结构振动控制中压电阻尼技术研究：（三）机敏约束层阻尼技术

给出了机敏约束阻尼概念，阐述了机敏约束层阻尼系统特征，分析了结构设计和系统建模方法。以典型梁系统为例，比较了被动约束阻尼技术和机敏约束层阻尼技术减振效果。结果表明；机敏约束层阻尼控制技术是一种更为有效的振动控制方法。最后，提出了今后重点研究问题。     

Advancing controlled release packaging through smart blending

Researchers from Rutgers University and Clemson University have collaborated to develop a concept of using smart blending to generate functional packaging films for the controlled release of active compounds such as antimicrobials, antioxidants and flavour compounds to extend the shelf‐life of food. In this paper, literature results are reviewed to justify the significance of controlled release packaging (CRP) and the research gaps for further development are identified. A major research gap is the lack of packaging materials that can provide the release of active compounds at rates suitable for a wide range of food packaging applications. Smart blending is a promising technology for bridging this research gap. To fully realize the potentials of smart blending, a systematic approach for developing CRP using smart blending is also presented. Copyright © 2005 John Wiley & Sons, Ltd.     

用于微波/射频集成电路的一种新型低损耗介质——多孔硅及氧化多孔硅厚膜

提出在单片微波集成电路(MMIC)中用多孔硅/氧化多孔硅厚膜作微波无源器件的低损耗介质膜.研究了厚度为70μm的多孔硅/氧化多孔硅厚膜在低阻硅衬底上的形成,这层厚膜增加了衬底的电阻率,减少了微波的有效介质损耗.通过测量在低阻硅衬底上形成的氧化多孔硅厚膜上的共平面波导的微波特性,证明了在低阻硅衬底上用厚膜氧化多孔硅可以提高共平面传输线(CPW)的微波特性.     

基于ASK无线数传模块的新型安防系统

将无线数传模块和具有低噪声的策控制电路集成设计为一体，构成检测信号和开关量控制信号无线传输的功能模块，并将该模块嵌入到探头和控制器内部，建立无线通讯子网，应用于智能能楼宇安防系统。很好的解决了无线信息冲突问题。经过试运行，系统工作稳定，无线探头报警可靠性达到了使用需求。     

微波非接触式智能卡中射频系统和电路的设计实现

采用了Agilent公司ADS2002软件、Ansoft公司的Ensemble软件对微波非接触智能卡中射频系统和电路进行了仿真和设计。主要进行收发信道性能的仿真、天馈系统设计以及各单元电路之间匹配电路的设计。     

TEMIC射频卡的速率自适应读卡算法

提出种基于TEMIC射频卡Manchester编码的速率自适应读卡算法,并对该算法进行了说明和示例。     

Cost-effective smart power CMOS/DMOS technology: design methodology for latch-up immunity

To answer to the need of a cost effective smart power technology, an original design methodology that permits implementing latch-up free smart power circuits on a very simple CMOS/DMOS technology is proposed. The basic concept used to this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up. The efficiency of the design methodology is experimentally shown.     

Optoelectronics in satellite designs

Design of artificial satellites for communication, remote sensing and scientific investigations follows, at present, a fixed pattern based on existing and proven technologies and the requirements of payload or experiment within the constraints of weight, volume and power available. The advances in optoelectronic components and systems have opened up a new dimension in designing satellites of the future, incorporating new technologies. This paper deals with general satellite design concepts based on optoelectronic systems wherever applicable.     

Achievement of specificational information usage with true and false feedback in learning a visual relative-mass discrimination task.

Participants' usage of informational variables in learning visual relative-mass discrimination in collisions was tracked by means of PROBIT correlations. Four groups received feedback that was true or accorded with either of three nonspecificational cue variables. A majority in each group adopted the feedback, but several participants defied the false feedback. Unlike in previous research, the fit to data of the relative-mass invariant could not be bettered by post hoc linear combinations of the cues. Discriminability was lower in the use of the invariant. Analytic complexity was rejected as an explanation for discriminability differences. A "smart mechanism" for pickup of the relative-mass invariant was developed as an extension of G. Johansson's (1950/1994) vector model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

射频MEMS压控电容器

研究了射频 MEMS压控电容器的设计和制造工艺。压控电容器的制作采用了 MEMS制造技术 ,其主要结构为硅衬底上制作金属传输线电极和介质层 ,然后制作金属膜桥作为电容器的另一个电极。通过改变加在金属膜桥与传输线间的电压达到改变电容值的目的。这种压控电容器可以工作于射频和微波波段 ,具有很高的Q值。测试结果如下 :在 1 GHz、0 V时 Q值达到 3 0 0 ,0偏压电容值为 0 .2 1 p F,当加上驱动电压后 Cmax/ Cmin的变比约为 4∶ 1