双稳态孤子

对于具有一定形式非线性的薛定谔方程，存在单孤子解的多稳态，也就是说对于相同能量，单孤子具有不同的传输常数．本文以一非线住形式Ｌｉｎｅａｒ　Ｓｍｏｏｔｈ　Ｓｔｅｐ（ＬＳＳ）函数为例，对孤子的双稳态进行理论分析，并对其双稳态的光学转换进行数值模拟．     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

帧中继交换技术

本文论述了帧中继交换的概念、标准，结构、特点网络式样及在互连网中的应用。     

起重机吊钩拖动绕线电动机他励双高调速系统

本文提出励磁电流可自动控制的他励式双高调速系统设计方案。系统在提升特别是在下放重物时，具有较硬的机械性；在负载１０－１００％的变化范围内，可实现最大偏差Δｎｍａｘ／ｎｍｉｎ１００％≤１０％，调速范围Ｄ≥１０；在满载运行条件下，可节约电能８０％以上。     

GLOBAL: A Design for Random Testability Algorithm

1MotivationsIncreasingdensityofVLSIchipsmakesthecostoftestingveryexpensive.Designfortestabilitycantemperthisproblemdrastically.Therearetwokindsofsolutions:(i)localsolutionl3'2]withlowcomputingcomplexity,whichcannotalwaysgetsatisfactoryresults;(ii)globa.lsolutionwithprohibitivecomputingcomplekityl1'5].T.H.Chen'andM.A.Breuer[1lpresentedanILPmodeltoplacetestpointsglobally.Becauseofitscomputingcomplealty,[1lcanonlydealwithsmallormediumscalecircuits.SCOAPisusedin[1],whichisnotaveryaccuratet…     

反向回转双激振器振动机控制同步的理论研究

本文对两激振器作反向回转的振动机控制同步进行了理论研究和计算机仿真。推导出了考虑质心偏移时两主轴的转矩差方程，在此基础上建立了控制系统的数学模型，设计了具有鲁棒性的非线性变结构滑模控制器．仿真结果表明，控制同步不仅可以消除由质心偏移、电机特性差等原因引起的稳态相位差，同时还能大大降低瞬态相位差，从而使机体的振动方向保持不变，减小起、制动过程中机体的摇摆振动．     

角调谐飞秒同步泵浦KTP红外光参量振荡器

用平均输出功率为１．１Ｗ，脉宽为９０ｆｓ的商用再生锁模Ｔｉ：Ｓａｐｐｈｉｒｅ激光器作为泵浦源，用ＫＴＰ作为非线性光学介质，制成一台同步泵浦飞秒光学参量振荡器。其输出调谐范围为１．０４μｍ至１．２６μｍ，平均输出功率在１００ｍｗ左右，脉宽仅约１００ｆｓ。     

Flashover voltage characteristics of contaminated station insulators under temporary ac overvoltages in the ac system connected with a frequency converter station

According to the recent analysis results of temporary ac overvoltage in the ac system connected with a frequency converter station, large-magnitude over-voltages were confirmed to occur under some special system conditions. Most of the station insulators currently used cannot withstand such overvoltages according to an evaluation based on the data obtained earlier. The necessity of tests to be done to evaluate such performance more accurately was recognized. Both power frequency and switching impulse overvoltage flashover tests were made on contaminated insulators by the method well simulating the natural wetting condition. Switching impulse flashover voltage with the waveshape having a long wavefront time of 2 ms can be well correlated with the flashover voltage characteristics of temporary ac overvoltage. Higher flashover voltage characteristics were obtained by a clean fog test method compared with those obtained by equivalent fog test method.     

公伯峡水电站高压电缆设计几个技术问题分析

结合公伯峡水电站电缆系统设计，对合理选择电缆截面、敷设方式及保护措施等技术问题加以介绍。由于目前电缆设计标准不太完善，因此设计中应结合电站具体情况，合理地选择和提出技术要求。