Globally asymptotic stabilization for nonlinear time-delay systems with ISS inverse dynamics

The output feedback stabilization is considered for a class of nonlinear time-delay systems with inverse dynamics in this paper.An appropriate state observer is constructed for the unmeasurable system states in order to realize the control objective.By adopting the backstepping and Lyapunov-Krasovskii functional methods,a systematic design procedure for a memoryless output feedback control law is presented.It is shown that the designed controller can make the closed-loop system globally asymptotically stable while keeping all signals bounded.An illustrative example is discussed to show the effectiveness of the proposed control strategy.     

Observer‐based Reliable Control for Discrete Time Systems: An Average Dwell Time Approach

This paper deals with the problem of reliable control for discrete time systems with actuator failures. The actuator is assumed to fail occasionally and can recover over a time interval. During the time of suffering failures, the considered closed‐loop system is assumed unstable. Using an average dwell time method and under the condition that the activation time ratio between the system without actuator failures and the system with actuator failures is not less than a specified constant, an observer‐based feedback controller is developed in terms of linear matrix inequalities such that the resulting closed‐loop system is exponentially stable. An example is included to demonstrate the effectiveness of the proposed approach.     

The induced generalized aggregation operators for intuitionistic fuzzy sets and their application in group decision making

In this paper, we present the induced generalized intuitionistic fuzzy ordered weighted averaging (I-GIFOWA) operator. It is a new aggregation operator that generalized the IFOWA operator, including all the characteristics of both the generalized IFOWA and the induced IFOWA operators. It provides a very general formulation that includes as special cases a wide range of aggregation operators for intuitionistic fuzzy information, including all the particular cases of the I-IFOWA operator, GIFOWA operator and the induced intuitionistic fuzzy ordered geometric (I-IFOWG) operator. We also present the induced generalized interval-valued intuitionistic fuzzy ordered weighted averaging (I-GIIFOWA) operator to accommodate the environment in which the given arguments are interval-valued intuitionistic fuzzy sets. Further, we develop procedures to apply them to solve group multiple attribute decision making problems with intuitionistic fuzzy or interval-valued intuitionistic fuzzy information. Finally, we present their application to show the effectiveness of the developed methods.     

A robust critical path in an environment with hybrid uncertainty

In this article, we consider the project critical path problem in an environment with hybrid uncertainty. In this environment, the duration of activities are considered as random fuzzy variables that have probability and fuzzy natures, simultaneously. To obtain a robust critical path with this kind of uncertainty a chance constraints programming model is used. This model is converted to a deterministic model in two stages. In the first stage, the uncertain model is converted to a model with interval parameters by alpha-cut method and distribution function concepts. In the second stage, the interval model is converted to a deterministic model by robust optimization and min-max regret criterion and ultimately a genetic algorithm with a proposed exact algorithm are applied to solve the final model. Finally, some numerical examples are given to show the efficiency of the solution procedure.     

DTA measurements of normal-incommensurate phase transition in (NH4)2ZnCl4 and K2ZnCl4 crystals

Differential thermal analysis (DTA) was applied to determine the changes in enthalpy and entropy of (NH₄)₂ZnCl₄ and K₂ZnCl₄ crystals at their phase transition from the orthorhombic normal phase to the incommensurate phase. The temperature of this transition, T _i , is 406 K for (NH₄)₂ZnCl₄ and 555 K for K₂ZnCl₄ and the entropy changes (S/R) are 0.053 and 0.035, respectively. The low value obtained for S/R is characteristic of incommensurate phase transitions. The results were compared with the data reported for other crystals of the A₂BX₄ family. Thermal properties of the crystals of the A₂ZnCl₄ subgroup were found to the correlated with the length of A-Cl bonds.     

Finite-size effects in surface tension: Thermodynamics and the Gaussian interface model

It has been suggested by Kayser that finite-size effects associated with capillary waves might play a significant role in some surface tension measurements; for capillary rise between plates a distance D apart, an effect varying as 1/D and apparently observable in measurements, was proposed. In reconsidering this problem, one must analyze the thermodynamics of finite-size corrections to surface tension. In particular, one sees that capillary rise between plates does not measure the interfacial free energy density but, rather, a derivative of the interfacial free energy with respect to a system dimension. The quantity needed to draw definite conclusions, the finite-size residual free energy, can be calculated within the harmonic or Gaussian capillary wave model in d spatial dimensions with the aid of Poisson summation techniques and should yield the correct leading asymptotic behavior. For d=3 and experimentally relevant parameter values, the results are independent of the short-wavelength cutoff needed in the model and can be checked against the theory of conformai covariance at two-dimensional critical points. It is found that the finite-size effects in capillary-rise measurements of surface tension vary as 1/D ² (with a universal coefficient) but are too small to be seen in current experiments.Invited paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

The volume integral method of eddy-current modeling: Verification

The volume integral method of eddy-current modeling represents a flaw in metal as a set of electric dipoles located within volume elements or cells defining the flaw volume. Given this dipole distribution, impedance changes may be computed. The electric field of the dipole distribution is determined by an integral equation relating, by means of the electric field Green's tensor, the electric field due to the source to the total electric field in the flaw. The integral equation is solved by assuming that the total electric field is constant in each volume element, resulting in a matrix equation. The method has been programmed for use on a microcomputer. The method and computer program are verified using the analytical solution for a small spherical flaw and three sets of measured impedance data, measured by air-core coils along profiles overlying both surface-breaking and buried simulated flaws of known dimensions. Operating frequencies ranged between 900 and 4000 Hz. Generally agreement is good at lower frequencies ( 1000 Hz). At higher frequencies ( 4000 Hz), the agreement is not as good. This is thought to be due to the inability of the constant electric field approximation to model the steep electric field gradients present in the host metal at high frequency. The results are also sensitive to the method of computation of the electric field due to the source. Some improvements can and should be made to the method.     

A generalized equation for surface tension from the triple point to the critical point

A three-parameter generalized equation is proposed for surface tension from the triple point to the critical point. This equation not only fits the data well but also is good for interpolation between the normal boiling point and the critical point. This equation is also good for extrapolation to the triple point. This equation has been tested using the surface tension of water from the triple point to the critical point. The constants of this equation obtained using orthobaric surface tensions are given for a number of compounds. The isobaric surface tensions determined at a pressure of 1 atm do not differ significantly from the orthobaric surface tensions. Such data also have been used in obtaining equations from the triple to the critical point.Nomenclature T _c Critical temperature, K - T _t Triple point, K - T _m Melting point, K - T _r Reduced temperature, K - X (T _c-T)/T _c - Surface tension, dyne · cm^–1;10^–3N · m^–1 - _m Surface tension at the melting point - _f Surface tension at T _r=0.9 - _t Surface tension at the triple point - Relative deviation 100[ _obsd– _calcd]/ _obsd - Standard deviation [( _obsd– _calcd)²/(No. points—No. parameters)]^0.5     

A relation between interfacial and bulk properties along the saturation curve

A liquid-vapor interface in thermal equilibrium was considered, where the pressure tensor depends upon the density (z) and the position z. The surface tension coefficient results are parametrized with the bulk compressibility, liquid-vapor density difference, and interfacial width along the saturation curve. Previous results at the triple and critical points reported by other investigators are verified. Also included is a plot of the computed results using the parametric equation and experimental data for different substances.     

经食道心房调搏的放射性核素心血管造影

本文应用反符合电路剔除调搏脉冲干扰的方法,制成经食道心房调搏心电心音门电路触发装置,用于经食道心房调搏的核素心血管造影。参考Tzivoni标准,当逐级增加调搏心率至140次/min或亚极量心率后发现:冠心病人有调搏后EF降低;急性心肌梗塞病人EF减低更为明显,并呈室壁反向运动。因此,心房调搏核素心血管造影有助于冠心病,特别是心肌梗塞的诊断。