列车客车用低温发热电缆地面辐射供暖系统的实验研究

对不同地板结构和不同导线间距下发热电缆地面辐射供暖系统的热工性能进行了测试分析，考察了系统的稳定性和可靠性，给出了综合比较结果，分析了影响发热电缆地面辐射供暖系统热工性能的主要因素及其影响规律。     

浅谈城市集中供热工程造价的控制

就城市集中供热工程造价的控制问题，从对设计阶段的成本、施工过程，加强材料成本、工程结算的控制几方面对其进行了详细的阐述，最后对工料分析与检查方面进行了论述，以提高供热企业的投资效益。     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

An Electron Spin Resonance Study of Evolution of Organic Free Radicals in Irradiated Pepper During Heat Treatment

ABSTRACT: The thermal evolution behavior of the organic free radicals induced in irradiated black pepper was studied by electron spin resonance spectroscopy. To analyze the time-dependent evolution process, we used the theory of transient phenomena, that is, an ordinal differential equation, as well as the nonlinear least squares numerical method. We found that the radical evolution that occurred in the irradiated pepper obeys a single exponential function and yields a unique time constant. The evolution of the organic free radical undergoes a simple reaction process of a single radical species.     

Use of oxygen for the cleaning, passivation, and preservation of power-generating equipment at the Kharanorskaya SAPP

Studies conducted on two power-generating units at the Kharanorskaya SAPP relative to the steam-water-oxygen passivation, preservation, and partial cleaning of all boiler-heating surfaces, including the surfaces of the reheater, and passivation of the surfaces of the high-pressure heaters on the steam and water sides by the steam-oxygen method, as well as partial passivation, preservation, and cleaning of turbine blading are presented. __________ Translated from élektricheskie Stantsii, No. 6, pp. 56–64, May, 2006.     

PSI’s 1 kW imaging furnace—A tool for high-temperature chemical reactivity studies

A new experiment has been installed to conduct studies at temperatures as high as 2500 K on chemical reactions that involve solids or melts and the release of condensable gases. The sample is radiatively heated by a 1 kW xenon short arc lamp placed in the upper focus of a vertically oriented ellipsoid of revolution. The optimal optical configuration has been determined by a Monte-Carlo Ray tracing method. Several methods to machine the reflector have been evaluated by experimentally determining the optical quality of the surface of plane test pieces. In the imaging furnace the sample is placed on a water-cooled support and heated by the concentrated radiation. This arrangement allows for fast heating and impedes the reaction of the sample with crucible material. A remotely controlled hammer allows for freezing the high-temperature composition of the sample by a fast quench. Thus, the sample can be later analyzed by conventional methods such as XRD or TEM. To allow for measurements under defined atmospheres and to protect the ellipsoidal reflector from liberated condensable products, the entire sample stage is enclosed by a hemispherical glass dome. The dome itself is protected from condensable compounds by a laminar flow of inert gas. Experiments with an incense cone at the place of the sample to visualize the gas flow showed that a steady layer of inert gas protects the dome from smoke, if the inert gas flow is properly adjusted. Measured peak flux densities clearly exceed 500 W cm⁻² required to access temperatures of at least 2500 K. Decomposition experiments on copper sulfides confirmed the operation of the furnace. In the near future flash assisted multi-wavelength pyrometry (FAMP) will be implemented to measure sample temperatures online. Though the imaging furnace was developed to study the decomposition of metal sulfides it is obviously suited to conduct high-temperature studies on most materials relevant for high-temperature solar technology.     

Prediction of higher heating values for saturated fatty acids from their physical properties

Higher heating values (HHVs) of fatty acids (C₄–C₁₈) were measured and correlated using linear least square regression analysis. Equations were developed for the estimation of the HHVs of saturated fatty acids from their molecular weight (Mw), density (DN) and carbon number (CN). These equations are HHV = 0.0518 Mw + 29.76, HHV = −93.4 DN + 122.67 and HHV = 0.7271 CN + 31.419 with R² values of 0.9895, 0.9798, and 0.9895, respectively. The correlations may be used for HHV estimation of mixtures of fatty acids developed from vegetable oils.     

浅谈热水采暖系统运行调整方法

介绍了热水采暖系统运行及调整的注意事项，分析了立支管阀门、集气罐的作用，提出了使热水采暖系统的调节和集排气操作达到理想程度的有效措施，以实现良好的供暖效果。     

电加热井的井筒温度场数学模型

运用传热学理论，通过对稠油从井底流出井筒的温度变化、井筒原油与地层之间热交换过程的传热机理研究，建立数学模型，可以模拟不同产量、不同含水的井筒温度剖面，以及电加热所需功率，从而为稠油井电加热生产方案的制定提供科学依据。     

碳化硅加热元件的电性能和使用

本文介绍碳化硅加热元件的电特性、表面负荷以及工作气氛对它的影响，并对它设计和使用要点举例予以说明。