MPLS技术在全球范围内的争议

MPLS技术兼具了IP技术的灵活性和ATM技术交换速度快、有QoS保证、流量控制等诸多优点,可以解决网络中存在的拥塞、QoS、VPN支持和组播等方面的一系列问题,是一种新兴的IP骨干网技术。但经过几年的实践,人们对它的能力提出怀疑出现了争论。从MPLS这几年的发展历程看,MPLS是目前最有希望的下一代骨干网技术之一,但它并不象原来设想的那样,可以解决网络中存在的所有问题。     

局域网语音实时传输的实现

语音实时传输是语音聊天软件的核心技术。文中在分析语音实时传输原理的前提下,探讨了局域网语音实时传输的设备的初始化、内存分配、语音录制、播放和传输等具体方法,并以C Builder6.0提供的控件为基础,以API函数给为工具,给出了局域网实时语音聊天的具体实例,实现了局域网用户间的语音实时传输。     

Cryogenic temperature measurement for large applications

We have developed a resistance thermometry system for the acquisition, control and monitoring of temperature in large-scale cryogenic applications. The resistance of the sensor is converted to a voltage using a self-balancing AC bridge circuit featuring square-wave excitation currents down to 1 nA. The system is easily scalable and includes intelligent features to treat special situations such as magnet quenches different from normal operation.     

双相位编码在数据通信中的应用

双相位码是数据串行通信和记录中使用的一种编码方法。在集散控制系统中使用的磁带机和飞行数据记录器中得到广泛应用。本文主要介绍双相位码的编码、译码原理及双相位码的特点;重点论述双相位码的编码和译码过程在微机上的实现。工程实践和实验表明,用微机实现双相位码的编码和译码过程是切实可行的。试用在TDC-2000集散控制系统中获得了圆满成功。     

乳胶厚度对卤化银反射全息图衍射特性的影响

实验研究了自制的超细颗粒卤化银乳剂SDUF－1分别在AAC显影、改进的R－10漂白处理及改进的GP－8溶解物理显影处理条件下，其乳胶厚度对反射全息图衍射特性的影响。实验结果表明，在这两种不同处理条件下衍射效率与胶厚的关系有相当大的差别，合适的乳胶厚度分别为12μm和6μm左右。     

离轴数字全息记录条件的研究

用振幅全息和菲涅耳衍射理论,分析离轴数字全息记录系统结构参数对数字全息再现的影响,并进行相应的实验验证。理论分析和实验研究结果都表明,如果记录物体和CCD的尺寸固定,记录物体和CCD之间的记录距离将直接影响数字全息再现像的分离状况和系统的分辨率,在保证再现像分离的前提下,缩短物体和CCD之间的距离将有利于数字全息再现像分辨率的提高。     

Optical data storage by novel photoelectrochromic polymer

A novel elastic polymer containing 4,4′-bipyridinium salts with tetrakis[3,5-bis(trifluoromethyl)phenyl]borate as part of the main chain was synthesized. The cast film showed persistent and reversible colour changes due to photoinduced electron transfer upon excitation of an ion-pair charge-transfer band (_ex >365 nm) in vacuo. The lifetime of the coloured state markedly depended on temperature. The optically written data were stored without decay below 0°C and were erased thermally at elevated temperatures. The colour changes were reversibly repeatable for many times.     

Micromagnetic simulation of FeCo write head in perpendicular recording hard disk drives

The single-pole tip (SPT) heads made of the high saturation FeCo ferromagnetic metals are crucial for the actualization of ultrahigh density perpendicular recording. The effective head field distribution in the medium is of key importance for the design of the SPT head, which would be analyzed by micromagnetic simulations in this work. Two 3D micromagnetic models of the SPT head were established to select a more appropriate method of modeling, with a magnetostatic image effect or a real soft magnetic material to model the image of the SPT head in soft under layer (SUL). The results from these two designs were tested and compared to the ideal head field calculated by the Jacobi finite element method (FEM); and the design with the real soft magnetic material as image was proved suitable for simulating the ultrahigh density perpendicular recording write head.     

多量程数据采集记录装置的设计

通常的数据采集与记录装置不易实现多量程测量。通过对标度方程进行分析得知,要改变量程只须改变两个参数——标度因子和量程下限。我们设计了一个使用单片机的多量程数据采集和记录装置,能处理多达256种量程。本文叙述了算法分析、硬件和软件的设计以及该装置的性能指标。     

深亚微米光记录测试仪

详细描述了进行亚微米、深亚微米光记录和探测的测试仪器，其探测功率可达30mW，最小的探测时间为20ns，探测的最小光点200nm左右，带有CCD观察的系统可方便地定位及进行图像处理，整个测量过程均在计算机控制下进行，操作非常方便，它是对高密度光盘材料记录性能进行测量，以及对深亚微米，乃至纳米记录材料进行研究的有效工具。