Synthesis of unsaturated polyesters of increased solubility in styrene

The present study presents the synthesis of unsaturated polyester resins using only one glycol i.e., ethylene glycol. Polyesters of inorganic solubility in styrene were prepared. Properties of the resins in the noncrosslinked state in the process of crosslinking and after curing were studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3143–3150, 2006     

裂缝各向异性介质中P-SV转换波正演模拟

裂缝介质正演是研究裂缝性油藏的各向异性、裂缝检测方法、裂缝AVO反演等的前提。在裂缝方位各向异性(EDA)介质模型的基础上，重点研究了纵波震源激发的地震波所产生P-SV波的有限差分正演模拟方法。从各向异性单斜对称系统的刚性矩阵推导出的波动方程，可以满足EDA介质模型不同方位角入射的二维差分模拟要求。在有限差分模拟中，采用了普通的Kelly差分格式、二阶各向异性吸收边界条件和一般的纵波震源的解析形式，并应用修正的通量传输校(FCT)方法来消除频散。同时，对纵波震源的解析式进行了技术处理，取得了较好的效果。     

3-D MCM封装技术及其应用

介绍了超大规模集成电路（VLSI）用的3-D MCM封装技术的最新发展，重点介绍了3-D MCM封装垂直互连工艺，分析了3-D MCM封装技术的硅效率、复杂程度、热处理、互连密度、系统功率与速度等问题，并对3-D MCM封装的应用作了简要说明。     

一种新型智能光纤传感器的研制与应用

光纤传感技术是一种新型的传感技术，目前已受到国内外广泛重视而得到高速发展。光纤液位变送器具有高精度、高可靠性，不受电磁干扰等优点，特别是在防爆要求非常高的油气集输领域，它的无电检测、光信号传输完全消除了不安全的因素，为易燃易爆场所提供了安全可靠的检测仪器。     

Heat resistance of Escherichia coli O157:H7 in cook‐in‐bag ground beef as affected by pH and acidulant†

Summary The heat resistance of a four‐strain mixture of Escherichia coli O157:H7 was tested. The temperature range was 55–62.5 °C and the substrate was beef at pH 4.5 or 5.5, adjusted with either acetic or lactic acid. Inoculated meat, packaged in bags, was completely immersed in a circulating water bath and cooked to an internal temperature of 55, 58, 60, or 62.5 °C in 1 h, and then held for pre‐determined lengths of time. The surviving cell population was enumerated by spiral plating meat samples on tryptic soy agar overlaid with Sorbitol MacConkey agar. Regardless of the acidulant used to modify the pH, the D ‐values at all temperatures were significantly lower (P < 0.05) in ground beef at pH 4.5 as compared with the beef at pH 5.5. At the same pH levels, acetic acid rendered E. coli O157:H7 more sensitive to the lethal effect of heat. The analysis of covariance showed evidence of a significant acidulant and pH interaction on the slopes of the survivor curves at 55 °C. Based on the thermal‐death–time values, contaminated ground beef (pH 5.5/lactic acid) should be heated to an internal temperature of 55 °C for at least 116.3 min and beef (pH 4.5/acetic acid) for 64.8 min to achieve a 4‐log reduction of the pathogen. The heating time at 62.5 °C, to achieve the same level of reduction, was 4.4 and 2.6 min, respectively. Thermal‐death–time values from this study will assist the retail food processors in designing acceptance limits on critical control points that ensure safety of beef originally contaminated with E. coli O157:H7.     

The Effect of Structural Defects on the Thermal Conductivity of ZnS, ZnSe, and CdTe Polycrystals

ZnS, ZnSe, and CdTe polycrystals are experimentally investigated. Mechanisms are treated which restrict the thermal conductivity in samples prepared by recrystallization pressing and by deposition from the vapor phase and subjected to additional strain. Anomalies are observed on the temperature dependences of the thermal resistance of investigated samples, which are due to the special features of their phonon spectra and to the variation of the contribution made by longitudinal and transverse phonon branches to the heat transfer in the Debye temperature region and higher.     

The Transport Properties of Hot Electrons in a Xenon/Methane Mixture

The results are given of numerical solution of the Boltzmann equation in a binomial approximation in view of elastic and inelastic electron collisions in Xe+CH₄ mixtures and in pure methane. The electron energy distribution functions obtained are used to calculate the electron transport coefficients for E/N values of up to several Townsends, i.e., the drift velocity, mobility, average and characteristic energies, diffusion coefficient. The results of calculation for pure methane fit the available experimental data. A similarity rule is found for the electron transport coefficients in a Xe+CH₄ mixture with different concentrations of methane molecules, which enables one to determine the values of transport coefficients in a mixture with a minor (less than 30 percents) methane content.     

金属基复合材料的热残余应力力学模型研究进展

金属基复合材料在高温制备的冷却过程中或热处理过程中由于组分间热膨胀系数（CTEs）的差异会产生较大的热残余应力，热残余应力对复合材料的宏观性能有着重要的影响。本文综述了分析金属基复合材料热残余应力的有限元模型和解析模型等理论模型，并指出有待深入研究的问题。     

Role of Ponded Turbidity Currents in Reservoir Trap Efficiency

The capacity to store water in a reservoir declines as it traps sediment. A river entering a reservoir forms a prograding delta. Coarse sediment (e.g., sand) deposits in the fluvial topset and avalanching foreset of the delta, and is typically trapped with an efficiency near 100%. The trap efficiency of fine sediment (e.g., mud), on the other hand, may be below 100%, because some of this sediment may pass out of the reservoir without settling out. Here, a model of trap efficiency of mud is developed in terms of the mechanics of a turbidity current that plunges on the foreset. The dam causes a sustained turbidity current to reflect and form a muddy pond bounded upstream by a hydraulic jump. If the interface of this muddy pond rises above any vent or overflow point at the dam, the trap efficiency of mud drops below 100%. A model of the coevolution of topset, foreset, and bottomset in a reservoir that captures the dynamics of the internal muddy pond is presented. Numerical implementation, comparison against an experiment, and application to a field-scale case provide the basis for a physical understanding of the processes that determine reservoir trap efficiency.