用扩冲法修复凹形护环的新工艺

详细介绍了用扩冲法对液压胀形出现凹形的护环进行修复的方法。实践证明,扩冲法修复护环简单、经济、实用。     

护环液压胀形法的新发展及外补液胀形法的生产应用

本文论述了现有液压胀形法生产护环所存在的不足,介绍了新一代液压胀形工艺即外补液胀形的原理、优点,以及在我国首次生产应用中所显示出的明显的技术经济效益。     

Influence of heat treatment on fracture and magnetic properties of radially oriented Sm2Co17 permanent magnets

The quenching, fracture and aging treatment of radially oriented Sm2Co17 ring magnets were investigated. The results indicate that the ring magnets have obvious anisotropy of thermal expansion, which easily leads to the splits of the magnets during quenching. The fracture is brittle cleavage fracture. The difference （Aa） of the expansion coefficient reaches the maximum value at 800-850 ℃. So, various quenching processes at different steps are adopted in order to reduce the splits. When the magnets are aged, 1：5 phase precipitates from the 2：17 matrix phase and forms a cellular microstructure with 2：17 phase. BHmax and JHc reach the maximum value 226 kJ/m^3 and 2 170 kA/m after being aged at 850 ℃ for 4 h and 8 h, respectively. The aging treatment at 850 ℃ has little influence on remanence（Br）, which can always keep a high value （≥1.0 T）. Through appropriate heat treatment, the ring magnets have uniform cellular microstructure and excellent magnetic properties： Br ≥ 1.0T, JHc ≥2 100 kA/m, BHmax ≥ 220 kJ/m^3.     

晶界碳化物对Fe-Cr15-Ni25合金蠕变裂纹扩展行为的影响SCIEI

在两种不同晶界状态下研究了Fe-Cr15-Ni25合金的蠕变裂纹扩展行为。单相合金的空洞在晶界三叉点处形核,而对晶界上有碳化物析出的合金,空洞在晶界碳化物上形核。晶界碳化物阻碍了空洞的长大和连接,因而大大提高了蠕变裂纹扩展抗力。     

TiAl合金精密铸件缩孔的定量预测

研究了TiAl合金叶片铸件液态熔池孤立区形成的判定方法及缩孔的预测模型，对缩孔形成过程进行了模拟显示。研究表明，利用这种方法模拟缩孔缺陷可以提高铸件模拟缩孔预测精度。     

预焙铝电解槽阳极钢爪自焙保护环优化技术

就目前预焙铝电解槽所用的自焙保护环的制作进行了研究．提出了优化方案，通过工业试验认为．自焙保护环的制作技术优化后．可以给企业创造显著的经济效益。     

柴油机活塞环耐磨性探讨

通过分析活塞环的基体组织、径向弹力与气缸套的匹配以及对其施行表面处理，以提高活塞环的耐磨性。对活塞环进行调质或渗氮处理，可显著提高其使用寿命。     

GCr15钢轴承套圈的磨削开裂失效分析

通过金相分析及断口观察，对GCr15钢轴承套圈的磨削开裂进行了系统分析。结果表明．淬火裂纹是套圈失效的根本原因，而原材料中Cr的带状偏析、套圈表面的应力集中、淬火加热时的氧化脱碳以及不当的磨削工序则共同加剧了淬火裂纹的萌生和扩展。     

聚醚多元醇中环状齐聚物的去除(续)

(接上期第 2 3页 )3　膜分离Doraietal[16] 通过超滤除去低相对分子质量级份 ,使聚醚多元醇 ,尤其是聚四氢呋喃多元醇 ,具有较窄的分布 (Mw∶Mn=1 .2～ 1 .8)。该方法通过对多分散的熔融聚合物实施物理分级 ,达到降低相对分子质量分布的目的 ,可使最终产物的相对分子质量为 40 0～ 40 0 0 ,分散度为 1 .2～ 1 .8。该方法首先需要准备 1套交叉流动的膜分离系统 ,采用渗透膜或半渗透膜 ,膜的一边是滞留物 ,另一边是超滤液。然后 ,在起始聚合物的熔点以上 ,分解温度以下 ,且温度不大于膜的熔融和分解温度 ,将起始聚合物熔融 ,并流入该系统中…     

Bubble Formation at a Rotating Cylindrical Surface in Cross‐Flowing Liquid

A novel method of gas sparging from a rotating cylinder is proposed, which prevents against formation of large attached gas cavities in cross‐flowing liquids including those flowing downwards. Experimental and theoretical results regarding critical rotation speed necessary to remove the attached cavity, bubble formation process and size distribution of the produced bubbles in a low viscosity system (air‐water) are presented in this study.