Simulation of Fe-Al compounds developed during single superphosphate manufacture

In order to analyse iron phosphate complexes and gel-like phases encountered in the single superphosphate process, experiments were performed with a free-Al, Fe apatite crystal of Durango from Mexico phosphate rock and sulfuric acid. Reaction products were studied by X-ray diffraction and surface analysis methods namely X-ray photoelectron spectroscopy and scanning electron microscopy. Results show that in a free Al, Fe-system, part of the Ca(H₂PO₄ )₂.H₂O (MCPM) forms before precipitation of any CaSO₄(CS) and gel-like phase such H₂SO₄.yH₃PO₄.xH₂O is formed. When iron is added, the precipitation rate of (CS) and (MCPM) increases and Fe₃(H₃O)H₈(PO₄)₆.6H₂O is formed. When Fe and Al are added, a gel-like phase is quickly formed with a molar ratio that changes with time and develops into crystalline compounds. The composition of this gel may be represented as a mixture of two phases: H₂SO₄.yH₃PO₄.xH₂O and a gel containing Al-Fe-Si.     

过磷酸钙折流混合器的改进

由于绿原化工有限公司过磷酸钙装置生产能力由 6 70 t/ d(实物量 )提高到 84 0 t/ d,折流混合器负荷增大 ,出现折流环磨损加快等问题。采用若干技改措施 :扩大折流环内径、改变折流混合器喷射方向、采用新材料制作折流环 ,使折流混合器能满足 84 0 t/ d过磷酸钙生产的需要     

高水头船闸一字闸门水动力特性数值模拟

针对某山区高水头船闸30 m淹没水深下一字闸门的水动力特性进行研究,借助FLUENT软件提供的Realizable k-ε紊流模型对门体启闭过程非恒定流场进行动态模拟,通过建立由二维平面混合网格纵向拉伸成的三维棱柱体网格,结合2.5D重构和弹性光顺动网格法,在降低网格数量、提高计算效率的同时,实现一字闸门启闭全过程三维流场模拟。引入VOF法对自由水面迭代求解,得到一字闸门启闭过程门前后水位差及动水阻力矩变化规律,将计算结果与模型试验进行比较,两者吻合较好。模拟计算发现:门底间隙对闸门运行整个阶段动水阻力矩均有影响,动水阻力矩峰值随门底间隙增大而变小。     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Electrochemical reduction of nitrate on Pt(S)[n(1 1 1) × (1 1 1)] electrodes in perchloric acid solution

The electrochemical reduction of nitrate ion was studied by cyclic voltammetry on Pt(1 1 1) and [n(1 1 1) × (1 1 1)] stepped Pt surfaces, where n (=14, 10, 7, 6, 5, 4, 3, 2) is the number of terrace atoms, in 0.1 M HClO₄ + 10 mM KNO₃. The electrocatalytic nitrate reduction was found to hardly proceed on Pt(1 1 1) in the hydrogen adsorption region, while the electrocatalytic activity was improved with the increase in the step density. Inactivation was observed in the presence of adsorbed hydrogen or nitrate-derived reduced adsorbate, i.e. adsorbed NO, on (1 1 1) step sites. It was, therefore, concluded that the electrocatalytically active NO₃⁻ species does not adsorb on the (1 1 1) terraces but on the (1 1 1) monoatomic steps. The nitrate reduction current increased with the step density in a non-linear relationship. The overall current density at 0.21 V (RHE) corresponding to the peak potential of the main electrocatalytic nitrate reduction wave which was maximum at n = 2, abruptly increased with short terraces, i.e. n < 5, where the current wave of adsorbed hydrogen on the Pt stepped surface with comparatively narrow (1 1 1) terraces, denoted as H_nt, also appeared unmodified for n < 5 on voltammograms recorded in 0.1 M HClO₄ in the absence of nitrate.     

基于GPS/GIS的公共安全监测系统的研究

GPS技术在公共安全监测领域中的应用正向高精度、实时化和自动化的方向发展。GPS公共安全监测不仅注重结果,还要分析产生变形的原因。要实现这一目标,就需要借助于G IS的空间分析功能,即需要建立一种基于GPS/G IS的公共安全监测系统。研究了GPS监测的似单差数学模型和算法流程,由于该模型只用到L1载波相位观测值及伪距,因此可适用于单频接收机,从而降低监测成本。同时,结合GPS公共安全监测的特点,提出了GPS/G IS公共安全监测系统的技术路线。     

Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.     

过磷酸钙含氟尾气处理的新方法

对动态泡沫床处理过磷酸钙含氟尾气的有关技术及费用作了说明 ,指出该方法费用高 ;提出一种新方法 ,该方法不加任何化学助剂 ,采用水作吸收剂 ,只需改变动态泡沫床一些设计参数和选用一种特殊的喷头 (喷头周围设计 1个圆锥形死角区 ,使含氟气体不可能进入该区 )避免了硅胶堵塞。该方法已在湖南浦市化工总厂运行 1年多未发现堵塞 ,同时该法投资少、能耗低、排放尾气达标     

负载型中孔分子筛催化剂的研究进展

本文对M41S中孔分子筛作载体的负载试剂的研究进展进行了综述，主要介绍了负载酸型、负载碱型和负载氧化型催化剂的研究现状，以及对其应用和发展前景作了总结和评述。     

聚乙烯与聚丙烯单组分复合材料研究进展

综述了聚乙烯、聚丙烯单组分复合材料的发展概况及最新研究动态。介绍了熔融膜压法、粉末浸渍法、溶液浸渍法三类制备聚乙烯单组分复合材料的传统方法。重点介绍了热压法、共挤出热压法两类制备单组分复合材料的创新方法。分析了各制备方法的优缺点:熔融法、粉末法与溶液法效率均较低且复合材料中纤维含量较少,力学性能不佳;热压法由于初始材料为100％纤维,从而综合效率较高,力学性能良好,缺点为加工温度过于苛刻;共挤出热压法效率较高,在具有高的增强相含量的同时拥有较宽的加工温度范围,缺点为增强相强度需进一步提高。最后介绍了单组分复合材料的应用并对其研究与应用前景作了展望。