砌筑砂浆达不到设计要求的事故原因分析

从砂浆的配合比、和易性、原材料等对砌筑砂浆达不到设计要求的事故原因进行了分析。     

Study of miscibility enhancement in poly(styrene‐co‐4‐vinylphenol)/poly(ethylene oxide) blends by the spin labelling method

The electron spin resonance (ESR) spectra of end‐group spin labelled poly(ethylene oxide) (SLPEO) using 2,2,6,6‐tetramethyl‐piperdine‐1‐oxyl nitroxide and its blends with poly(styrene‐co‐4‐vinylphenol) (STVPhs) of different hydroxyl contents were recorded over a wide temperature range. For a blend of SLPEO and pure polystyrene (PS), the ESR spectrum was composed of a single motion component, indicating that PS was immiscible with PEO. For blends composed of SLPEO and different‐hydroxyl‐content STVPhs, two spectral components with different motion rates were observed over a certain temperature range. The difference between the motion rates should be attributed to micro‐heterogeneity in the blends, with the faster rate corresponding to a nitroxide radical motion trapped in the PEO‐rich domain and the slower rate corresponding to a nitroxide radical motion trapped in the STVPh‐rich domain. Variations in the values of a number of the ESR parameters (T_a, T_d and T_50G) and the apparent activation energy (E_a) with hydroxyl content in the blends indicated that the miscibility of the blends increased with increasing hydrogen‐bonding density due to specific interactions between the hydroxyl groups in STVPh and the ether oxygens in PEO. Copyright © 2004 Society of Chemical Industry     

基于PTFE的PCB的多层层压方法

介绍了采用不同材料类型的粘结膜、半固化片、所需设备和粘结材料,用于生产低到高层数的PTFE多层板的情况。     

硬质合金与铁基复合材料热等静压扩散连接

以烧结结态硬质合金和粉末态铁基复合材料为连接对象，研究了两种材料的热等静压扩攻连接工艺，获得了直接连接接头和加镍作中间过渡层的间接连接接头，考察了接头的结合界面形貌，界面的元素扩散和界面结合强度。     

转炉溅渣层与镁碳砖炉衬的结合机理

通过对生产现场带有溅渣层的转炉炉衬残砖和试验室小型坩埚溅渣试验结果进行矿相显微结构分析、研究，确定了溅渣层的矿相组成、溅渣层与ＭｇＯ－Ｃ砖结合区域的矿相结构及坩埚溅渣层自上而下的矿相分布规律，并根据矿相结构分析中观察到的烧结层、结合层和溅渣层３个区域，提出了溅渣层与镁碳砖炉衬的结合机理为化学结合、机械镶嵌与化学烧结结合及冷凝结合３种形式。     

In Situ FTIR Study of the Formation of an Organosilane Layer at the Silica/Solution Interface

An FTIR experiment especially designed to study the growth of an organosilane layer at the interface between a solution and a flat silica surface is presented. High sensitivity is achieved by using the attenuated total reflection (ATR) technique in a liquid flow cell. The ATR crystal, either silicon or germanium, is covered with a very thin silica layer. Chemical reactions of a mono-and a di-hydrolyzable silane with the silica substrate have been investigated. The grafting of a submonolayer of the first reagent has been monitored by following the C-H and SiO-H vibrations. The density of grafted molecules has been estimated and information on the nature of the chemical bonding has been achieved. Evidence for the chain-polymerization of the dihydrolyzable silane at the substrate/solution interface has been inferred from the appearance of a Si-O-Si absorption band.     

钻井工程固井胶结界面研究现状

固井质量问题在石油勘探开发中备受关注，对特殊工艺井钻井、油水井开采寿命和勘探开发效益有直接的影响。对固井胶结界面的研究是从根本上提高固井质量的一项基础性研究工作。为了推动固井胶结界面研究工作的开展，分析了国内外近年来有关固井界面研究的文献，阐述了开展固井胶结界面基础研究工作的意义，着重分析了这一研究领域目前所采用的研究方法，以及提高固井界面胶结强度的主要途径。在分析文献的基础上，提出今后深入开展固井界面研究工作的重点是：1）继续完善研究方法；2）重视动态研究；3）从胶结界面的微观结构和钻井工程整体系统的角度开展研究工作；4）注重改善胶结界面水化产物的微观结构和钻井工作液之间的协调增强作用。     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

高效焊管新工艺——金属管液相扩散焊

采用镍基非晶态箔带作中间层,在加压情况下(约几MPa)使之熔化、保温,进行了钢管瞬间液相 (TLP)扩散焊试验。结果表明,可以获得无夹杂的致密界面;接头过渡区的最终厚度显著变薄;焊后中间层主组元由焊前的Ni变为Fe;容易获得性能合格接头。值得指出的是,焊接时间约为3min,远低于手弧焊所需时间。     

陶瓷/金属钎焊与扩散连接的研究现状

工程陶瓷由于具有优异的综合性能,在许多领域得到广泛应用,但其加工性能差,通常需要与金属组成复合结构.实现陶瓷与金属之间的可靠连接是推进陶瓷材料应用的关键,钎焊和扩散连接被认为是陶瓷/金属连接中较为适合的方法.文中对近年来国内外陶瓷/金属钎焊和扩散连接技术领域的研究现状进行了综述,认为活性金属钎焊和部分瞬间液相连接发展比较成熟,部分瞬间液相连接充分结合了活性钎焊和固相扩散连接两者的优点,将成为未来陶瓷/金属连接的发展方向.