用各向异性介质构造的一维光子晶体的特性分析

本文根据单轴晶体的传输矩阵，研究了一种由各向异性介质周期排列构成的一维光子晶体，分析了在不同入射角度和折射率条件下，该周期结构的反射和偏振的光学特性。分析结果表明，各向异性介质在折射率比值较大或与高折射率同性介绍结合使用，可获得较宽的禁带，并可实现在可见光范围内的全偏振全角度反射。     

稀土锆莫来石耐火材料的显微结构研究

本文运用ＸＲＤ、ＳＥＭ等方法对稀土锆莫来石耐火材料的显微结构，物相变化，以及稀土的作用机制进行了研究。     

Non-contact methods of measuring moisture concentration in external layers of building partitions: III—Water vapour condensation on the cementitious surfaces

This paper presents the results of the larger study into a potential application of laser radiation for the detection of phase transition processes in low temperatures occurring on the surface layers of cementitious materials. An attempt was made to identify relationships between the environmental conditions—temperature and air humidity, and the selected parameters of the reflected light. Onset of the condensation process and formation of water microdrops on the surface of the material leads to the phase displacement of individual laser rays, which are represented by different speckle images.

Although the analysis of parameters of the reflected light are very difficult in the case of porous materials because of highly developed roughness of the surface structure it has been proved that a dynamic study of the phase transition phenomena can be successfully carried out without mechanical intervention.     

Recent developments of high-performance NEOMAX magnets

For further improvement in achieving extremely high magnetic properties of Nd- Fe- B sintered magnets, extensive investigation has been done to densify the magnet up to the theoretical value, to increase the volume fraction of the Nd ₂Fe₁₄B matrix phase, and to achieve a high degree of alignment. By controlling chemical composition and the amount of constituent phases,improving particle size distribution, and adopting the isostatic pressing method to get better alignment of fine particles, we have succeeded in obtaining a high-performance magnet having residual flux density (B_r) of 1.495 T (14.95 kG), maximum energy product [(BH)_max] of 431 kj/m³ (54.2 MGOe), and intrinsic coercivity (iH_c) of 845 kA/m (10.62 kOe).     

LaxBa1—xCoO3系导电陶瓷的显微结构与电特性关系的研究

通过Ｘ射线衍射分析和扫描电镜观察，得到了ＬａｘＢａ１－ｘＣｏＯ３系导电陶瓷的显微结构，并发现当Ｘ从０到１变化时，相结构随之发生六方－立多－多相结构变化。在显微结构形态上，呈现出晶粒通道网络，室温电阻率与显微结构之间有明显的对应关系。     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

施加复合电磁搅拌对A357合金微观组织的影响

在半固态加工技术中，电磁搅拌是最早应用于制备非枝晶浆料的方法之一，同时也是半固态触变压铸技术最早获得工业应用的重要技术基础之一。采用自行开发的电磁搅拌器，研究了多种不同电磁搅拌方式在不同工艺条件下，单独施加或复合施加对A357合金微观组织的影响。试验结果表明：单一施加旋转感应电磁搅拌时，浆料径向组织很不均匀；单一施加无芯感应电磁搅拌。当搅拌电流较小时，径向组织也不均匀，增大电流，浆料质量有明显改善；采用（旋转感应＋无芯感应）复合电磁场进行复合电磁搅拌时，可在电流较小时获得满意的浆料质量。     

Development of ultra light magnesium-lithium alloys

Magnesium-lithium alloys are among the lowest density metallic materials. Addition of lithium, with a relative density of 0·53, in magnesium reduces the density of the alloy significantly. Furthermore, addition of nearly 11 wt.% lithium converts hexagonal close packed structure of pure magnesium to a body centered cubic lattice, markedly improving formability of the alloy. The development of these alloys, however, had been hampered due to the high reactivity of lithium and magnesium in the molten state and also, due to poor creep resistance and instability of mechanical properties at room temperature. In an attempt to indigenize these ultra light alloys for possible applications in Indian satellite programme, detailed research work was initiated in DMRL. The difficulties associated with producing sound cast ingots have been overcome by controlling melting and casting parameters of these alloys. Extensive work has been done on structure-property correlation of alloys with varying lithium content and minor alloying additions. Based on these work, advanced magnesium-lithium alloys have been developed with improved tensile properties, room temperature stability and creep resistance. Wrought products (plates/sheets) of magnesium-lithium alloy have been supplied to ISAC, Bangalore and are being used in their INSAT-2 programme. This paper describes the systematic studies carried out in the laboratory to indigenize these ultra light alloys.     

反偏移法三维波动方程正演

三维地震资料的处理与解释往往都需要三维正演模型给予验证，以得到准确的处理、解释结果。本文提出的三维正演方法是一种偏移算法的逆运算方法－有限差分反偏移法。这一算法具有算法简单、运算量小及深度方向分辨率高的特点，是一种快速、高精度的正演算法。反偏移法虽是偏移算法的逆运算法，却出现常规偏移算法中所没有的很多问题。为此，本文进行了三种不同反偏移方法试验，并采用了一种新的浮动坐标变换，使正演结果精度得到很大     

Non-contact methods of measuring moisture concentration in external layers of building partitions II—Monitoring of the water vapour condensation on porous surfaces

This paper present the results of the investigation into a potential application of laser radiation for the detection of phase transition processes occurring on the surface layers of porous materials. An attempt was made to discuss in the approximation equations, the relationships between coefficients of the reflected light, the temperature and humidity of the surrounding environment. Laser light reflected from the porous surface carries information about the roughness of the structure. The presence of water microdrop on the surface of the porous material, as a result of condensation and thus a phase transition, leads to the phase displacement of individual rays, which is represented by different images. Therefore, a comprehensive analysis of the reflected light parameters allows a dynamic study of the phase transition phenomena without mechanical intervention.