刹车盘结构对车轮及整车流场的影响

为研究车轮刹车盘结构对旋转车轮和整车流场气动特性的影响,针对是否存在刹车盘两种情况分别建立等比例模型,采用可实现的k-ε两方程模型计算,对比分析气动升、阻力因数,表面压力因数及整体与局部流场,发现刹车盘结构在简化车体上对车轮局部和整车流场都具有突出影响,指出在整车气动特性模拟中刹车盘存在的必要性.进一步进行计算模型选择的研究,发现旋转壁面模型与多坐标参考系(Multiple Reference Frame,MRF)模型对旋转车轮的流场特性模拟结果有差异,在近车轮区域表现尤为明显.     

汽车发动机冷却风扇仿真方法对比

对比多参考坐标系(Multiple Reference Frame,MRF)模型和滑移网格模型(Sliding Mesh Model,SMM)在分析中的差异,分别应用FLUENT中的三维N-S方程和RNG湍流模型,对发动机冷却风扇的静止和旋转区域进行数值模拟,得到流道内空气的质量流量及风扇叶片表面的压力和速度矢量分布.SMM的结果更接近真实结果;根据SMM得出的结果说明MRF模型在工程领域的应用.     

Dynamic output feedback control of a flexible air-breathing hypersonic vehicle via T–S fuzzy approach

By utilising Takagi–Sugeno (T–S) fuzzy set approach, this paper addresses the robust H_∞ dynamic output feedback control for the non-linear longitudinal model of flexible air-breathing hypersonic vehicles (FAHVs). The flight control of FAHVs is highly challenging due to the unique dynamic characteristics, and the intricate couplings between the engine and fight dynamics and external disturbance. Because of the dynamics’ enormous complexity, currently, only the longitudinal dynamics models of FAHVs have been used for controller design. In this work, T–S fuzzy modelling technique is utilised to approach the non-linear dynamics of FAHVs, then a fuzzy model is developed for the output tracking problem of FAHVs. The fuzzy model contains parameter uncertainties and disturbance, which can approach the non-linear dynamics of FAHVs more exactly. The flexible models of FAHVs are difficult to measure because of the complex dynamics and the strong couplings, thus a full-order dynamic output feedback controller is designed for the fuzzy model. A robust H_∞ controller is designed for the obtained closed-loop system. By utilising the Lyapunov functional approach, sufficient solvability conditions for such controllers are established in terms of linear matrix inequalities. Finally, the effectiveness of the proposed T–S fuzzy dynamic output feedback control method is demonstrated by numerical simulations.     

A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion

This article investigates the basic combustion parameters including start of the ignition timing, burn duration, cycle-to-cycle variation, and carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NO_x) emissions of homogeneous charge compression ignition (HCCI) engines fueled with primary reference fuels (PRFs) and their mixtures. Two primary reference fuels, n-heptane and iso-octane, and their blends with RON25, RON50, RON75, and RON90 were evaluated. The experimental results show that, in the first-stage combustion, the start of ignition retards, the maximum heat release rate decreases, and the pressure rising and the temperature rising during the first-stage combustion decrease with the increase of the research octane number (RON). Furthermore, the cumulative heat release in the first-stage combustion is strongly dependent on the concentration of n-heptane in the mixture. The start of ignition of the second-stage combustion is linear with the start of ignition of the first-stage. The combustion duration of the second-stage combustion decreases with the increase of the equivalence ration and the decrease of the octane number. The cycle-to-cycle variation improved with the decrease of the octane number.     

Assessment of biological nitrogen fixation

The four commonly used methods for measuring biological nitrogen fixation (BNF) in plants are: the total nitrogen difference (TND) method, acetylene reduction assay (ARA) technique, xylem-solute (or ureide production) method and the use of¹⁵N labelled compounds.The TND method relies on a control non-N₂-fixing plant to estimate the amount of N absorbed by the fixing plant from soil. It is one of the simplest and least expensive methods, but works best under low soil N conditions. The ARA technique measures the rate of acetylene conversion to ethylene by the N₂-fixing enzyme, nitrogenase. The ethylene produced can then be converted into N₂ fixed, using a conversion ratio, originally recommended as 3. Although the method is inexpensive and highly sensitive, its major disadvantages are, the short-term nature of the assays, the doubtful validity of always using a conversion ratio of 3 and the auto-inhibition of acetylene conversion to ethylene. The ARA technique is therefore not a method of choice for measuring BNF.The xylem-solute technique can be used to measure BNF for those species that produce significant quantities of ureide as product of BNF. Although simple and relatively inexpensive, it is an instantaneous assay and also needs to be calibrated against a known method. The most serious limitation is, that only a small proportion of N₂-fixing plants examined are ureide exporters, and the method is therefore not widely applicable.The¹⁵N methods, classified into the isotope dilution and A-value methods, appear to be the most accurate, but also the most expensive. They involve labelling soil with¹⁵N fertilizer and using a non-N₂-fixing reference plant to measure the¹⁵N/¹⁴N ratio in the soil. The¹⁵N isotope dilution approach is both operationally and mathematically simpler than the A-value approach. To limit potential errors in the selection of reference crops, it is recommended to use¹⁵N labelled compounds or soil labelling methods that result in the slow release of¹⁵N or the slow decline of¹⁵N/¹⁴N ratio in the soil. Additionally, the use of several reference plants rather than a single one can improve the accuracy of the results.     

全参考图像质量评价综述

图像质量评价是图像处理领域内一项很有意义的研究课题。客观图像质量评价方法可分为全参考评价方法、半参考评价方法和无参考评价方法, 目前全参考评价方法较为成熟, 而半参考和无参考评价方法则处于初级阶段, 远远达不到参考评价方法所能达到的效果。对全参考评价方法进行综述。首先简要地介绍了各种类型的评价方法, 其次详细地介绍了PSNR、SSIM、MSSIM、IFC、VIF、FSIM等几种典型的全参考图像质量评价方法, 然后在LIVE和TID2008数据库上进行实验, 对这几种全参考方法进行对比、分析, 最后探讨图像质量评价研究的发展趋势。     

Pricing strategies with reference effects in competitive industries

This paper examines the effect of reference prices on companies operating within competitive industries. We confirm that even with competition, firms optimally price high in the short term to generate a high reference price and then decrease this price over time. Competitors' prices converge toward each other over time, emphasizing the short‐term nature of reference prices. We then show that pricing optimally to take advantage of reference prices generates a positive externality for other firms in an industry, such that competitors may generate higher profit. The longer the focus of a given firm, the more profit the firm generates, but less relative to its competitors. This arises because the externalities created through pricing high to increase reference prices outweigh the benefits of the higher reference prices themselves. If pricing managers are compensated relative to their competition, this suggests that short‐termism may be implicitly encouraged to the detriment of profit.     

一种利用历史数据构造虚拟标签的定位算法

在RFID定位算法中,利用接收信号强度统计模型进行直接定位的精确度不高,而利用实际参考标签定位存在信号易碰撞、外出部署不便等问题,因此提出一种基于虚拟标签的RFID定位算法VIREH以克服以上缺点.该算法利用历史数据构建虚拟参考标签,然后利用虚拟参考标签代替实际参考标签进行定位.依据VIREH算法,开发基于Android移动设备的RFID定位系统,在系统中使用VIREH算法进行定位,对定位误差进行了统计以测试算法性能.测试结果表明,VIREH算法的定位精度较直接定位有显著提高,较使用实际参考标签没有明显降低,有助于提高RFID定位精度.     

[火用]分析环境模型及其确立原则的研究

对现有的环境模型和有关环境模型的理论进行了评述和分析，指出了确定环境模型的理论以及现有的环境模型中存在的问题，提出了比较系统的确定环境模型的理论原则。     

氨内参比法测定尿素熔融液中缩二脲含量

研究了尿素熔融液中缩二脲含量测定时各种消除氨干扰的方法，确定了氨内参比法可作为消除氨干扰的最佳方法，完善了该法应用时的具体操作步骤，建立了一个适用于尿素合成各工段尿液中缩二脲含量测定的简单、快速、准确的分析方法。