系列尼古丁PVC膜选择性电极的研制

以尼古丁为研究对象 ,研制了一系列含有不同增塑剂 (苯二甲酸二辛酯、苯二甲酸二壬酯和癸二酸二辛酯 )和电活性物质 (尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物和尼古丁 雷氏盐缔合物 )的PVC膜电极。所有的 8支电极均对尼古丁盐酸溶液有Nernst响应。所制备的电极中 ,以尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物或尼古丁 雷氏盐缔合物为活性物的电极 ,其线性范围达到 10 - 4～ 10 - 1 mol/L ,以尼古丁 硅钨酸缔合物为活性物的电极线性范围达到 10 - 5～ 10 - 1 mol/L。电极响应的均匀性还在进一步的研究和改善中     

PD雷达欺骗干扰方法浅析

概要介绍了PD雷达的抗干扰性能及其特点．并主要对PD雷达的欺骗干扰方法进行了一定的讨论。     

Influence of process variables on the drying of potato slices

Investigation of the effects of varying air velocity, slice thickness, and pre-treatment with sodium chloride solutions and surface active agents on drying potato slices indicated that the drying occurred entirely in the falling rate period and was controlled by the mechanism of liquid diffusion. The rate of drying, and therefore the diffusion coefficients, increased with the addition of sodium chloride and surface active agents. Diffusion coefficients were also influenced by air velocity and slice thickness, suggesting that the rate of drying of potato slices is controlled by a combination of internal and external resistances.     

一种基于自然数线性八叉树的优化构造算法

本文提出了一种基于自然数线性八叉树的优化构造算法。该算法以活动结点表为中间辅助结构，在图像输入过程中直接生成基于Ｎ码的八叉树叶结点．与常规构造算法相比，新提出的优化构造算法省去了Ｎ码的计算及合并过程，从而具有较高的时空效率．     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

砂岩储层渗透率表征方法探讨

渗透率是反映储层渗流能力的重要参数，目前对于单一储层的渗透率表征方法，通常是在岩心分析渗透率或测井解释渗透率的基础上进行厚度加权算术平均。这种方法对于均质的储层来说是适用的，但对于非均质严重的储层，不能准确反映该储层的实际渗流能力。本文提出一种应用可动流体体积权衡表征渗透率的方法，经实际资料验证，能较好地反映储层的实际渗透能力。     

Simulation-based sequential analysis of Markov switching stochastic volatility models

We propose a simulation-based algorithm for inference in stochastic volatility models with possible regime switching in which the regime state is governed by a first-order Markov process. Using auxiliary particle filters we developed a strategy to sequentially learn about states and parameters of the model. The methodology is tested against a synthetic time series and validated with a real financial time series: the IBOVESPA stock index (São Paulo Stock Exchange).     

A novel direct aerodynamically assisted threading methodology for generating biologically viable microthreads encapsulating living primary cells

In a recent discovery, coaxial electrospinning was explored to encapsulate living organisms within a continuous bio‐polymeric microthread from which active biological scaffolds were fabricated (Townsend‐Nicholson and Jayasinghe, Biomacromolecules 2006, 7, 3364). The cells were demonstrated to have gone through all expected cellular activity without their viability being compromised. These biologically active threads and scaffolds have direct and tremendous applicability from regenerative to therapeutic medicine. Currently these post‐processed cells as composite threads and scaffolds are being investigated in‐depth at a cellular level to establish if the processing methodology has any affect on the cellular make‐up. We now demonstrate a competing non‐electric field driven approach for fabricating composite threads and scaffolds influenced only by a differential pressure. We refer to this novel composite thread to scaffold fabrication methodology as coaxial aerodynamically assisted bio‐threading (CAABT). Our investigations firstly, demonstrate that this technique can process handle living organisms without biologically perturbing them in anyway. Secondly the process is elucidated as possessing the ability to form composite active threads from which biologically viable scaffolds are formed. Finally our study employs florescent activated cell sorting (FACScan), a method by which the cellular dynamics and viability are quantified on control and threaded cellular samples at two prescribed time points. In parallel with FACScan, optical comparison of cellular morphology at three time points within a period of three weeks is carried out to photographically observe any changes in the post‐processed cellular phenotype. Our developmental investigations into this novel aerodynamically assisted threading methodology has unearthed a unique biomicrofabrication approach, which joins cell electrospinning in the cell threading to scaffold fabrication endeavor. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008