Neural network systems to reproduce crash behavior of structural components

The use of neural networks as global approximation tool in crashworthiness problems is here investigated. Neural networks are not only asked to return some meaningful indices of the structural behavior but also to reproduce load-time curves during crash phenomena. To contain the number of examples required for the training process, parallel subsystems of small neural networks are designed. Design points for the training process are obtained by explicit finite element analyses performed by PAMCRASH. The settlement of the points in the design domain is defined using a maximum distance concept. The procedure is applied to different typical absorption structures made of aluminum alloy: riveted tubes, honeycomb structures, longitudinal keel beam and intersection elements of helicopter subfloors.     

TCP/IP网络的动态模型描述

拥塞现象成为TCP/IP网络发展面临的一个重要问题。因此，拥塞控制对TCP/IP网络的鲁棒性和稳定性具有重要作用。目前，网络拥塞控制策略主要包括两类：端到端的控制机制，如TCP拥塞控制算法；网络内部的主动队列管理(AQM)策略。但由于缺乏对网络系统动态特性的了解，这些拥塞控制策略大都基于专家经验，并没有建立完整的理论分析框架。为此，本文从数据流的角度出发，通过建立网络基本单元状态方程模型来实现IP网络系统的数学解析模型，然后用混杂系统来描述TCP带有拥塞控制策略的数据传输过程，建立了TCP/IP网络的动态模型，为网络系统中动态性能的分析、拥塞控制策略的设计奠定了基础。实验结果表明，该数学模型与NS仿真实验的结果相一致。     

A Theoretical Framework for Core Material Properties Identification in Cellular Solids using Novelty Detection

Abstract:  This paper presents a novelty detection-based technique to identify core material properties of honeycombs and cellular structures. A numerical model (finite element) representing full scale and/or reduced size of the cellular solid is used to generate transmissibilities between topological homologous points at cells in different locations. In order to make the procedure robust against noise, these transmissibilities are artificially corrupted. This step is representative of a series of experimentally obtained measurements which automatically return information relating to the size and shape of data noise along with the mean measurement. The next stage, both in this paper and in the proposal for the experimental approach, is to generate several further sets of transmissibilities from the finite element model; the only difference being that the core material properties are altered from the original values. A novelty detection framework is then adopted to find a similarity measure between each of these 'test' transmissibilities and the original set thereby identifying the material properties. Although this work is concerned with identifying only one material property, the methodology extends to identifying several properties.     

小型中间下料预焙电解槽技术条件摆布的思考

对小型中间下料预焙电解槽技术条件摆布的原则和具体数据进行了探讨，提出了尽可能利用从大型预焙槽上得出的先进经验，并消化吸收，掌握好各种条件的平衡，以取得好经济技术指标的观点。     

Determination of vitality from a non-invasive biomedical measurement for use in fingerprint scanners

Fingerprints are the oldest and most widely used biometrics for personal identification. Unfortunately, it is usually possible to deceive automatic fingerprint identification systems by presenting a well-duplicated synthetic or dismembered finger. This paper introduces one method to provide fingerprint vitality authentication in order to solve this problem. Detection of a perspiration pattern over the fingertip skin identifies the vitality of a fingerprint. Mapping the two-dimensional fingerprint images into one-dimensional signals, two ensembles of measures, namely static and dynamic measures, are derived for classification. Static patterns as well as temporal changes in dielectric mosaic structure of the skin, caused by perspiration, demonstrate themselves in these signals. Using these measures, this algorithm quantifies the sweating pattern and makes a final decision about vitality of the fingerprint by a neural network trained by examples.     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

A neural network model for fault detection in conjunction with a programmable logic controller

This paper discusses the feasibility of using neural networks as a tool in the fault detection process. A neural network is integrated with a state language programmable logic controller, an important device in an automatic control system. Time series data related to time spent in a state is gathered and used as input into a neural network, for the purpose of identifying when a fault has occurred. A feedforward neural network is used to identify which (if any) of three types of faults may have occurred. Experimental results related to sensitivity and accuracy measures are presented. A brief review of related applications and research is also presented.     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

小型水电站联网改造应注意的几个问题

针对铜鼓县小水电站联网时存在的问题及其不利影响进行了分析，井提出了改进途径，指出小水电站的联网改造应立足安全，争取效益。