Study of direct and indirect naphtha recycling to a resid FCC unit for maximum propylene production

To satisfy the increasing propylene demand, direct and indirect naphtha recycling schemes around an existing resid fluid catalytic cracking (FCC) unit were investigated. To this aim, light cracked naphtha (LCN), heavy cracked naphtha (HCN) and a PolyNaphtha (PN) oligomerisation product were cracked under a wide range of operating conditions over a commercial Y zeolite based equilibrium catalyst. Experimental data were acquired in three different units: a fixed bed bench scale unit, a fixed fluidised bed unit and an adiabatic circulating fluidised bed pilot plant. It was shown that FCC naphthas require high operating severities to crack, and that even then their conversion remains relatively moderate. Hence, direct recycling to the main riser does not seem a viable pathway to increase propylene product. Feeding FCC naphthas to a second reaction zone operating at high severity allows to increase the propylene yield in a significant manner. Increasing conversion, however, not only leads to higher LPG and propylene yields, but also results in very high dry gas yields. An alternative scheme was proposed, in which the olefinic C₄ and C₅ fractions are converted into a naphtha fraction through oligomerisation in a dedicated unit before being recracked in the secondary riser. As the highly olefinic oligomerised effluent mainly consist of dimerised and trimerised butenes and pentenes, this feed is more easily cracked and high conversions can be achieved. This indirect interconversion of butenes and pentenes into propylene therefore effectively allows to convert these butenes and pentenes into propylene, resulting in a significant increase in propylene yield. Each of the three main naphtha recycle options (directly to the main riser, directly to a secondary riser or indirectly via a light olefin oligomerisation unit) have been analysed and compared to a base case. In the evaluation of each of these schemes, all heat balance effects, both on the riser and the regenerator side, have been accounted for. The proposed process scheme with an indirect recycle via an oligomerisation unit enhances the already inherent flexibility of the FCC unit. The naphtha recycle can be turned on or off, the second reaction zone can be used to crack naphtha or to crack resid feed to maximise throughput, while the effluent of the oligomerisation unit can be recycled to the FCC unit for propylene production or hydrogenated and sent to gasoline and kerosene pool.     

Estimation of the Substrate Concentration Profiles in Petroleum Pipelines Containing Biofilms

In industrial systems, the formation of biofilms can cause many problems, such as an increase in the flow resistance of pipelines, energy losses in fluid transport and heat exchangers, product contamination, materials deterioration, and biocorrosion. As a result, biofilms contribute substantially to economic losses in the industry. Corrosion is particularly an issue in the petroleum industry and its implications range from down-hole completion through petroleum processing units. Much of this corrosion is attributed to microbial activities. This paper proposes a mathematical model for predicting substrate concentration for such microbial growth. Substrate concentrations in the system and near the biofilm surface are one of the parameters that has a great effect in determining the extent of the problems associated with biofilms. In this study, a convective-diffusion model under various flow conditions (stagnant, laminar, and turbulent) has been solved using the finite difference technique, employing the alternating direction implicit (ADI) method. The model assumes that a liquid containing substrate and bacteria is flowing in a pipeline with known concentrations at the inlet and then predicts the variation of the transient (as a function of time) substrate concentration along the pipeline and as a function of the pipe radius. The model is then used to predict and estimate the substrate concentration profiles on the biofilm surface under different environmental conditions. A parametric study was also conducted to study the effect of the different parameters influencing the substrate concentration profiles in the system and on the biofilm surface.     

The concept of an endurance limit for adhesive joints

The effect of cyclic stressing on the strength of single lap adhesive joints has been studied and a considerable reduction in strength observed when the maximum stress exceeds about 40% of the ultimate tensile strength, but whether or not a true endurance limit exists is not proven. Fallacies are shown in some of the techniques which have been proposed for studying the fatigue behaviour of adhesive joints.     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.     

Determination of instantaneous corrosion rates and runoff rates of copper from naturally patinated copper during continuous rain events

Instantaneous corrosion rates of naturally patinated copper of varying age (16 months, 138 and 145 years) have been determined during continuous rain events in the laboratory with electrochemical impedance spectroscopy using a two-electrode cell. The two-electrode cell was found to yield the same information in bulk rainwater as a conventional three-electrode cell.Relatively constant corrosion rates, between 0.2 and 0.6 μm/y, were determined for samples having a two-layer structure with an inner brownish layer of cuprous oxide and an outer greenish layer of basic copper salts (138, 145 years). Samples with cuprous oxide as the dominating phase of the patina (16 months) showed higher and somewhat increasing corrosion rates during a rain event (from 0.6 to 1.2 μm/y). During a continuous rain event, corrosion rates were found to be approximately 10 (brownish patina) and 25 times (greenish patina) lower than corresponding instantaneous runoff rates. The first flush phenomena of the runoff process, with an increased concentration during first flush and a relatively constant concentration during steady state, was indirectly seen as an increase in solution conductivity during the first rain volume followed by relative constant value. The contribution of the concentration in the first flush to the total annual runoff rate was significant for panels having a greenish layer (138, 145 years) whereas it was negligible for panels having a brownish layer (16 months).     

Effect of powder painting procedures on the filiform corrosion of aluminium profiles

In this work, the filiform corrosion behaviour of powder painted aluminium profiles was studied, and the coating barrier properties together with adhesion to the substrate were analysed. Samples coated with a traditional painting procedure (one powder layer application followed by curing), and other samples coated using a special cycle to obtain wood grain effect were compared using accelerated filiform corrosion tests. Moreover, in order to better understand the degradation mechanisms of painted metal substrates, thermal stresses were applied to accelerate the natural weathering. The effects of the thermal aging were analysed by electrochemical impedance spectroscopy.     

Posttraumatic stress in children and adolescents exposed to family violence: I. Overview and issues.

Exposure to child physical abuse and parents' domestic violence can subject youth to pervasive traumatic stress and can lead to posttraumatic stress disorder (PTSD). This article presents evolving conceptualizations in the burgeoning field of trauma related to family violence exposure and describes how the often repeating and ongoing nature of family violence exposure can complicate a PTSD diagnosis. In addition, recent literature indicates that children exposed to family violence may experience problems in multiple domains of functioning and may meet criteria for multiple disorders in addition to PTSD. Considerations salient to the recognition of traumatic stress in this population and that inform assessment and treatment planning are presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

纤维素的辐射裂解及其化学性质

纤维素经高能射线辐照,能产生一系列的化学和物理性质的变化。本文报道在不同剂量的~(60)Coγ射线辐照下,稻草中的水溶性糖、易水解糖、难水解糖,以及氨基酸、蛋白质等物质的化学变化;用辐射与加泡涨剂相结合的方法处理稻草,可以降低剂量、提高效应。     

Internal-corrosion inhibitors for pipelines carrying deaerated heating water

The effect of internal-corrosion inhibitors on heating-system pipelines is investigated. Tests were conducted on a testing device for polarization measurements under conditions corresponding to the Rostov Heat-Supply System. The concentration of OEDP-zinc, which provides a high degree of protection from general corrosion, is determined. The reagent has been successfully incorporated into the Rostov No. 2 TPP. __________ Translated from élektricheskie Stantsii, No. 7, July 2007, pp. 37–43.     

Internal-corrosion inhibitors for pipelines in heat-supply systems carrying water with a high oxygen content

The reliability of heat-supply systems is determined primarily by internal corrosion of the pipelines. The concentration of oxygen in the water exerts a major influence on the corrosion. In systems with a standard oxygen content, OéDF-Zn is a highly effective corrosion inhibitor. However, there are systems in which the quality of deaeration of the make-up water of the heat-supply system is low (or deaeration is nonexistent), and the concentration of oxygen is considerably above the standard value. Classed among these systems, for example, are the HWS systems, which are incorporated into closed heat-supply systems. The oxygen concentration in these systems is analyzed to assess the situation. __________ Translated from élektricheskie Stantsii, No. 6, June 2007, pp. 35–39.