TPC方法研究催化剂热分解动力学

设计了ＴＰＣ方法研究催化剂前驱体的热分解；对ＴＰＣ方法求取催化剂的热分解动力学方程进行了理论推导；采用ＴＰＣ方法试验求得了Ｎｉ－Ｚｎ／Ｃ催化剂的热分解动力学参数。试验表明，ＴＰＣ方法能直观、灵敏、方便地反映催化剂活性组份前驱体的本征热分解。     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

Thermal Monitoring of Self-Checking Systems

With the increasing power density in integrated systems resulting from scaling down, the occurrence of field failures due to overheating has considerably increased. Faulty operation can be prevented by on-line temperature monitoring. This paper deals with questions of on-line temperature monitoring in safety-critical systems. First the possible temperature sensors are reviewed and basic principles of self-checking systems including such sensors are detailed, then a new temperature sensor cell with extremely good parameters designed especially for DfTT applications is presented. The basic questions of integrating thermal sensors into self-checking systems are also discussed.     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

Mechanical and thermal properties of poly(ethylene terephthalate) fibers crosslinked with disulfonyl azides

A novel method for the crosslinking of poly(ethylene terephthalate) fibers is described using 1,6‐hexanedisulfonyl azide, 1,3‐benzenedisulfonyl azide, and 2,6‐naphthalenedisulfonyl azide. The azides are diffused into poly(ethylene terephthalate) fibers (Dacron) from perchloroethylene solution, and the fibers are heat treated to bring about decomposition of the sulfonyl azide and give rise to crosslinking. A study is made of the mechanical and thermal properties of the resultant fibers, which are changed considerably in comparison to the untreated fiber. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1517–1527, 2002     

双马来酰亚胺基体树脂的改性研究

本文报道用改性物B改善双马来酰亚胺/二胺预聚物溶解性的实验研究.结果表明,改性后的双马来酰亚胺/二胺基体树脂在低沸点、低毒性溶剂如丙酮中具有良好的溶解性,并且有足够的均相期,为湿法制作预浸料创造了有利条件.同时对树脂的固化反应、耐热稳定性及其复合材料在高温条件下(150℃、200℃)的层间剪切性能进行了研究.     

Phase-change thermal energy storage using spherical capsules: performance of a test plant

The aim of this paper is the study of an industrial process of energy storage usable for air conditioning or refrigeration, investigating a test plant which is a tank with a reduced size, filled with randomly dispersed commercial nodules, placed in a refrigeration loop. The nodules are spherical capsules in which phase change materials (PCM) are encapsulated. This test plant permits the study at length of the behaviour of the tank with, in particular, the charge mode taking into account the undercooling and the discharge mode. A simulation program that considers aspects of both the surrounding heat transfer fluid and the phase-change material packed inside the nodules is developed here in the cases of the charge and the discharge processes. The simulation results are then compared with experimental observations.     

Numerical simulation and error analysis for thermal diffusivity measurements using laser-induced thermal grating technique

The laser-induced thermal grating technique has been used to determine the thermal diffusivity of liquids and liquid mixtures. But the dynamic behaviour of the transient thermal grating has not yet been thoroughly investigated, and the systematic errors, which result from the departures from one-dimensional heat conduction, have scarcely been studied quantitatively. In this paper. a three-dimensional numerical simulation and results of the transient thermal grating technique are presented, which enable a good understanding of the dynamic behaviour of the transient thermal grating. The results of this simulation are important for the proper design of the experimental setup to keep the systematic errors for the diffusivity measurement small. Based on the simulation method, the systematic errors were analyzed quantitatively. Here, the following effects were studied: (I) sample thickness, (2) intersection angle, (3) absorption, (4) Gaussian beam intensity distribution and focusing of heating laser beam, and (5) heating pulse duration and laser power. This error analysis makes it possible to specify the criteria for optimum measuring conditions, to correct the measured thermal-diffusivity values for systematic errors, and to estimate the accuracy of the measurements.     

百色盆地林蓬浅层稠油油藏热采开发的可行性研究

百色盆地林蓬油藏为一浅、薄、低产、低渗的普通稠油构造油藏。通过对油藏特征、原油热物性、热采数值模拟初步分析及热米开发经济效益的初步评价，认为林蓬油藏利用我国现有的热采技术投入开发具有可行性，并提出了具体实施方案和工作意见．