复参数最大熵图像重建的剑桥算法

本文将正实参数的最大熵图像重建的剑桥算法推广到复参数，此算法能较好的地恢复复参数“图像”。文中还给出了此算法在逆散射成像中应用的计算机模拟实验结果。     

一种混沌信号去噪方法的研究

以Takens嵌入定理和影子定理为理论依据，提出一种能对混沌信号去噪的局部投影方法。该方法不需潜在动力学系统的先验知识，符合工程实用的要求。通过实验结果表明这种方法对混沌信号去噪很有效。     

非均匀有耗媒质部分参数的重建

在高频部分，通过用Ｗｅｎｔｚｅｌ—Ｋｒａｍｅｒｓ—Ｂｒｉｌｌｏｕｉｎ—Ｊｅｆｆｅｒｙｓ（ＷＫＢＪ）解作为内场近似，本文证明了有耗非均匀媒质的反射系数在复平面上的轨迹是个圆。根据不同入射角度、不同极化的高频反射系数圆的圆心与半径，可以重建出有耗媒质的部分关键参数。本文方法同时适用于已知复反射系数谱和仅知反射系数振幅情况。文中给出具体重建实例。     

骨组织工程PLGA/TCP复合材料的性能研究

骨组织工程的支架要求有与人骨在功能梯度上相一致的材料结构、几何结构和生理功能。PLGA／TCP复合材料具有适用于骨组织工程支架的综合性能。以快速成形技术低温沉积工艺的成形效果来评价材料的成形性能，以体外降解试验来评价材料的降解性能，以国家标准的方法来评价材料的细胞毒性，对PLGA和TCP不同配比下的性能进行了研究，发现TCP含量的增加有利于降低材料的细胞毒性，加快了材料的降解，但同时降低了材料的成形性能。从骨组织工程的临床应用来看，低的细胞毒性是需要首先得到保证的，成形性能则通过其他方式来改善。     

轮式工程机械轮边减速器优化模型与方法

论述了重构轮式工程机械轮边减速器优化设计数学模型的必要性,给出了精确化的目标函数,全面化和准确化的设计变量、基于并行设计的约束条件;介绍了对优化解适用性评价的方法和手段。巧妙地解决了优化解中离散变量的圆整问题,提供了基于MATLAB的求解反渐开线函数的M文件。     

γ射线对叶组织电阻变化的影响及动态分析

测试了水稻和烟草两种叶片经不同剂量的^60Co γ射线辐照处理后，组织电阻及离子外渗的动态变化情况。研究结果表明：当超过一定的剂量阈值后，随着辐照剂量的增加，两种植物的叶组织电阻均呈现先上升、后下降的变化规律；叶组织电阻的改变与离子外渗的变化趋势并不一致；用测量叶组织电阻的方法可以较灵敏地体现出植物对γ射线的动态反应情况。运用电生理学的基础理论对上述生理现象的产生原因从机理上进行了分析与探讨。     

回转窑供电装置改造

本阐述了回转窑供电装置存在的缺陷，亦即改造过程和改造后的效果。     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite

The aims of this work were to investigate the conversion of a marine alga into hydroxyapatite (HA), and furthermore to design a composite bone tissue engineering scaffold comprising the synthesised HA within a porous bioresorbable polymer. The marine alga, Phymatolithon calcareum, which exhibits a calcium carbonate honeycomb structure, with a natural architecture of interconnecting permeable pores (microporosity 4–11 μm), provided the initial raw material for this study. The objective was to convert the alga into hydroxyapatite while maintaining its porous morphology using a sequential pyrolysis and chemical synthesis processes. Semi-quantitative XRD analysis of the post-hydrothermal material (pyrolised at 700–750 °C), indicated that the calcium phosphate (CaP) ceramic most likely consisted of a calcium carbonate macroporous lattice, with hydroxyapatite crystals on the surface of the macropores. Cell visibility (cytotoxicity) investigations of osteogenic cells were conducted on the CaP ceramic (i.e., the material post-hydrothermal analysis) which was found to be non-cytotoxic and displayed good biocompatibility when seeded with MG63 cells. Furthermore, a hot press scaffold fabrication technique was developed to produce a composite scaffold of CaP (derived from the marine alga) in a polycaprolactone (PCL) matrix. A salt leaching technique was further explored to introduce macroporosity to the structure (50–200 μm). Analysis indicated that the scaffold contained both micro/macroporosity and mechanical strength, considered necessary for bone tissue engineering applications.     

直接斜率波前复原算法的控制效果分析

建立自适应光学系统功率谱抑制函数的概念，分析了采用直接斜率波前复原算法的自适应当光学系统的控制效果，理论分析与６１单元自适应光学系统上的实验结果表明，直接斜率波前复原算法将导致控制效果下降。