

百万吨级乙烯冷箱的设计

分析了百万吨级乙烯冷箱的设计难点和采取的对策，介绍杭氧设计、制造的乙烯冷箱的技术参数和设计方案，与国外公司设计方案的比较，说明杭氧乙烯冷箱的设计、制造技术与世界先进水平的差距大大缩小。     

A Cold Model Aerodynamical Test of Air-Staged Combustion in a Tangential Firing Utility Boiler

The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.     

浦项开发35W270以上牌号无取向硅钢

钢中加Sn和Sb得到优良的磁性，铁损低和磁感高。与加B的比较，晶粒大，立方织构、高斯织构、（100）[uvw]纤维体积份数很高和γ-纤维体积份数很低，增加磁感的磁各向异性和降低铁损的磁各向异性。进行常化与未经常化的比较，最终晶粒大。（100）纤维份数：热轧板的最低，冷扎后变成最高。铁损的各向异性与织构因数之间成反比，磁感的各向异性与织构因数之问成正比。开发出了35W270-250高牌号无取向硅钢。     

Flash-lamp annealing of semiconductor materials—Applications and process models

Flash-lamp annealing (FLA) on a millisecond time scale has been shown to be a promising tool in the preparation of high-quality semiconducting materials. The process imposes time varying through-thickness temperature profiles on the substrates being processed, and consequently thermal stresses. A combined thermal and optical model has been developed to predict the substrate temperature distribution and this model has been linked to a structural model to compute stresses and deflections. The paper shows how these models can be used to explore process conditions in flash lamp annealing, with particular regard to the annealing of ion implants in silicon and the crystallization of amorphous silicon layers on glass substrates.     

Influence of additives on electrodeposition of bright Zn-Ni alloy on mild steel from acid sulphate bath

The influence of a condensation product (CP) of veratraldehyde (VRTD) and p-amino benzoic acid (PABA) on Zn-Ni alloy electrodeposited onto mild steel was studied in acidic sulphate solutions. Ethylenediaminetetraaceticacid (EDTA) and cetyltrimethylammoniumbromide (CTAB) were used as complexing and wetting agents, respectively. The effect of bath constituents, pH, current density and temperature on nature of deposit were studied through Hull cell experiments. The bath constituents and operating parameters were optimized. Deposit properties and corrosion resistance were discussed. Throwing power, current efficiency and polarization studies were carried out. SEM photomicrographs of the deposit obtained from optimum bath revealed fine-grained deposit of the alloy in the presence of condensation product and hence modified the morphology of zinc-nickel alloy deposit. IR spectrum of the scrapped deposit showed inclusion of addition agent.