A Multiscale/stabilized Formulation of the Incompressible Navier–Stokes Equations for Moving Boundary Flows and Fluid–structure Interaction

This paper presents a multiscale/stabilized finite element formulation for the incompressible Navier–Stokes equations written in an Arbitrary Lagrangian–Eulerian (ALE) frame to model flow problems that involve moving and deforming meshes. The new formulation is derived based on the variational multiscale method proposed by Hughes (Comput Methods Appl Mech Eng 127:387–401, 1995) and employed in Masud and Khurram in (Comput Methods Appl Mech Eng 193:1997–2018, 2006); Masud and Khurram in (Comput Methods Appl Mech Eng 195:1750–1777, 2006) to study advection dominated transport phenomena. A significant feature of the formulation is that the structure of the stabilization terms and the definition of the stabilization tensor appear naturally via the solution of the sub-grid scale problem. A mesh moving technique is integrated in this formulation to accommodate the motion and deformation of the computational grid, and to map the moving boundaries in a rational way. Some benchmark problems are shown, and simulations of an elastic beam undergoing large amplitude periodic oscillations in a viscous fluid domain are presented.     

纳米技术的杰作——纳米吸波材料

纳米吸波材料作为一种有着巨大发展前景的高技术功能材料，成为未来吸波材料的发展方向。本文从介绍纳米吸波材料的结构特征和吸波特点出发，说明了纳米吸波材料的独特吸波性能，同时对几种蚋米吸波材料进行了介绍。通过对现阶段国内外纳米吸波材料研究进展的评速与讨论，总结出其宽频化、复合化、低维化和智能化的未来发展趋势。     

核壳结构纳米Ni／Al复合粉末的制备

在含氟离子的水溶液中，采用Al粉直接置换还原Ni盐的方法，实现了纳米Ni在Al粉表面上的快速化学沉积，制备出核壳结构的Ni／Al复合粉末。探讨了反应的过程，利用SEM、XRD、BET等测试手段对复合粉末进行了微观测试和表征。结果表明：Al粉表面连续、均匀包覆了由晶粒大小约20．6nm的Ni纳米颗粒组成的壳层。     

Fabrication and design of multi-layered radar absorbing structures of MWNT-filled glass/epoxy plain-weave composites

The object of this study is to design radar absorbing structures (RAS) with load-bearing ability in the X-band. Glass/epoxy plain-weave composites of excellent specific stiffness and strength, containing multi-walled carbon nanotubes (MWNT) to induce dielectric loss, were fabricated. Observations of the microstructure and the permittivity of the composites confirmed that the fabrics are suitable for use as RASs. A genetic algorithm and a theory of the reflection/transmission of electromagnetic waves in a multi-layered RAS were applied to design an optimal RAS composed of MWNT-filled composites. The thickness per ply was observed to vary, depending on the number of plies and the MWNT contents. A fabrication process was proposed that considered the variation. The proposed process was in the fabrication of a designed RAS, and the theoretical and measured reflection losses of the RAS were found to be in good agreement.     

Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures

In this paper, sandwich structures for micro-EDM machines are optimized by using parametric study varying composite geometries and parameters like stacking sequence, thickness and rib geometry. The structures are composed of fibre reinforced composites for skin material and resin concrete and PVC foam (Closed cell, Divinycell) for core materials. Column structure was designed by a beam with cruciform rib and performance indices such as static bending stiffness (EI) and specific bending stiffness (EI/ρ) for dynamic stability are examined by controlling the thickness and stacking sequence of composites. For the machine tool bed, which usually has a plate shape, was designed to have high stiffness in two directions at the same time controlling stacking sequence and rib geometry; that is, rib thickness and number of ribs. The sensitivity of design parameters like rib thickness and composite skin thickness was examined and the optimal condition for high stiffness structure was suggested. Finite element analysis was also performed to verify the static and dynamic robustness of the machine structure. L-shaped joint for combining bed and column of the micro-EDM machine was proposed and fabricated using adhesive bonding. The dynamic performance such as damping characteristics was investigated by vibration tests. From the results optimal configuration and materials for high precision micro-EDM machines are proposed.     

Corrosion-resistant analogue of Hadfield steel

The concept of alloying austenitic steels with carbon + nitrogen is used for the development of a corrosion-resistant austenitic CrMn steel having an impact wear resistance close to that of the Hadfield steel. A higher stabilization of the austenitic phase by C + N, as compared to carbon or nitrogen alone, is substantiated by ab initio calculation of the electron structure, measurements of the concentration of free electrons and calculations of the phase equilibrium. Based on these results, the compositions (mass%) Cr18Mn18C0.34N0.61 and Cr18Mn18C0.49N0.58 were melted and tested along with Hadfield steel Mn12C1.2. Mechanical tests have shown that, as compared to the Hadfield steel, the experimental steels possess a higher strength, plasticity, hardness and the same resistance to impact wear. TEM studies of the surface layer after impact treatment revealed a mixture of the amorphous phase, nanocrystals and fine-twinned austenite. At the same time, using Mössbauer spectroscopy of conversion electrons, the ferromagnetic ordering was found in the surface layer of up to 10 μm in depth, which is the sign of the strain-induced martensitic phase. The hypothesis of a transition from the low-spin to the high-spin state of the iron atoms within the thin twins in austenite was proposed in order to interpret the discrepancy between TEM and Mössbauer studies. Potentiodynamic measurements and immersion tests show that the CrMnCN steels possess a significantly higher pitting potential and resistance to general corrosion in comparison with Hadfield steel.     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

双层地下室空气冲击波特性的模型试验研究

高层建筑多层地下室内人防结构顶板核爆荷载的合理确定是目前人防结构设计中亟待解决的问题。文中在对实际工程的调查基础上，研究了双层地下室的试验模型，进行了空气冲击波在地下室模型内传播的爆炸试验，分析了作用在双层地下室底层结构顶板的爆炸压力分布特性，并得出多层地下室的底层顶板核爆荷载一般要小于单层地下室顶板核爆荷载设计值的结论．     

Use of fluorescence to probe the surface dynamics during disorder-to-order transition and cluster formation in dihalonaphthalene-water thin films on Al2O3(0001)

Amorphous dihalonaphthalenes that are prepared by vacuum deposition onto a cold Al₂O₃ surface form electronically excited dimers when optically pumped, and their emission is characteristically red-shifted, broad and featureless compared to the monomeric fluorescence. If the surface is heated, the adlayer undergoes a disorder-to-order transition at a temperature characteristic of the molecule. Since pure crystalline dihalonaphthalenes typically fluoresce and do not exhibit excimeric features, the transition was studied by taking advantage of the changes in the spectral characteristics of the adlayer. These included transmittance, and emission from fluorescence and excimer. The combination of these methods allowed a close look at the surface dynamics of molecules on the surface of Al₂O₃ as the adlayer was heated from the deposition temperature to desorption.If a bilayer is formed by depositing water onto the surface with the organic adlayer on top, water, with its lower desorption energy, can be made to percolate into the organic layer. The optical probes indicate that the water clearly associates with the organic molecules while the excess water desorbs. By varying the coverage of either the water or the dihalonaphthalene, the stoichiometric composition of the cluster can be determined and are reported here.     

Filtered vacuum arc deposition of transparent conducting Al-doped ZnO films

Transparent conducting ZnO:Al and ZnO films of 380-800 nm thickness were deposited on glass substrates by filtered vacuum arc deposition (FVAD), using a cylindrical Zn cathode doped with 5-6 at.% Al or a pure Zn cathode in oxygen background gas with pressure P = 0.4-0.93 Pa. The crystalline structure, composition and electrical and optical properties of the films were studied as functions of P. The films were stored under ambient air conditions and the variation of their resistance as function of storage time was monitored over a period of several months.The Al concentration in the film was found to be 0.006-0.008 at.%, i.e., a few orders of magnitude lower than that in the cathode material. However, this low Al content influenced the film resistivity, ρ, and its stability. The resistivity of as-deposited ZnO:Al films, ρ = (6-8) × 10^− 3 Ω cm, was independent of P and lower by a factor of 2 in comparison to that of the ZnO films deposited by the same FVAD system. The ρ of ZnO films 60 days after deposition increased by a factor of ∼ 7 with respect to as-deposited films. The ZnO:Al films deposited with P = 0.47-0.6 Pa were more stable, their ρ first slowly increased during the storage time (1.1-1.4 times with respect to as-deposited films), and then stabilized after 30-45 days.