全方位太阳辐照度测量系统设计

设计一种以DSP为核心的全方位太阳辐照度测量系统,利用安装在云台上的太阳能电池板的转动以获取全方位的太阳辐照度数据。通过对采集到的数据进行分析,既可以测试太阳能电池板在各种安装方式（如平放、斜放和幕墙）下的发电效率,又可对光伏建筑一体化的光伏电站建设方案进行评估,还可在建成之后对光伏电站的发电状态进行管理和监测。     

太阳能帆板输出功率短期预测研究

在卫星观测中,经常由于各种原因导致短时间内无法提取目标卫星数据,使控制系统无法继续对其保持高精度跟踪和控制。文章主要研究ARIMA模型在卫星遥测数据短期预测中的应用。使用Matlab软件进行ARIMA模型参数计算,再使用SPSS软件执行数据预测,并进行残差分析,通过实例验证,短时期内的预测数据精度较高。     

太阳风粒子数据映射模型的设计与实现

为了能够快速获得第三级太阳风粒子可分析处理的结构化数据,本文采用将数据映射到内存和采用语言集成查询技术解决数据的完整映射和快速访问。通过设计数据映射模型,将用PDS数据的数据标签和数据产品分别映射到模型的值域和属性域,解决本地或网络数据内存映射的问题。为测试这个实例,采用双倍缓冲和贝塞尔插值技术对数据能谱进行了实时绘制。结果表明该模型具有高效性、完备性和高吻合度。这个基于内存映射的模型能够较好地解决异构数据快速结构化数据访问的数据源动力不足问题,为进一步处理和分析太阳高能粒子的频谱、成份和通量及随时间、空间变化的分布特征等提供了基础。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

光热电站容量效益评估及影响因素研究

光热发电作为一种清洁能源,配置储热后具有良好的调节性能,近年得到大力发展。依据自身经济性,光热电站往往配备较大的储热装置,能够平移所吸收的光热能,且具有跨日调节能力,使得光热机组有一定替代常规机组带负荷的能力,即容量效益。本文提出一种基于等可靠性的光热电站容量效益评估方法,考虑了调峰方式、储热时长、新能源规模、光热电站规模对光热电站容量效益发挥的影响,采用基于数学优化的生产模拟仿真程序,以周为尺度,计算全年8760 h的系统运行状态,计及了机组启停、水电跨日调节、抽蓄跨日调节、光热电站的跨日调节等因素。最后通过对西北地区实际电网的仿真,验证了所提方法的有效性。     

水泥工业碳减排路径分析

介绍了目前国内的碳中和背景及发展现状,并基于水泥产业碳排放的相关数据,对该行业碳减排的方法和途径进行分析。水泥工业90%的二氧化碳排放来自熟料生产(碳酸钙分解、燃料燃烧),其余的10%来自原材料的准备和水泥制品的生成。指出发展创新减排燃烧、节能降耗技术、提高替代燃料掺烧量以及二氧化碳的捕集、封存与利用（CCUS）,是实现水泥产业碳中和的主要手段。     

STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

1. IntroductionSolar selective thiIl solid fil1us are the key part for solar heat collect'ors. But ll1ostfactories still produced solar absorptive filn1s by traditional tecIl11ology sucl1 as pai1ltillga1ld electrocl1eluical process that nlust result in po…     

Effect of oxygen precipitates in solar grade silicon on minority carrier lifetime and efficiency of solar cells

The effect of oxygen precipitates on minority carrier lifetime and performance of solar cell was studied by means of Fourier Transform Infrared Spectroscopy (FTIR), quasi-steady state photoconductance (QSSPCD), optical microscope, spectrumresponse and solar cell efficiency test. The minority carrier lifetime and performance of solar cell reduced depend on oxygen precipitates. A few of oxygen precipitates have formed after single-step annealing; and they do not impact the efficiency dramatically. Pre-annealing at 650 ℃ for 4 h enhances the oxygen precipitation when it is subjected to middle temperature annealing. The solar cells performance decayed sharply. Especially annealing at 950 ℃ for 3 h, the V os and I sc of cells decrease 12% and 25% respectively. Few oxygen precipitates have formed in silicon after high temperature annealing at about 1050 ℃ whether pre-annealing is used or not, and the performance of cells is notbe affected.     

太阳能吸热功能膜材质

材质中电子能级和振转能级决定光谱的选择性。     

Preparation of solar selective absorbing CuO coating for medium temperature application

A new method of preparing CuO solar selective absorbing coating for medium temperature is presented. After pretreatment, brass was overlaid with CuO by chemical plating. The effects of reactant concentration, reaction temperature and reaction time on the absorptivity of CuO coating were investigated. The optimized condition of preparing CuO coating was obtained. The CuO coating was analyzed with X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). In order to prolong the period of use, the CuO coating was protected by TiO₂. The experiment shows that the TiO₂/CuO coating is more heat-resistant, acid-resistant, and wear resistant than CuO coating, without losing absorptivity markedly. The TiO₂ coating can reduce emissivity and protect the CuO coating. Translated from Journal of Tianjin University, 2006, 39(12): 1485–1489 [译自: 天津大学学报]