汽轮机组振动信号的测量与分析

针对目前汽轮机组振动的特点,将振动信号分为两类,即轴振（相对振动）和瓦振（绝对振动）。首先分析了汽轮机组的振动概况及其对机组的影响;然后分别介绍了机组振动的测量和分析方法。具体地从传感器谈起,解释了机组的轴振和瓦振的不同测量原理。针对振动的三要素即振幅、频率及相位分别做了介绍;最后以300MW机组为例,说明其振动测点的一般布置。     

基于DSP的列车信号处理算法分析

介绍一种互相关检测解调算法用于列车交通信号的检测,可将不同制式下的各种高频信号送DSP进行处理,提取出承载列车控制信号的低频信号,以便分析其中的载频信息和低频信息;对互相关检测算法流程作了分析说明,提出该算法在DSP器件上的基本实现方案,并给出了部分实验数据;采用互相关解调算法(能量算法)对轨道信号进行解调,具有运算速度快、精度高、抗干扰性能好和对硬件资源要求低等特点;经过反复的轨道信号实测,完全符合国家标准。     

连铸结晶器振动在线监测系统的研制

在连铸生产过程中,为了精确调节结晶器振动参数、提高钢坯质量,利用加速度信号的双重积分获得结晶器振动参数的方法,研制了连铸结晶器实时在线监测系统。该系统实现了对结晶器振动性能指标的自动检测。试验及现场应用表明,该监测系统可对结晶器产生偏振以及不按照非正弦规律振动等现象进行精确监测,能够满足连铸生产现场的监测要求。     

Error analysis of task performance with laptop in vibration environment

The present study investigates influences of vibration directions, vibration magnitudes, object sizes, object distances and angles of approach on producing errors while performing pointing and clicking activity on a laptop monitor similar to passengers working on moving trains. Attempts made outside the boundary of an object while performing the activity is registered as an error. The number of errors produced under different exposure conditions is computed. Higher vibration magnitudes, smaller size of the objects, and diagonal angular movements are found to create more errors and affected accuracy of the activity and hence showed difficulties to perform the activity.     

光纤束传感器测量轴系扭转振动的研究

介绍了一种运用光纤束传感器结合双条纹编码盘、测量轴系扭振的系统.论述了该测量系统的实现原理、系统构成、采样时间对扭振测量精度的影响,以及系统误差.将该系统在某型号航空设备上进行模拟实验,验证了该测量系统具备高精度、安装方便、抗干扰能力强等优点,对于回转机械的扭振检测和故障诊断具有很好的实用价值.     

基于电磁力的FBG电流传感器研究

利用通电螺线管与永磁铁之间的作用力,提出了一种测量电流的方法.光纤Bragg光栅(FBG)在永磁铁的牵引下发生轴向应变,引起Bragg中心波长的漂移,通过解调中心波长漂移量对电流进行测量.实验中采取多匝数螺线管和小电流来模拟大电流,对0-3A的直流电流进行了测量.实验结果表明:中心波长漂移量与电流有很好的线性关系,线性...     

Whole-body vibration exposure experienced by motorcycle riders – An evaluation according to ISO 2631-1 and ISO 2631-5 standards

Riders of twelve motorcycles, comprising 6 full-scale motorbikes and 6 motor-scooters, and 5 sedan vehicles, performed test runs on a 20.6 km paved road composed of 5 km, 5 km, and 10.6 km of rural, provincial and urban routes, respectively. Each test run of motorcycle was separately performed under speed limits of 55 km/h and 40 km/h. Tri-axial accelerations of whole-body vibration (WBV) were obtained by using a seat pad and a portable data logger, and the driver's view was videotaped with a portable media recorder. Root mean square (RMS) acceleration, 8-h estimated vibration dose value (VDV₍₈₎) and 8-h estimated daily dose of static compression dose (S_ed) were determined from the collected data in accordance with ISO 2631-1 and ISO 2631-5 standards. Experimental results indicate that the WBV values of the sedan vehicle drivers have low RMS, VDV₍₈₎ and S_ed values (RMS 0.27–0.32 m/s²; VDV₍₈₎ 6.3–8.3 m/s^1.75; S_ed 0.21–0.26 MPa). However, over 90% of the motorcycle riders had VDV₍₈₎ (mean 23.5 m/s^1.75) exceeding the upper boundary of health guidance caution zone (17 m/s^1.75) recommended by ISO 2631-1, or had S_ed (mean 1.17 MPa) exceeding the value associated with a high probability of adverse health effects (0.8 MPa) recommended by ISO 2631-5. Over 50% of the motorcycle riders reached these boundary values for VDV and S_e in less than 2 h. The WBV exposure levels of the full-scale motorbikes riders and motor-scooter riders were not significantly different. However, the RMS and VDV₍₈₎ values of motorcycle riders indicate significant roadway effect (p < 0.001), while their S_ed values indicate significant speed limit effect (p < 0.05). This study concludes that the WBV exposure levels of common motorcycle riders are distinctively higher than those of sedans, even on a regular paved road. The impact on health of WBV exposure in motorcycle riders should be carefully addressed with reference to ISO 2631-1 and ISO 2631-5.

Relevance to industry

This study compares the predicted health risks of motorcycle riders according to ISO 2631-1 and ISO 2631-5 standards. Experimental data suggest that the vibration dose value of ISO 2631-1 and daily dose of equivalent static compression stress of ISO 2631-5 have roughly equivalent boundaries for probable health effects.     

First-principles calculation of L10 -disorder phase equilibria for Fe–Ni system

By combining Cluster Variation Method with FLAPW electronic structure total energy calculations and the Debye–Grüneisen theory within quasi-harmonic approximation, L1₀-disorder phase equilibria for Fe–Ni system are calculated. The transition temperature, 483 K, determined in the present calculation is lower than that obtained in the previous calculation without thermal vibration effects. The decrease of the transition temperature is ascribed to the enhanced phase stability of a disordered phase due to the thermal softening of a lattice.     

Research on the application of 4-weighted fractional Fourier transform in communication system

The paper reveals the relationship between the weighting coefficients and weighted functions via the research of coefficients matrix and based on the original definition of 4-weighted fractional Fourier transform(4-WFRFT).The multi-parameters expression of weighting coefficients are given.Moreover, the 4-WFRFT of discrete sequences is defined by introducing DFT into it, which makes it suitable for digital communication systems.After analyzing the properties of WFRFT, a typical scheme for modulation/demodula...     

Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution

Based on the First-order Shear Deformation Theory (FSDT) this paper focuses on the dynamic behavior of moderately thick functionally graded conical, cylindrical shells and annular plates. The last two structures are obtained as special cases of the conical shell formulation. The treatment is developed within the theory of linear elasticity, when materials are assumed to be isotropic and inhomogeneous through the thickness direction. The two-constituent functionally graded shell consists of ceramic and metal. These constituents are graded through the thickness, from one surface of the shell to the other. A generalization of the power-law distribution presented in literature is proposed. Two different four-parameter power-law distributions are considered for the ceramic volume fraction. Some material profiles through the functionally graded shell thickness are illustrated by varying the four parameters of power-law distributions. For the first power-law distribution, the bottom surface of the structure is ceramic rich, whereas the top surface can be metal rich, ceramic rich or made of a mixture of the two constituents and on the contrary for the second one. Symmetric and asymmetric volume fraction profiles are presented in this paper. The homogeneous isotropic material can be inferred as a special case of functionally graded materials (FGM). The governing equations of motion are expressed as functions of five kinematic parameters, by using the constitutive and kinematic relationships. The solution is given in terms of generalized displacement components of the points lying on the middle surface of the shell. The discretization of the system equations by means of the Generalized Differential Quadrature (GDQ) method leads to a standard linear eigenvalue problem, where two independent variables are involved without using the Fourier modal expansion methodology. Numerical results concerning six types of shell structures illustrate the influence of the power-law exponent, of the power-law distribution and of the choice of the four parameters on the mechanical behaviour of shell structures considered.