Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.     

PVC型材低温落锤破裂影响因素的分析

从型材内筋壁厚、加工助剂、辅助原料、塑化控制、模具流道等方面分析了PVC型材低温落锤破裂影响因素，并提出了提高PVC型材低温落锤冲击性能的建议。     

计算机单元模拟在三聚氰胺装置冷气风机分析上的应用

简述了三聚氰胺生产流程、冷气风机的作用和结构,介绍了冷气风机密封泄漏的计算机单元模拟过程,提出了以风机进出口温差作为判断其密封泄漏量大小的依据。     

微量有机化合物催化燃烧反应器数学模拟

建立了甲苯、二甲苯、环己烷催化燃烧反应器的一维拟均相数学模型 ,在MnCuOx/Al2 O3 催化剂上催化燃烧反应动力学采用Langmuir双曲型动力学方程。模拟计算了废气处理量、废气中有机化合物的浓度、床层入口温度对净化率的影响     

引汉济渭椒溪河隧洞施工通风数值模拟研究

引汉济渭工程是陕西省为缓解关中渭河沿线城市和工业缺水问题,而提出的由汉江调水到渭河流域的大型水利工程。椒溪河段工程为穿河段,地形地质相对复杂,隧洞施工期的通风问题也相对比较严重。采用CFD(Computational Fluid Dynamics)数值模拟方法对带有支洞隧洞的通风过程进行模拟,研究几种典型工况下隧洞内的流场和浓度场在施工期时随时间的变化规律,分析掌子面以及支洞内涡流对气流及有害气体分布的影响。在气流排散通道不顺畅时,掌子面附近的涡流区域内涡流的大小和位置呈现周期性的变化,并随通风时间的增加影响范围逐渐降低。隧道爆破产生的有害气体和烟尘会随着气流的流动发生移动和扩散过程,并逐渐排向洞外。通过对隧洞主洞与支洞内气流和有害气体排散过程的研究,得出隧洞爆破后在通风作用下隧洞的掌子面附近和支洞与主洞的交叉位置处形成涡流区,涡流的产生和变化不断的消耗通风的机械能,降低通风效率,对有害气体的排散造成一定的阻滞作用,隧洞内有害气体的排散过程包括移动和扩散两方面,移动过程将CO排向洞外,扩散过程不断的降低洞内CO峰值,总结出了不同工况下隧洞内达到安全浓度的时间,对隧洞施工进度给出一定的参考意见。     

消能锥形阀过流状态研究与优化

消能锥形阀是一种用于中、高水头下的消能控流阀门,其内部结构设计的好坏直接影响着控流效果。为探究消能锥形阀在不同开度下,过流流量及内部流场的变化情况。进行了模型试验与CFD数值模拟计算,试验中发现开度从100%关至85%时出现了流量反而上升、进口压力下降的情况。利用CFD数值模拟的方法对内部流场进行了可视化研究。研究结果表明,在全开状态下锥形阀内部存在以下问题:过强的局部高速高压区域、低速流动死区范围过大、涡流区过度影响高速过流部分。并对锥形阀进行了一定的结构改进,优化了其内部流场情况。     

家电卷材涂料用HDI改性聚酯树脂的研制

以己二异氰酸酯（HDI）改性聚酯树脂与氨基树脂配制成家电用卷材涂料。阐述了氨酯键对涂膜性能的贡献。探讨了HDI用量对涂膜性能的影响。     

Towards identifying the roll motion parameters of a motorcycle simulator

This study aimed at identifying the roll motion parameters of a motorcycle simulator prototype. Experienced motorcyclists tuned the angular physical movement of the mock-up and that of the visual scene to achieve an optimal riding experience during curves. The participants exceeded the rolling angles that would be required in real-world riding, while avoiding leaning the mock-up beyond 10°. In addition, they were more influenced by the speed of the virtual motorcycle than by road curvature, especially in a wide field of view. Heterogeneity was found in the roll applied to the visual scene. The overall patterns suggest that at least when washout is not applied to remove the side forces that in real-world riding are compensated by a centrifugal force, greater roll of the visual at the expense of the mock-up is mandatory to avoid performance biases that might be enhanced due to fear of falling off the simulator. Future roll motion models must take into consideration factors such as riding postures, which might not only influence the forces operating on the rider-motorcycle system, but also how motorcyclists perceive the visual world.     

Entanglement Loss in Fast-Flowing Entangled Polymer: Numerical Simulation of The Short-Chain Behavior and Interpretation of Phenomenology

Although some of the important consequences of flow-induced entanglement loss in entangled polymer rheology have recently been recognized, this specific molecular mechanism has rarely been investigated quantitatively based on experiments or molecular theories. For the first time, the amount of entanglement loss of a short entangled linear polymer (i.e., seven entanglements per chain at equilibrium) during fast-flow deformation is directly tracked in the stochastic simulation of an existing reptation model. The primary finding is that significant entanglement loss is observed in both fast elongation and fast shearing, and, contrary to some earlier conjectures, is particularly pronounced in elongational flow when polymer chain stretching formally commences. Furthermore, according to the current simulation in which three different CCR (Convective Constraint Release) schemes are considered, entanglement loss appears to have very prominent effects on the elongational rheology of an entangled linear polymer – an observation that had rarely been recognized or considered before. On the other hand, the currently explored features of flow-induced entanglement loss are tentatively linked to a wide variety of peculiar empirical properties of temporarily entangled polymer liquids. In particular, we are thus able to provide a consistent molecular explanation of the fairly well-known phenomenological effects of polydispersity and long-chain branching leading to a pronounced strain-hardening phenomenon, in view of two newly proposed effects of heterogeneous relaxations in preventing, directly or indirectly, fast entanglement loss during flows.     

纸厂浆纸动态优化产耗存数学模型研究及系统设计

针对纸厂的浆纸生产过程,通过建立浆纸动态优化产耗存数学模型,开发浆纸动态优化系统,用于计算系统的浆纸平衡情况,合理安排生产计划,预测设备维修时各工段的停车时间,并提供浆纸平衡的监控手段,避免生产过程的不正常波动.