非透视3点问题的解析解

由于在机器人导航等领域新的图像装置不符合透视规则,无法运用传统的透视位置估计方法,采用吴氏零点分解方法,给出非透视3点问题的解析解.利用新图像装置的几何条件,建立了非透视3点方程系统.     

Evolution of grain structure in thin film reactions

In this paper, we examine, both experimentally and theoretically, the kinetics of formation and microstructure of product phases in thin film reactions, using the Nb/Al and Ti/Al systems as our prototypes. The results of calorimetry and microscopy studies are interpreted using simple kinetic and morphology models. In particular, the kinetic models employed here focus on the nucleation and growth components of the phase formation process and the morphology models provide a starting point for the classification of product grain structures. An erratum to this article is available at .     

一种探测二维电磁目标的新方法

电磁目标的探测对通信而言有着十分重要的意义。本文描述一种收敛迅速、结果准确、抗强随机噪声的探测二维电磁目标的新方法。首先从体等效原理出发得到一个积分方程组，此方程组可求解散射问题。随后，对此方程组求变分，变形后得到散射场变化与介电参数变化之间关系的矩阵方程，即反演方程。文中列举了几个例子，通过数值实验结果证明本法收敛速度快、反演精度高、适应复杂目标的能力强，能抗强随机噪声干扰     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

以YAG为添加剂的气压烧结氮化硅

本文以添加ＹＡＧ的反应烧结氮化硅（ＲＢＳＮ）为前驱体，采用气氛加压烧结的工艺，在０．５～９．０ＭＰａ氮气压力范围，研究了不同氮压对烧结体的密度、相组成、强度和显微结构的影响及其相互间的关系。研究表明，通过改变氮气压力能有效地调控材料的显微结构，材料的性能又受控于显微结构的变化。     

WC对Cu/WC_P复合材料性能及组织的影响

通过ＷＣ含量对ＷＣ／Ｃｕ复合材料性能的影响，确定了冷压－烧结法制备Ｃｕ／ＷＣ材料的适宜ＷＣ含量为１０ｖｏｌ％左右。并就ＷＣ对该材料组织和再结晶行为的影响进行了有益的探讨。     

Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

低合金高强度钢的微观组织和疲劳裂纹扩展行为

用透射电镜观察了３０ＣｒＭｎＳｉＮｉ２Ａ钢等温的微观组织，疲劳裂纹扩展行为、裂纹尖端塑性区和位错结构，结果表明，等温状态组织由马氏体和贝氏体组成。在一个奥氏体晶粒内一般存在四个板条领域、裂纹尖端的塑性区内存在主位错带，疲劳断裂的基本组织单元为板条晶或板条束。裂纹遇到板条束界时方向发生较大偏斜。     

变形温度和变形程度对Ti－31合金性能和组织的影响

通过高温和室温拉伸试验，研究了变形温度和变形程度对Ｔｉ－３１合金板材性能和组织的影响。结果表明，合金在７５０～８５０℃的温度下变形５％～２０％空冷后，其室温机械性能均能达到材料的技术指标要求。并发现了材料在９００℃的临界变形区。     

Polyspectral Analysis of Two-dimensional Mixed Processes and Coupled Harmonics

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｒａｄａｒ,ｓｏｎａｒ,ｇｅｏｐｈｙｓｉｃｓ,ｒａｄｉｏｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｍｅｄｉｃａｌｉｍａｇ ｉｎｇ ,ｔｈｅｐｒｏｂｌｅｍｏｆｔｗｏ ｄｉｍｅｎｓｉｏｎａｌｆｒｅｑｕｅｎｃｙｅｓｔｉ ｍａｔｉｏｎｈａｓｒｅｃｅｉｖｅｄａｌｏｔｏｆａｔｔｅｎｔｉｏｎｉｎｒｅｃｅｎｔｙｅａｒｓ.ＩｎｔｈｅｃａｓｅｏｆａｄｄｉｔｉｖｅｗｈｉｔｅＧａｕｓｓｉａｎｎｏｉｓｅ,ｎｕｍｅｒｏｕｓｍｅｔｈｏｄｓｓｕｃｈａｓＭＥＭＰ[1 ] ,ＭＵＳ…