Improved one-dimensional beam model for unbalanced composite single-lap joint

An analytical nonlinear solution was provided for unbalanced composite single-lap joint (CSLJ) using an improved one-dimensional beam model, which incorporated the effect of bending–tension coupling. The bending–tension coupling stiffness was introduced to characterize the coupling bending and tension behavior induced by the un-symmetric stacking sequence of composite laminates. The governing differential equations captured the bending–tension coupling behavior and the geometrically nonlinear features were constructed based on the displacement compatibility conditions of flexible interface. The transverse deformation in overlap region, edge moment factors and adhesive stress distributions for the unbalanced CSLJ with inflexible, intermediate flexibility and flexible adhesive can be determined by the present one-dimensional beam model. The accuracy of the present model was validated by the comparison with nonlinear finite element model. The effect of bending–tension coupling on edge moment factors and peak values of adhesive stresses was shed light on with the present model.     

Study of crystal structure,dielectric, magnetic and magnetoelecrtic properties of xCoFe2O4-(1-x)Na0.5Bi0.5TiO3 composites

Multiferroic composites of spinel ferrite and ferroelectric xCoFe₂O₄ – (1-x)Na_0.5Bi_0.5TiO₃ (with x = 0.10,0.30,0.50) were efficiently prepared by standard solid state reaction mechanism. X-ray diffractometer was used to analyze crystal structure of the prepared composites. The observed XRD patterns of the composites comprise peaks of both the phases i.e. ferrite and ferroelectric, with no sign of secondary peaks. Rietveld refinement of XRD data further confirms the coexistence of these two phases with cubic (Fd3m) and rhombohedral (R3c) symmetry corresponding to ferrite and ferroelectric phase respectively. The 3-dimensional overview of crystal structure of pure CoFe₂O₄ and Na_0.5Bi_0.5TiO₃ and of composite 0.50CoFe₂O₄?0.50Na_0.5Bi_0.5TiO₃ is generated by using refined parameters. The dielectric constant (ε´) and dielectric loss (tanδ) values were recorded as a function of frequency ranging from 100?Hz to 7?MHz and at different temperatures. Both ε´ and tanδ follow dispersion pattern at lower frequencies while show frequency independent behavior at higher frequencies. The magnetic evaluation carried by analyzing M-H hysteresis loop reveals the ferrimagnetic characteristics of these composites. The highest value of magnetic moment is 1.12μ_B observed for composite 0.50CoFe₂O₄ – 0.50Na_0.5Bi_0.5TiO_3. Magnetoelectric (ME) voltage coefficient (α) was also demonstrated to observe the interaction between ferrite and ferroelectric phases. The highest value of α (72.72μV/Oe cm) is obtained for low ferrite composition 0.10CoFe₂O₄ – 0.90Na_0.5Bi_0.5TiO₃, which suggests the dependence of magnetoelectric response on the resistivity of the composites.     

液力偶合器叶片焊接工装的设计与分析

本文介绍了液力偶合器泵轮涡轮叶片焊接工装的发展过程,并介绍了一种采用蜗轮蜗杆装置定位分度轮的叶片焊接工装的工作原理.     

套筒与轴热套装过程的接触有限元分析

运用MSC.Marc对套筒与轴的热套装过程进行有限元模拟,涉及热机耦合分析和接触分析。在建立合理的有限元模型、正确定义和选择边界条件的基础上,分析套筒受热自由膨胀状态以及套筒与轴过盈配合的应力应变,最后通过对比分析模拟结果与试验结果验证有限元分析的合理性,为结构的进一步改进提供理论依据。     

微波活化法从甲烷合成乙烯

利用微波活化法从甲烷催化偶合合成了乙烯。在5% Pt/c Lot 86111催化剂情况下得到了3.65%甲烷转化率和近100%的乙烯选择性。同一催化剂在热反应条件下完全没有反应活性。     

g玻色子对轻核的影响

本文通过分别对 sd-IBM4中的 O(6)极限 U(36)U_6(sd)×U_6(ST)O_6(sd)×O_6(ST)O_3(d)×O_3(S)×O_3(T)O_3(J)×O_3(T),强耦合 SU(3)极限 U(36)U_6(sd)×U_6(ST)SU_3(sd)×SU_3(S)×SU_3(T)SU_3(sdS)×SU_3(T)O_3(J)×O_3(T)与 sdg-IBM4中的类SO(6)极限 U(90)U_(15)(sdg×U_6(ST)SU_(15)(sdg)×U_6(ST)U_5(sdg)×O_6(ST)SO_5(dg)×O_6(ST)O_3(dg)×O_3(S)×O_3(T)O_3(J)×O_3(T),强耦合 SU(3)极限 U(90)U_(15)(sdg)×U_6(ST)SU_(15)(sdg)×U_6(ST)SU_3(sdg)×SU_3(S)×SU_3(T)SU_3(sdgS)×SU_3(T)O_3(J)×O_3(T)的分析比较,表明 g 玻色子对 O(6)极限的典型能谱有较大的影响,当用类 O(6)极限同时拟合~(34)S 与~(34)Cl 的能谱时,对~(34)Cl 能得到很低的3_1~+态,而用 O(6)极限则不能,而且能谱结构也改变较大.但 g 玻色子对强耦合 SU(3)极限的低能态能谱与 E2跃进,则影响不大.     

万向节机构及等速性分析

本文分析了轴头式和凸块式万向节的运动特性,归纳了等速原理,探讨了各种万向节的演化。     

液力偶合器的应用

文章简述了液力偶合器调速装置的工作原理、结构、特点和应用范围.20t/h抛煤机链条炉鼓、引风机风量调节,由挡板式改造为液力偶合器调节后,节电效果显著.     

新型光学耦合器——梯度折射率透镜

本文用三种方法研究了钛扩散铌酸锂平面光波导与阶跃型多模光纤的耦合.通过测量的数据及理论分析计算,提出了一种新的最佳的光学耦合方法,可改善能量在光纤中的傅输性能,提高耦合效率     

柱承式贮(群)仓在水平地震作用下的扭转效应

文章引入扭转效应系数的概念,根据群仓平移—扭转耦联振动微分方程,应用反应谱振型分解法,导出了群仓周期扭转效应系数和支柱内力扭转效应系数的解析公式。经过分析简化,找出了主要控制参数,提出了考虑群仓的地震扭转效应时,支柱地震内力的工程算法,并给出了工程设计用数值计算表。