低成本钛合金制备技术研究进展

为了降低钛合金的生产成本,美、俄、日、中等国家都在此领域进行了广泛的研究。对国际上新出现的以降低钛合金生产成本为目的的新冶金方法、新的低成本合金化钛合金和新的加工生产技术进行了综述。目前,国际上研究较为活跃的低成本钛冶炼新方法有FFC剑桥法、Armstrong工艺、EMR复合阳极工艺、SRI工艺、Idaho钛工艺及OS工艺。其中,以FFC剑桥法为代表的TiO2直接电解还原方法,最有希望成为替代传统Kroll工艺的新方法。     

Theoretical prediction and experimental realization of transition metal doped rutiles as diluted magnetic semiconductors

1. Introduction The new research area of ‘spintronics’ seeks to extend the properties and applications of electronic devices by making use of the spin of electrons in ad- dition to their charge. The development of magnetic semiconductors would be compatible with standard semiconductor technology and open new opportuni- ties. The so-called diluted magnetic semiconductor (DMS) is used to denote the no magnetic semicon- ductor doped with magnetic ions, and there have been considerable progress…     

Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

The deposition of titanium on a titanium alloy substrate is being examined for potential use as a surface treatment for medical prostheses. A Ti6Al4V alloy was coated with pure titanium by cold gas dynamic spraying. Coatings were deposited onto samples with two different surface preparation methods (as-received and grit-blasted). The fatigue life of the as-received and grit-blasted materials, both before and after coating, was measured with a rotating-bend fatigue rig. A 15% reduction in fatigue endurance limit was observed after application of the coating to the as-received substrate, but no significant reduction was observed on its application to the grit-blasted substrate. The reduction in fatigue endurance limit has been related to the substrate-coating interface properties, the elastic modulus, and the residual stress states. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference, (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, 2006.     

Na2SiO3—KOH—（NaPO3）6溶液中Ti6Al4V微弧氧化陶瓷膜研究

用非平衡交流微弧氧化法于Na2SiO3-KOH-(NaPO3)6溶液中在Ti6Al4V表面形成氧化物陶瓷膜。分别用扫描电镜、电子探针及X射线衍射研究了陶瓷膜的组织形貌、元素分布和相组成。相对致密均匀的膜层主要由TiO2(钙钛矿相及金红石相)及非晶相组成。厚约20μm的膜可分为3层：过渡层、致密层与疏松层。电解液所含元素Si，P进入到膜层中，表明电解液组元急烈参与微弧氧化反应，这为通过选择电解液来设计膜层的相组成进而对膜层进一步改性提供途径。     

TC2M2δ.5钛板冷热翻边成形极限及非对称化研究

TC2Mδ2.5mm钛板室温圆孔翻边成形试验结果表明,除翻边底孔尺寸小于极限值时在唇口边缘发生破裂的正常失效方式之外,冷翻边卸载后制件还出现凸缘平面翘曲、翻边孔口部椭圆化、唇口边缘高度不一致、壁厚分布不均匀等非对称化现象。600℃高温热翻边成形可以有效地提高成形极限,并消除了凸缘平面翘曲和口部椭圆化,但口部高度差以及壁厚不均等非对称化现象依然存在。本文在给出极限翻边系数的同时,对这种非轴对称化程度进行了定量描述,并给出了理论上的分析与解释。     

Reaction of Iradium with Metal Carbides in the Temperature Range of 1923 to 2400 K

The reactions of titanium carbide and hafnium carbide with iridium have been studied in thin film couples fabricated by vapor deposition processes. The reaction product layers after exposure in the temperature range of 1923 to 2400 K are dependent on the stoichiometry of the metal carbide layers and range from simple solid solutions to MIr_x compounds. The observed microstructures are predictable from available thermochemical data. The morphology of residual carbon in the reacted metal carbide-iridium product layer varies from interfacial deposits to uniform carbon dispersion and depends upon exposure temperature and metal carbide stoichiometry.     

Kinetics of the Initial Stage of Sintering from Shrinkage Data: Simultaneous Determination of Activation Energy and Kinetic Model from a Single Nonisothermal Experiment

A new method for the kinetic analysis of the initial stage of sintering for constant-heating-rate data has been proposed. Unlike all of the methods previously reported in the literature, this new method proposed here allows the simultaneous determination of the activation energy and the kinetic model from a single dilatometric curve recorded under a linear-heating-rate program. The proposed method has been tested with simulated sintering curves and experimental results have been obtained for the sintering of a rutile sample.     

云母钛珠光颜料的研制

对钛盐的沉析特性、云母精制、颜料制备进行了探讨。研制出云母－钛珠光颜料，即二氧化钛包覆云母，包覆层明显，珠光效果显著。     

稀土掺杂二氧化态光催化的研究进展

论述了半导体光催化反应机理，单一半导体光催化剂的光催化活性普遍不高，通过掺杂可以提高光催化活性，甚至在提高活性的同时扩展光谱响应范围，提高光的利用率。纳米TiO2是一种宽禁带半导体光催化剂，可用于有机污染物及无机污染物等方面的降解。     

氯产品清洁工艺的开发与推广

介绍了一些重要氯产品的值得开发与推广的清洁技术。这些氯产品包括环氧丙烷、氯化法钛白粉、3，3’-二氯联苯胺、氯化亚砜、氯化高聚物、氯乙酰氯、氯乙酸、氯甲苯、邻氯苯胺、氯蜡-70、三氯苯、三氯新。