06NiCuCrMoNb钢高温加热时表层铜的行为

将06NiCuCrMoNb钢试样在不同的加热温度保温不同时间后，观察并分析试样表层的形貌和成分。结果表明，在一定条件下铜会扩散进入表层奥氏体晶界，得到沿奥氏体晶界分布的富铜相，并在热变形加工时导致热脆。试验得到了沿奥氏体晶界分布的富铜相与加热温度和保温时间的关系。     

华能玉环电厂4×1 000 MW超超临界机组锅炉用钢

介绍了华能玉环电厂我国首台100 MW超超临界机组锅炉联箱与管道、水冷壁、过热器、再热器、省煤器等的钢材选用原则,简述了P92、P122、super304H、HR3C等新材料特点以及在国内电站建设中的应用情况。     

自润滑料垫的设计及其在立推式铝锭加热炉上的应用

本文详细论述了我公司自主开发的自润滑料垫的结构设计和技术特点，分析了这种料垫的优缺点，对其应用前景进行了展望。     

Varying Electron Cyclotron Resonance Heating on the Levitated Dipole Experiment

Plasmas in the Levitated Dipole Experiment (LDX) are formed and sustained currently via two electron cyclotron resonance heating (ECRH) sources: 2.5 kW at 2.45 GHz and 2.5 kW at 6.4 GHz. An important topic being investigated is how varying the ECRH affects the confinement and stability of the plasma. We report the results of using different operational combinations of our RF sources, such as varying the power composition, changing the power levels, and sequencing of the onset time.     

Waste-to-energy based greenhouse heating: exploring viability conditions through optimisation models

An optimisation approach is proposed in order to assess the technical and economic feasibility of a renewable-energy-based greenhouse in North-Eastern Italy. A floor heating system that can exploit a low-temperature heat flow coming from the condenser of a waste-to-energy plant is chosen for the greenhouse and designed developing a non-linear optimisation model, solved by a genetic algorithm. In order to determine under what conditions the combination of a floor-heating-based greenhouse with a waste-to-energy plant can be profitable, a mixed integer optimisation model is introduced to allow selection of the minimum cost fuel solution as a function of different design variables of the greenhouse, such as indoor temperature settings and floor area. The ranges within which the renewable energy solution can lead to significant savings in comparison to traditional fossil fuel are identified both from the point of view of costs and of environmental impact. Furthermore, the sales prices for waste heat that would make investment in the renewable energy solution attractive for potential entrepreneurs are given.     

Uneven gridding of thermal nodal networks in floor heating simulations

In this paper, the use of an uneven nodal network in floor heating simulation with finite difference heat balance method is examined. Two floor heating test cases, homogenous and multilayer floor, are presented. Temperature distributions on the floor surface and heat flows through the floor surface are simulated with even and uneven gridding approaches. It is shown that the total number of nodes can be reduced by placing the densest gridding in sections where the curvature of the temperature gradient is steepest.     

利用热管纺丝技术一步法生产FCY

利用平板型热管纺丝装置对普通高速纺丝机进行技术改造，并一步法生产出充分结晶的ＰＥＴ纤维（ＦＣＹ）。该纤维可直接用于织造，调节热管温度、热管安装位置可获得满足后道工序不同需要的ＦＣＹ。     

耐高温辐射涂料在加热炉上的应用

分析了耐高温辐射涂料(HT—1)在加热炉应用的节能机理,工业实验取得良好效果。     

中国先进研究堆冷中子源核发热和冷中子增益研究

为准确计算和研究中国先进研究堆（CARR）冷中子源装置氢系统的核发热和冷中子增益，建立了一整套计算方法。对参考堆的验证计算证明了该方法的正确性和有效性。对影响CARR冷中子源核发热和冷中子增益的各种因素（如慢化剂、冷包材料、冷包形状等）进行了计算和优化选择。结果表明：在核发热量较小的条件下获得了较好的冷中子增益。     

宣钢棒材加热炉悬臂辊道的改进

对宣钢棒材加热炉出入炉悬臂辊道漏水、烧损等现象进行了分析，提出了改进措施。